Loading ...
Loading ...
Loading ...
5
Package
information
Packaging materials of the product are manufactured
from recyclable materials in accordance with our
National Environment Regulations. Do not dispose
of the packaging materials together with the domestic or
other wastes. Take them to the packaging material
collection points designated by the local authorities.
Do not forget:
If you want to
contribute to the re-evaluation of the
packaging materials, you can consult environmentalist
organizations
or your local municipality.
HC warning
If your product's cooling system contains R600a:
This gas is flammable. Therefore, pay attention to
not damaging the cooling system and piping during
usage and transportation. In the event of damage,
usage, and transportation. In the event of damage,
keep your product away from potential fire sources
that can cause the product to catch fire and ventilate
the room in which the unit is placed.
Ignore this warning if your product's
cooling
system
contains R134a.
The type of gas used in the product is stated on
the rating label which is on the left wall inside the
refrigerator.
Never throw the product in an
incinerator for disposal.
Recommendations for the fresh food
compartment (OPTIONAL)
Do not allow the food to touch the
temperature sensor in fresh food
compartment. To allow the fresh food
compartment to keep its ideal storage, the
temperature sensor must not be hindered by
food.
Do not place hot foods in the product.
3 Installation
If the steps and information in this
user manual are not followed and
considered, the manufacturer is not
liable for damages.
Things to pay attention to when
relocating the refrigerator:
1.
Your refrigerator
should
be unplugged. Before
the transportation of your refrigerator, it should be
emptied and cleaned.
2.
Before it is re-packaged, the shelves, accessories, crisper,
and other loose items
inside your refrigerator should be
fixed with adhesive
tape and be secured against
impacts. The package should
be bound with thick
tape or strong ropes and the
transportation rules
on the package should be strictly observed.
3.
Original packaging and foam materials should be
kept for future transportation or moving.
Check the following before you start to use your
Energy Saving Tips
Do not leave the doors of your
refrigerator open for a long time.
•
Do not put hot food or drinks in your refrigerator.
•
Do not overload your refrigerator so that the air circulation
inside of it is not prevented.
•
Do not install your refrigerator under direct sunlight
or near heat-emitting appliances such as ovens,
dishwashers, or radiators. Keep your refrigerator at
least 30cm away from heat-emitting sources and at
least 5cm from electrical ovens.
•
Keep your food in
closed containers.
•
For units with a freezer compartment:
You can
store a larger amount of food items in the freezer
when you
remove the shelf or drawer of the
freezer. The energy
consumption value stated for
your refrigerator has been
determined by removing
the freezer shelf or drawer and under maximum
load.
•
Thawing frozen food in the refrigerator
compartment will save
energy and preserve the
food quality.
Before you start the refrigerator,
1.
Clean the interior of the refrigerator as recommended in the
“Maintenance and cleaning” section.
2.
Connect the plug of the refrigerator to the wall socket. When
the refrigerator door is opened, the refrigerator’s internal
lamp will turn on.
3.
When the compressor starts to operate, a sound will be
heard. The liquid and gases sealed within the refrigeration
system cause noise when running, even if the compressor is
not
running and this is quite normal.
4.
The front edges and both sides of the refrigerator may feel
warm.
This is normal. These areas
are
designed to be warm to
avoid
condensation.
Important:
The
connection
must
follow
national and local electrical
regulations.
•
The power plug must be easily
accessible after installation.
•
Electrical safety of your refrigerator shall be guaranteed only
if
the earth system in your house complies with standards.
•
The voltage stated on the label located on the left inner
side of your product should be equal to your
network
voltage.
•
Extension cables and multi-plugs must not be used.
Loading ...
Loading ...
Loading ...