Loading ...
Loading ...
Loading ...
Keyboard Stand Assembly
39
YDP-165, YDP-145, YDP-S55, YDP-S35 Owner’s Manual
6. (YDP-S55 only) With the non-felt
side of the front board facing the
front (pedal side), fix it with thin
screws (4 × 12 mm).
Install so that the gap between the side boards (L)
and (R) is equal on both sides.
7. Connect the pedal cord plug and the
power plug.
7-1 Insert the pedal cord plug to the
[TO PEDAL] jack from the rear.
Insert the plug until the metal part disappears
from view.
NOTICE
If it is not plugged in firmly, it may cause the pedals to
not work.
7-2
Wind the cord holder around pedal cord to
hold it.
The cord holder is attached to the side board (L).
7-3 (YDP-S55 only) Connect the power cord to
the AC adaptor.
7-4 Insert the DC plug into the DC IN jack.
8. Rotate the adjuster until it presses in
firm contact with the floor surface.
Make sure that the pedal box does not rattle or
give way when you step on the pedals.
× 2
Felt
Front board back side
Thin screws (4 × 12 mm)
Back board
Main unit
Front board
Side
board
(L)
Side
board
(R)
7-1
7-4
7-2
TO PEDAL
DC IN
Cord
holder
Metal part
To press against
the floor
To separate from
the floor
Loading ...
Loading ...
Loading ...