Loading ...
Loading ...
Loading ...
Note: Prior to assembly remove protective film from stainless steel parts
Fig. 1
Wheel Channel
Cart Assemblw Door Stops & Door Pivot Bolts
1. Attach the two L-shaped sides to the back portion
of the cart, making sure the two holes face up &
the key holes are on the top, using the (4) self
tapping hex head screws. (See Fig. 1)
Note: Apower screwdriver is required to install the
screws-be cautious not to over-tighten and strip
the screws.
.Set the base on the top of the cart assembly, with
large opening closer to back portion of cart, and
align the eight mounting holes. Then set the 2
wheel channels on the base and attach them using
the (8) bolts provided, from inside the cart
upwards through wheel channels. (See Fig. 2)
Note: Tighten the bolts securely
3. Door Stop: Insert Door Stop Bolt downward
from bottom side of Cart Base through the hole
found in the right/front of the base. (See Fig 3)
.Screw Rubber Cap onto Bolt from the topside of
Cart Base and tighten securely. (See Fig 4)
.Door Pivot Bolt: Insert Bolt downward from
bottom side of Cart Base through the hole %und
in the left/front of the base and secure with
bolt. (See Fig. 2)
Fig. 4
Fig. 2
Fig. 3
Loading ...
Loading ...
Loading ...