Loading ...
Loading ...
Loading ...
17
Auto Power Off
To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be
adjusted from P:00 to P:02.
To change the setting:
1Press the [On/Off] button.
2 Hold down the “A” button (see page 15) and press [Start/Resume] until the display indicates
“H:0x” (x can be any number).
3 Release both buttons.
4 Press the “A” button until the display indicates “P:0x”.
5 Press the “C” button until the display corresponds with your requirements.
P:00 = dishwasher does not turn off automatically
P:01 = dishwasher turns off automatically after 1 minute
P:02 = dishwasher turns off automatically after 120 minutes (2 hours)
6 Press [Start/Resume] to save the setting.
Child Lock
1Start the desired cycle.
2 Hold down the button that says “Child Lock” underneath it for approximately 3 seconds until the
display reads “CL”.
3 The “CL” will be indicated now if any button is pressed and the program will not be reset.
To deactivate the child lock, hold down the “Child Lock” button for approximately 3 seconds until the
display no longer reads “CL”.
Aquastop® Leak Protection
Our AquaStop® system contains leaks through a precisely engineered tub and sensor system that works
with our solid molded base. If a leak has occurred, it shuts down operation and automatically pumps
out water to avoid contact with the floor. It works 24/7 and can turn itself on.
Loading ...
Loading ...
Loading ...