Loading ...
Loading ...
Loading ...
8 Care and maintenance
Fitting the door seal
The joint X must be at the bottom in the middle.
▸ Fit the seal starting in one of the corners at the
top.
▸ Insert the clip so that it hooks into the outer
slot.
▸ Once the seal is fitted at the top, insert the bot-
tom two clips.
▸ Lightly press the seal into the groove all
around, i.e. along the top, bottom, left and
right.
1.
2.
3.
4.
X
Checking the seal is seated properly
All four clips must be hooked in.
▸ If not, remove the seal and put the corner hooks in again.
▸ Lightly press the seal into the groove all around, i.e. along the top, bottom, left and
right.
8.9 Replacing the halogen light bulb
WARNING: Risk of electric shock!
Disconnect the appliance from the mains power supply before replacing the halo-
gen light bulb.
Risk of burns from hot surfaces!
Allow the halogen light bulb and the appliance to cool down before replacing the
halogen light bulb.
Do not touch the halogen light bulb with bare hands. Instead, use a fine, dry,
grease-free cloth.
Overhead illumination
▸ Carefully unscrew the glass light cover 1 anti-
clockwise and remove.
▸ Take out the faulty halogen light bulb.
▸ Carefully plug the new halogen light bulb into
the socket – halogen type G9 / 25W / 230V.
▸ Turning clockwise, screw the glass light cover
back in place.
▸ Reconnect the power supply.
1
53
Loading ...
Loading ...
Loading ...