Loading ...
Loading ...
Loading ...
13
Function Description Symbol
Automatic switch
o
Each cook zone is pre-set with a maximum operation time.
Once this time is reached, the zone will automatically switch
o. The residual heat symbol will be displayed if the surface
remains hot.
N/A
Pan detection
If no pan or an unsuitable pan is detected on an activated
cook zone, the pan detection symbol will be displayed.
Suitable pans - cast iron, metals with magnetic properties.
Non-suitable pans - copper, stainless steel, aluminium, glass,
ceramic, terra-cotta.
Booster function
The booster function temporarily increases the power
to a cook zone allowing for a faster heat up time. It will
deactivate automatically after 5 minutes on the rear and
centre cook zones or if a lower power level is selected.
Bridge function
Individual cook zones can be bridged or joined together to
create a larger, single controlled cook zone. By bridging the
left hand front and rear zones or the right hand front and
rear zones, two larger cook zones can be created.
Pause
When at least one cooking zone is in operation, the pause
function can be activated. This will pause all cooking on the
hob for up to 10 minutes.
Recall function
While the hob is in use, if it is accidentally turned o, turn
the hob back on within 6 seconds and the settings will be
restored.
N/A
Child lock
Child lock can be activated to stop the hob from being
accidentally turned on.
USING THE HOB
6 Caution: Always ensure that induction
pans remain within the marked cooking
area when hot. Do not allow hob pans to
rest on the user control panel at the front
of the hob glass, as this will cause the
controls to overheat and the appliance to
temporarily shut down.
4
Please be aware that the pans can make
a noise during cooking. This is caused by
vibration due to the passage of energy
from the hob to the pan.
Switching the appliance On/Off
1
Press and hold the On/Off key to activate the
appliance
Loading ...
Loading ...
Loading ...