Dewalt DXGN6000 6000 Watt Commercial Generator

Instruction Manual - Page 15

For DXGN6000. Series: DXGN Series

PDF File Manual, 40 pages, Read Online | Download pdf file

DXGN6000 photo
Loading ...
Loading ...
Loading ...
15
0068660
GENERAL STORAGE GUIDELINES
GASOLINE FUEL FUMES ARE
FLAMMABLE. DO NOT STORE YOUR GENSET IN ANY
AREA THAT IS INDOOR OR IN POORLY VENTILATED
AREAS. GASOLINE FUEL FUMES CAN IGNITE IN THE
PRESENCE OF ANY OPEN FLAME, PILOT LIGHT, CLOTHES
DRYER, WATER HEATER, ETC.
Your generator should be started and operated for
several minutes at least every 30 days. When the generator
set is not being operated or is being stored more than one
month, follow these instructions:
1. Replenish engine oil to upper level.
2. Run the generator, then close the fuel shut-off valve and
allow the unit to run until the engine stops.
3. Move the engine switch to the “OFF” position. (Turn
the key switch to “OFF” on the DXGN14000 model).
4. After the unit has cooled, drain gasoline from fuel tank,
fuel line and carburetor.
5. Pour about one teaspoon of engine oil through the spark
plug hole, pull the recoil starter several times and replace
the plug. Then pull the starter until you feel the piston is
on its compression stroke and leave it in that position. This
closes both the intake and exhaust valves to prevent the
inside of the cylinder from rusting.
6. Cover the unit and store in a clean, dry place that is well
ventilated away from open flame or sparks.
We recommend always using a fuel
stabilizer. A fuel stabilizer will minimize the formulation of
fuel gum deposits during storage. The fuel stabilizer can
be added to the gasoline in the fuel tank, or into the
gasoline in a storage container.
English
GENERAL MAINTENANCE
Proper maintenance and service are required to achieve maximum engine life and maintain warranty. The following tables provide
engine specifications as well as maintenance schedules for the generator engines. Note that the generator models are
referenced with the engine model. An engine owner's manual is provided with each machine that also provides basic
maintenance and troubleshooting information. Defer to the engine manufacturers manual if any discrepancies appear between
the data provided in this manual and the engine owner's manual. Full engine service manuals are available from American Honda
Motor Co., 4900 Marconi Drive, Alpharetta, GA 30005-8847, (800) 910-1293.
ENGINE SPECIFICATIONS AND CAPACITIES
Model GX270 (DXGN4500) GX340 (DXGN6000) GX390 (DXGN7200) GX630 (DXGN14000)
Type 4-stroke, overhead vale single cylinder, inclined 25°
4-stroke, overhead valve,
V-Twin
Displacement 270cc (16.5 cu in) 389cc (23.7 cu in) 389cc (23.7 cu in) 688cc (42.0 cu in)
Bore and Stroke
73 x 58 mm
(2.9 x 2.3 in)
88 x 64 mm
(3.5 x 2.5 in)
88 x 64 mm
(3.5 x 2.5 in)
78 x 72 mm
(3.1 x 2.8 in)
Net HP 8.5 hp @3600rpm 10.7 hp @3600rpm 11.7 hp @3600rpm 20.2hp @3600rpm
Net Torque
14.1ft-lb @2500rpm 19.5ft-lb @2500rpm 19.5ft-lb @2500rpm 35.1ft-lb @2500rpm
Compression Ratio 8.5 : 1 8.2 : 1 8.2 : 1 9.3 : 1
Cooling System Forced-air
Ignition System Transistorized magneto
Ignition Timing
25° B.T.D.C. (fixed)
Spark Plug BPR6ES (NGK), W20EPR-U (Nippondenso)
Carburetor Horizontal type, butterfly valve
Air Cleaner Dual element type
Lubricating System Splash Forced Oil
Oil Capacity 1.1l (1.16 US qt) 1.1l (1.16 US qt) 1.1l (1.16 US qt) 2.0 l (2.1 US qt)
Starting System Recoil Recoil Recoil/Electric Electric
Stopping System Ignition primary circuit ground
Fuel Type Unleaded gasoline (86 pump octane)
PTO Shaft Rotation Counterclockwise (from PTO side)
Dry Weight 25.0 kg (55.1 lb) 31.5 kg (69 lb) 31.5 kg (69 lb) 44.0 kg (96.8 lb)
NOTICE:
Loading ...
Loading ...
Loading ...