Loading ...
Loading ...
Loading ...
Consumer Defined Controls
Note: The Consumer Defined ControU features are adjustments to the controU that wHUnot affect cooking resuUts, These
include the Oven Lockout, Silent Control Operation and Temperature Display features,
Setting Oven Lockout Feature
The _ pad controls the Oven Lockout feature, The Oven Lockout feature automatically locks the oven door and prevents
the Oven from being turned on, it does not disable the clock, Kitchen Timer or the interior oven lights,
mNSTRUCTmONS PRESS DISPLAY
To activate the Oven Lockout feature
1,
2,
Press and hold for 3 seconds (Figure 1),
After 3 seconds "LOC" wiii appear, a beep wiii sound and "BOOR
LOCKED" will flash in the display, Once the oven door is locked
the "BOOR LOCKED" indicator wiii stop flashing and remain on
along with the "LOC",
To reactivate norma_ oven operation:
1, Press and hold for 3 seconds, A beep wiii sound, "LOC" wiii
disepear and "BOOR LOCKED" wiii flash in the display until the
oven door has completely unlocked (figure 2),
for 3 seconds
for 3 seconds
Figure 1
Figure 2
2, The wall oven is again fully operational,
Setting Silent Contro_ Operation
The START TIME _a 9 and CLEAN _ea'.} pads control the Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without sounds or beeps whenever necessary, if desired the control can
be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
mNSTRUCTmONS PRESS DISPLAY
To change contro_ from norma_ sound operation to
silent contro_ operation
1. To tell if your range is set for normal or silent operation press and
hold _[b' "0:00" will appear and "DELAY" will flash in the display
(Figure 3). After 7 seconds ":SP" will appear in the display (Figure 4).
2. Press _tea'n}to switch between normal sound operation and silent
d
operation mode. The display will show either ":SP" (Figure 4) or
":--" (Figure 5).
if ":SP" appears (Figure 4), the control will operate with normal
sounds and beeps, if ":--" appears (Figure 5), the control is in the
silent operation mode.
Figure 3
Figure 4
Figure 5
3, Press to accept the change or press to reject the or
change.
2O
Loading ...
Loading ...
Loading ...