Loading ...
Loading ...
Loading ...
User’s Manual
2-10
Note:
The VSL program allows multiple users to connect to the
network scanner at anytime. Yet, the scanner operation can
be used by one user at a time. If the network scanner is
being used by other user, you will be prompted with a
message to connect the scanner later. When the scanner is
available, you will also be prompted with a message to
connect the scanner and start scanning your document.
If the network scanner has not been found, it is probably the
scanner and your computer are not in the same LAN. In this
case, you can assign a specific IP address of the scanner to
let [Virtual Scanner Link] automatically search the scanner.
Click the [Option] button, type your IP address on the
[Searching Address] field (1), then click the [+] button (2)
and finally click [OK] (3) to complete.
Searching Time: When the program is launched, it
automatically searches the scanner in the network in 5
seconds (default). The searching time can be changed from
a range of 5 to 20 seconds.
If the [Virtual Scanner Link] program has been closed and
then launched again, [Virtual Scanner Link] will
automatically search and connect the network scanner it has
previously connected to.
(1)
(3)
(2)
Loading ...
Loading ...
Loading ...