Loading ...
Loading ...
Loading ...
8 9
1. Power off the Ice Maker and unplug it from the wall outlet.
2. If residual water is found in the Ice Tray, gently push the Ice Tray
back so that all water drains into the Water Tank.
3. Take out the Ice Basket. Clean the interior with a soft cloth
soaked with warm water and diluted detergent.
4. Use water to rinse the interior and drain out all the water by
unplugging the Water Drain Cap on the front bottom of the Ice
Maker (see Fig. 6).
5. Replace the Water Drain Cap well in position.
6. Clean the exterior with a soft, damp cloth. Use a mild
dishwashing soap, if necessary.
• Do not clean the Evaporator.
• Do not clean your Ice Maker with ammable uids. The fumes
can create a re hazard or explosion.
• Empty the Water Tank and dry it for storage if the Ice Maker is
not in use for an extended period of time.
Cleaning & Maintenance
To keep your ice tasting fresh and your Ice Maker looking great, clean your Ice Maker regularly.
Fig. 6
PROBLEM POSSIBLE CAUSES SOLUTIONS
“ADD WATER” Indicator
lights up.
Low water level or out of water. Turn the Ice Maker off, rell water, and turn it on.
“ICE FULL” Indicator lights
up.
The Ice Basket is full. Remove the ice from the Ice Basket.
The Ice Full Sensors do not work.
• Wipe out any objects on the Sensors and restart the Ice
Maker.
• Call us at 646.490.9904.
“ADD WATER” and “ICE
FULL” Indicators light up
simultaneously.
The Ice Tray is not in the right position.
• Check if the Ice Tray is blocked by something.
• Unplug and plug it again, then press the “ON/OFF”
button to restart.
The ice collects together.
The ice-making cycle is too long. Stop making ice and restart after the ice melts.
The water temperature is too cold. Fill the Water Tank with warmer water.
The Ice Maker runs through
its normal cycle but no ice is
produced.
The ambient temperature or water
temperature is too high.
Operate the Ice Maker at an environment with an ambient
temperature between 50°F and 90°F. Fill the Water Tank with
water ranges between 46°F and 77°F.
Refrigerating system leaks or is
blocked.
Call us at 646.490.9904.
The Ice Maker does not stop
working even when full.
Direct or reected sunlight may cause
malfunction of the Ice Full Sensors.
Move the Ice Maker to a darker location.
Poor ice-making result. Poor heat dissipation.
Leave an 8-inch clearance on each side of the Ice Maker for
proper ventilation.
Troubleshooting
Do not try to repair the Ice Maker yourself. Doing so invalidates the warranty.
*Specications are subject to change without notice.
Vremi® offers a limited one year warranty (“warranty period”) on all of our products purchased new and unused from Vremi®, LLC
or an authorized reseller, with an original proof of purchase and where a defect has arisen, wholly or substantially, as a result of
faulty manufacture, parts, or workmanship during the warranty period. The warranty does not apply where damage is caused by
other factors, including without limitation: (a) normal wear and tear; (b) abuse, mishandling, accident, or failure to follow operating
instructions; (c) exposure to liquid or inltration of foreign particles; (d) servicing or modications of the product other than by Vremi®;
(e) commercial or non-household use.
The Vremi® warranty covers all costs related to restoring the proven defective product through repair or replacement of any defective
part and necessary labor, so that it conforms to its original specications. A replacement product may be provided instead of repairing
a defective product. Vremi®’s exclusive obligation under this warranty is limited to such repair or replacement.
The warranty becomes void if attempts at repair are made by non-authorized third parties and/or if spare parts, other than those
provided by Vremi®, are used.
These are our general terms for warranty service, but we always urge our customers to reach out to us with any issue, regardless of
warranty terms. If you have an issue with a Vremi® product, please contact us at 646-490-9904, and we will do our best to resolve it for
you.
This warranty gives you specic legal rights and you may have other legal rights, which vary from state to state, country to country, or
province to province. The customer may assert any such rights at their sole discretion.
Specications
Warranty
Applicable climate ST/SN/T/N
Class I
Input 120 V ~ 60 Hz
Rated power 120 W
Dimension (D*W*H) 13.7*9.8*11.4 in / 348*248*290 mm
Net weight 20.86 lbs / 9.48 kg
Loading ...
Loading ...
Loading ...