Loading ...
Loading ...
Loading ...
STEP 3 (See Diagram 3)
A.) Attach the Leg Developer (#7) to the open bracket on the Front Post (#5). Secure it
with one M8 x 3” Allen Bolt (#30), two Ø 5/8” Washers (#37), and one M8 Aircraft
Nut (#33).
B.) Attach the pivot on Backrest Support (#8) to the open bracket on Main Seat Support
(#4). Secure it with one M12 x 3 ½” Allen Bolt (#39), two Ø 1” Washers (#36), and
one M12 Aircraft Nut (#34).
C.) Attach the pivot on Incline Support (#9) to the open bracket on Backrest Support.
Secure it with one M10 x 2 3/8” Allen Bolt (#31), two Ø ¾” Washers (#35), and one
M10 Aircraft Nut (#34). Attach the other end of Incline Support onto the selected
slot on Main Seat Support to obtain the desired Backrest incline.
D.) Note: Do not over tighten the Nut and Bolt to the pivot. The Backrest Support
and Incline Support need to be able to move smoothly. DIAGRAM 3
7
Loading ...
Loading ...
Loading ...