Loading ...
Loading ...
Loading ...
Detergent en
31
6. Press to save the setting.
a The LEDs go out.
12.3 Switching rinse aid sys-
tem off
If you find the rinse aid refill indicator
irritating, e.g. when using combined
detergents with a rinse aid compon-
ent, you can switch the rinse aid sys-
tem off.
Tip:The function of rinse aid is lim-
ited with combined detergents. You
will generally get better results using
rinse aid.
1. Press .
2. Press and hold and until
and flash.
3. Release buttons.
4. Press repeatedly until flashes.
5. Press repeatedly until no LED
lights up (level 0).
6. Press to save the setting.
a The LEDs go out.
a The rinse aid system is switched
off and the rinse aid refill indicator
is deactivated.
13 Detergent
Find out which detergents are suit-
able for your appliance.
13.1 Suitable detergents
Only use detergents that are suitable
for dishwashers. Both separate and
combined detergents are suitable.
For optimum washing and drying res-
ults, use separate detergent, adding
Special salt →Page28 and Rinse aid
→Page30 separately.
Modern, powerful detergents mainly
use a low-alkaline formulation with
enzymes. Enzymes break down
starch and remove protein. Oxygen-
based bleaching agents are generally
used to remove coloured marks, e.g.
tea or ketchup.
Note:Follow the manufacturer's in-
structions for each detergent.
Detergent Description
Tabs Tabs are suitable for
all cleaning functions
and do not need to
be measured out.
With shorter Pro-
grammes tabs some-
times do not dissolve
entirely and leave
residues of deter-
gent. This may im-
pair the cleaning ef-
fect.
Powder de-
tergent
Powder detergent is
recommended for
shorter Programmes.
The dosage can be
adjusted to the level
of soiling.
Liquid deter-
gent
Liquid detergent
works faster and is
recommended for
shorter Programmes
without PreRinse.
Sometimes liquid de-
tergent may leak out
despite the detergent
dispenser being
closed. This is not a
fault and is non-crit-
ical if you remember
the following:
¡ Only choose a
programme
without PreRinse.
¡ Do not select
timer program-
ming for starting
the programme.
Loading ...
Loading ...
Loading ...