Tripp Lite SMART3000RM2UN Eaton Tripp Lite series SmartPro UPS User's Guide

Loading ...

Eaton Tripp Lite Series SmartPro User Guide 614-40194—Rev 04 13

Table 7. Power Supply Connection Steps

1. Connect the UPS input cable (13) to the AC power source.

2. Connect the loads to the UPS. It is preferable to connect

the priority loads to the outlets marked (3) and the non-

priority loads to the outlets Group1, Group2 (4) that can be

programmed.programmed.

For the SmartPro2200 / 3000 models, connect any high-

power devices or matching Power Distribution Unit (PDU)

to the L5-20R or L5-30R outlet.

3. To program shutdown and startup of the Group1 and

Group2 outlets in order to extend battery runtime and

perform scheduled shutdowns, please see the XREF "In/

Out settings" section.

33..66 CCoonnnneeccttiioonn wwiitthh aa FFlleexxPPDDUU ((PPoowweerr DDiissttrriibbuuttiioonn UUnniitt)) ooppttiioonnaall mmoodduullee

Table 8. FlexPDU Connection Steps

1. Connect the UPS power cord (13) to the AC power source.

2. Connect the input cord of the FlexPDU module (24) to one of the UPS

outlets (3).

3. Connect the equipment to the outlets (41) on the FlexPDU module.

These outlets differ, depending on the version of the FlexPDU

module.

33..77 CCoonnnneeccttiioonn wwiitthh aa HHoottSSwwaapp MMBBPP ((MMaaiinntteennaannccee BByyPPaassss)) ooppttiioonnaall mmoodduullee

The HotSwap MBP module makes it possible to service or even replace the UPS without affecting the

connected loads (HotSwap function).

Connection with a FlexPDU (Power Distribution Unit) optional module

Loading ...

Tripp Lite SMART3000RM2UN series SmartPro 3000VA 3000W 120V Line-Interactive Sine Wave UPS - 7 Outlets, Network Card Included, LCD, USB, DB9, 2U Rack/Tower