Loading ...
Loading ...
Loading ...
6. PREPARING A BEVERAGE
6. 1 ONE CAPSULE (E. G. LUNGO)
1
Check ifthe water tank contains enough fresh drinking
water. Switch on machine. Power button starts blinking red
while machine is heating up for approximately 40 seconds.
Afterwards power button lights steady green. Machine is
ready to be used.
2
To adjust drip tray position: Turn drip tray counter
clockwise to unlock it. Lift it to the desired positionand
lock it by turning itclockwise until it clicks. The drip tray is
locked.
3
Place cup with correctcup size on drip tray. See
"BEVERAGE EXAMPLES" or package. Open locking handle.
Pull out capsule holder. Make sure rinsing tool is not
inside. Insert capsule in capsule holder. Insert it back into
machine. Close locking handle.
4
Push selectionlever to the "HOT" or "COLD" position as
recommended on capsule packs. Beverage preparation
starts.
STOP
5
Stay beside the machine throughout the preparation!After
reaching the desired level push selection lever to the
“STOP” position. Machine stops preparation.
6
After finishing preparation the power button blinks red for
about 5 seconds. During that time do not open locking
handle!
7
After extraction is finished open locking handle. Remove cup
from drip tray. Wait around 1.5 minif you want to prepare a
second extra big cup.
8
Pull out capsule holder. Remove used capsule. Put used
capsule in dustbin.
9
Rinse capsule holder with freshdrinking water from both
sides. Dry capsule holder. Insert it back into machine.
Enjoy your beverage!
10
Loading ...
Loading ...
Loading ...