USER’S GUIDE
Version: RM12H-202110R
AIR CURTAINS
220V Heated Models: RM-1206H, RM-1209H, RM-1210H,
RM-1212H, RM-1215H
STOP! Check & Test before installing
1. Do NOT plug the power cord (if connected) into power source.
2. Look through the front grille panel, check if the fan wheel bearings are at
proper position at each end of the side panels inside.
3. If the fan wheels don’t line up straight, remove the front and side panel’s
screws and reseat the fan wheel bearings and align the motor to fix the
issues. Then replace the front and side panels back with tighten the
screws.
4. Connect the power cord (not included) to the air curtain power
connectors. Plug into 220V or 240V AC, 1 Phase, 60Hz power source
(NOT the regular home 110V or 120V, verify the power voltage if not
sure). Press the front power ON/OFF button to turn on. If the air curtain
works normally, refer to section 3 through 7 to install the air curtain.
Refer to section 10 for technical support.
5. If the fan wheel is broken, contact Awoco (refer to section 10) to get the
fan wheel replacement.
6. After installation, if the air curtain doesn’t run, first step is to check the
magnetic switch. Refer to section 7 for troubleshooting.
PLEASE READ AND SAVE THESE INSTRUCTIONS.
Loading ...
Loading ...
Loading ...
