Loading ...
Loading ...
Loading ...
4
Installation Specications
Continued on the next page.
Wet Sounds ZERO Series High-Output Coaxial Speakers Owner’s Manual
Tape the surrounding surface to prevent damaging the finish, and avoid
cutting outside the cut line to prevent improper fitment.
For speaker alignment, the terminal indicates the bottom of the speaker, and
the opposing lock tabs help for horizontal alignment.
Pre-drill the screw locations to
prevent surface cracking.
Recommended:
1/8 drill bit
Fasten the speaker with stainless
steel 5/32” x 1.25” Phillips screws.
Place the grille on the speaker in a
45° angle.
Apply downward pressure on the
grille and twist clockwise to lock.
We recommend checking if the mounting surface is flat with a square or level.
Mounting to a curved surface will damage the product.
4
5
3
6
2
1
7
Connect the speakers to the amplifier or source unit using spade connectors for
each terminal.
8
45°
Top
lock tab lock tab
Bottom
mounting surfacemounting surface
Loading ...
Loading ...
Loading ...