Loading ...
Loading ...
Loading ...
TO ADJUST DEPTH OF CUT FOR FIXED BASE
ROUTERS
See Figures 12, 13, and 14.
Follow these steps to adjust depth of cut for fixed base
touters.
1. Unplug the router.
,_ WARNING: Failure to unplug the tool could result
in serious injury due to accidental starting.
2. Place the router on a flat surface.
3. Loosen the locking arm.
LOCKING
ARM
4. Turn the depth adjustment ring counterclockwise
until the tip of the cutter touches the flat surface.
5. Turn the depth indicator ring until the zero lines up
with the indicator point on the base.
INDICATOR
POINT
DEPTI-
INDICATOR
RING
Fig. 13
6. Position the router so that the cutter can extend
below the subbase for desired depth of cut.
7. Turn the depth adjustment ring to obtain the desired
depth of cut.
8. Tighten the locking arm securely.
Note: To adjust the depth of cut when the router is
mounted to a router table, turn the depth adjustment
ring until the cutter reaches the desired depth of cut.
Fig. 12
Fig. 14
13
Loading ...
Loading ...
Loading ...