Loading ...
Loading ...
Loading ...
PREPARATION OF THE FLYBAR
Place the flybar and remove the side pins
from the transport position. The front
bracket will rotate, so lock it. Fix the front
brackets in vertical position locking the
pins in position 2.
Recheck the Locking pin is securely locked
by briefly pulling the Locking pin towards
you.
PICK UP POINT POSITIONING
The pickup is asymmetric and can be fit
in two positions (A and B). The A position
brings the shackle towards the front. The B
position allows an intermediate step using
the same fixing holes.
Fix the pickup bracket with the two pins on
the bracket’s lanyard to lock the pickup.
RCF Easy Shape Designer will provide 3 values:
- A NUMBER from 1 to 28, which indicates the position of the first pin (considered from the flybar front)
- A or B, indicating the orientation of the pickup point
- F, C or R indicating where to screw the shackle. F (Front) C (Center) R (Rear)
For example:
Configuration “14 B C”: first pin on hole number 14, pickup point on “B” position, shackle screwed on hole “C”.
Loading ...
Loading ...
Loading ...