Loading ...
Loading ...
Loading ...
SYMBOLS DESIGNATION EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
no No Load Speed Rational speed, at no load
Alternating Current Type of current
/min Per Minute
Revolutions, strokes, surface speed, orbits, etc.,
per minute
Safety Alert Indicates a potential personal injury hazard.
Read The Operator’s Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this
product.
Eye Protection
Always wear eye protection with side shields
marked to comply with ANSI Z87.1.
Wet Conditions Alert
Do not expose to rain or use in damp locations.
Risk of Injection
To reduce the risk of injection or injury, never
direct a water system toward people or pets or
place any body part in the stream. Leaking hoses
and ttings are also capable of causing injection
injury. Do not hold hoses or ttings.
Kickback
To reduce the risk of injury from kickback, hold the
spray wand securely with both hands when the
machine is on.
Electric Shock
Failure to use in dry conditions and to observe
safe practices can result in electric shock.
Chemical Burns
To reduce the risk of injury or damage, DO
NOT USE ACIDS, ALKALINES, BLEACHES,
SOLVENTS, FLAMMABLE MATERIAL, OR
INDUSTRIAL GRADE SOLUTIONS in this product.
Risk of Explosion
Do not spray ammable liquids. Flammable liquids,
fuel, and their vapors are explosive and can cause
severe burns or death.
6
SYMBOLS
6
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
Loading ...
Loading ...
Loading ...