Loading ...
Loading ...
Loading ...
WaJJ SJeeve Brands: #5 Sears or Carrier 51S Series
185/8. Deep
TopView
\
1. Redirect the louvers at the back of the wall sleeve as shown
opposite. The use of pliers is recommended.
2. Install (2) tapered spacer blocksto the floor of the sleeve as
shown. DO NOT CUT THESE BLOCKS. This helps induce
a rearward slope on the unit.
3. Install as shown with the tapered end ½" from the back of the
sleeve, This helps induce a rearward slope on the unit.
4. Attach (1) 1 ½" x 3/8" x 25" long seal inthe center at the top
of the sleeve. Remove the backing paper and press into
position.
5. Attach (2) 1 ½" x 3/8" x 14" seals to the left and rightsides
of the sleeve.
6.Cut (2) 1½" x3/8" x25" long seals to 14" long each
and attach to the vertical sections ofthe grilleas shown.
7. Center unit & gently slide unitinto sleeve.
8. Before sliding all-the=way back, remove 2nd screw from fi'ont
on leftside of unit.
9. Remove the plasticwasher _'om the screw,
!0. Screw and attach the other end of the ground wire to the
unitas shown in picture, Make sure that the toothed washer
isagainst the cabinet.
11, Slide the unitcompletely to the rear to ensure a good seal,
making sure the groundwire does not become tangled,
12. Seal & Frame the unitas described on the last page of
these instructions.
7
Loading ...
Loading ...
Loading ...