Philips GC8030/28 Pressurised steam irons generator

User Manual - Page 9

For GC8030/28. Also, The document are for others Philips models: GC8030*, GC7030*, GC7010*

PDF File Manual, 86 pages, Read Online | Download pdf file

GC8030/28 photo
Loading ...
Loading ...
Loading ...
Tips
- If the article consists of various kind of fibres, always select the
temperature required by the most delicate fibre, i.e. the lowest
temperature. If, for example, the fabric consists of 60% polyester and
40% cotton, it should be ironed at the temperature indicated for
polyester (2).
- If you do not know what kind of fabric(s) the article is made of,
determine the right ironing temperature by ironing a part that will
not be visible when you wear or use the article.
- Silk, woolen and synthetic materials: iron the reverse side of the
fabric to prevent shiny patches.
- Fabrics that tend to acquire shiny patches should be ironed in one
direction only (along with the nap) while applying very little pressure.
- Start ironing the articles that require the lowest ironing temperature,
i.e. those made of synthetic materials.
To make the iron cool down faster, simply apply steam or iron a
piece of cloth.
Using the appliance
Steam ironing
The supply hose may become hot during a long ironing session.
B
The system may occasionally produce a pumping sound during steam
ironing.This is normal and tells you that water is being pumped into the
steam tank.
1 Make sure there is enough water in the water tank.
Steam ironing is only possible at higher ironing temperatures
(higher than 2).
C
2 Press the steam activator to start steam ironing.
During steam ironing, the 'steam tank heating up' pilot light
(GC8030/GC7030 only) goes on from time to time to indicate
that the steam tank is heating up to maintain the right
temperature and pressure.
The opening and closing of the steam valve in the steam tank will
cause a clicking sound.This is perfectly normal.
Ironing without steam
1 Start ironing without pressing the steam activator.
ENGLISH 9
Loading ...
Loading ...
Loading ...