Loading ...
Loading ...
Loading ...
en Cleaning and servicing
24
5. Remove the shelf above the fruit
and vegetable container.
→Page25
13.2 Cleaning the appliance
WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
▶
Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
Liquid in the lighting or in the con-
trols can be dangerous.
▶
The rinsing water must not drip
into the lighting or controls.
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
▶
Do not use hard scouring pads or
cleaning sponges.
▶
Do not use harsh or abrasive de-
tergents.
▶
Do not use cleaning products with
a high alcohol content.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
▶
Never clean fittings and accessory
in the dishwasher.
1. Prepare the appliance for cleaning.
→Page23
2. Clean the appliance, the fittings,
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
3. Dry thoroughly with a soft, dry
cloth.
4. Insert the fittings and install the ap-
pliance components.
5. Electrically connect the appliance.
6. Putting the food into the appliance.
13.3 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
▶
Pull out, life and remove the shelf.
→Fig.
11
Removing the snack container
with holder
1. Remove the snack container.
2. Remove the shelf with the retainer.
3. Slide the holder out of the shelf po-
sition at the side.
→Fig.
12
Removing door rack
▶
Lift the door rack and remove it.
→Fig.
13
Removing the container divider
▶
Lift up and remove the container
divider.
→Fig.
14
Removing the storage container
1. Pull out the storage container as
far as it will go.
2. Lift the storage container at the
front
and remove it .
→Fig.
15
Removing the fruit and vegetable
container
1. Pull out the fruit and vegetable
container as far as it will go.
2. Lift the fruit and vegetable con-
tainer at the front
and remove it
.
→Fig.
16
Loading ...
Loading ...
Loading ...