Loading ...
Loading ...
Loading ...
13
FINAL INSTALLATION
4. Install the blade arm (Q) to the topside of the motor
assembly (H) with motor screws (J) previously
removed (Step 6, page 8). Tighten with Phillips
screwdriver (not included).
5. Remove one of the tter plate screws (L) preassembled
to the tter plate (K) on the underside of the motor
assembly (H) and loosen the other three. Feed the
9-pin connector through the center hole in the light pan
(M). Align the keyhole slots of the light pan (M) with
the loosened tter plate screws (L) and turn clockwise.
Replace the previously removed tter plate screw (L),
then tighten all screws.
6. Remove the three light pan screws (N) preassembled
to the light pan (M). Then, connect the 9-pin
connector from the fan to the 9-pin connector from
the light kit (O). Secure the light kit (O) to the light
pan (M) using the previously removed light pan
screws (N).
4
J
Q
L
KM
H
5
H
6
O
N
M
9-Pin Connector
Loading ...
Loading ...
Loading ...