Loading ...
Loading ...
Loading ...
Caring For Your Brewer
Brewer Features
Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning.
Brewer Exterior
Keep your Keurig® brewer looking its best
by cleaning the exterior from time to time.
Just clean with a damp, soapy, lint-free,
nonabrasive cloth. Never immerse the
brewer in water or other liquids.
Drip Tray
The drip tray overflow should be emptied
and cleaned occasionally. To remove, lift
up off brewer base, keeping it level to avoid
spilling. Rinse and clean with a damp, soapy,
lint-free, nonabrasive cloth. Hand-wash only.
Water Reservoir
The water reservoir should be cleaned
periodically by wiping the inside of the
reservoir and underside of the lid with a
damp, nonabrasive, lint-free cloth. Do not dry
the inside of the water reservoir with
a cloth, as lint may remain. Allow the
reservoir to dry completely. Hand-wash only.
Care For Your Frother
Clean immediately after each use and
before first use.
To Clean:
1. Remove frother from the base, remove
silicone ring from lid, and remove the whisk
from inside the frother.
2. Wash the silicone ring, lid, and whisk with
warm, soapy water.
3. Clean the interior of the frother with soap
and rinse with warm water. Use a soft,
nonabrasive cloth or sponge to prevent
damaging the inner coating.
4. Wipe the exterior with a soft, damp cloth.
5. Dry all parts thoroughly and reassemble for
next use.
NOTE: Frother is not dishwasher safe. Do not submerge frother
in water. Only use nonabrasive cleaning materials to prevent
damage to the inner surface of the frother.
12
OZ
OZ
OZ
10
8
SHOT
ADD
WATER
DESCALE
HOT AND COLD FROTHER: Use any fresh milk or dairy
alternative, like oat, almond, or soy.
BREW OVER ICE: Brews by starting hotter to extract full
flavor, then cooling down for less ice melt.
SHOT: Use any K-Cup® pod to brew a concentrated 2oz
coffee shot.
FAST & FRESH-BREWED: Coffee made in minutes.
BACK-TO-BACK BREWING: Immediately brew a second
cup; no need to wait for reheating.
TRAVEL MUG FRIENDLY: Accommodates travel mugs up
to 7.25” tall.
SIMPLE BUTTON CONTROLS: Just insert any K-Cup® pod
and use the button controls to brew a delicious cup.
MAINTENANCE ALERT: Reminds you to descale after
every 500 brews.
NOTE: Regular descaling enhances the taste of your coffee and the long-
term performance of your brewer.
COMPATIBLE WITH THE MY K-CUP® UNIVERSAL
REUSABLE COFFEE FILTER: Brew your own ground
coffee (sold separately).
AUTO OFF: Automatically turns your brewer off
5 minutes after the last brew for energy savings, but will
be ready to brew as soon as it is powered on again.
HIGH ALTITUDE BREWING: While holding the brewer
handle up, push down slowly on the K-Cup® pod in
the pod holder until the bottom of the K-Cup® pod is
punctured by the exit needle.
HIGH ALTITUDE: To ensure your coffee maker works
properly at higher altitudes (5,000 feet), please enable
the High Altitude Brewing Mode on your coffee maker.
1. Begin with the brewer plugged in and powered off.
2. Press and hold the BREW OVER ICE button and
10oz button for 3 seconds. The 12oz button will
illuminate to confirm that the High Altitude Mode
has been enabled.
High Altitude Mode will remain enabled until steps 1-2
are repeated and the 8oz light turns on to confirm that
the High Altitude Brewing Mode is disabled.
Loading ...
Loading ...
Loading ...