Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENTS
Fig. 36A
TO ADJUST SHIFT CONTROL LEVER
(See Fig. 36B)
Adjustment is only required if neutra! is not obtainedwhen shift
control lever is in neutral slot
o Place shift control lever in NEUTRAL position,
e Try to push tractor "Youshould be able to push when shift
control lever is in neutral position If you cannot push
,,tractor, adjust as fotiows
e Locate neutra! position with shift control lever
e Loosen screw'A' on shift bracket on top of transaxle
e Place shift control lever into the neutral slot
e Tighten screw 'AL
e Re-check adjustment as described above
NOTE: You should not be able to push tractor when shift control
lever iSin reverse or a forward range position,,
LEVER
BRACKET
Fig. 36B
TO REMOVE WHEEL FOR REPAIRS
(See Figs. 37A and 37B)
e Block up axle securely,
e On front wheels, remove hub cap, retaining ring and
washer(s) to remove wheel,
• On rear wheels, remove hub cap and bolts to remove
wheel,
e Repair tire and re-assemble
e On rear wheels,align holes and reinstaflbolts, Torque bolts
to 50 ft Ibs
• On front wheels, replace washer(s), and retaining ring
e Replace hubcaps.
FRONT TIRE AND RIM ASSEMBLY
jJ
FELT WASHER
FLATWASHER
FRONT AXLE
SPINDLE
FLATWASHER
RETAINER
HUB CAP RING
Figo37A
REAR TIRE AND RIM ASSEMBLY
REAR
AXLE
REAR WHEEL
HUB
BOLTS
HUB CAP
Fig. 37B
30
Loading ...
Loading ...
Loading ...