Operating instructions
Dishwashers
To avoid the risk of accidents or damage to the appliance, it is es-
sential to read these instructions as well as the installation sheet be-
fore it is installed and used for the first time.
en-GB M.-Nr. 12 211 800HG07
Contents
2
Warning and safety instructions ...................................................................... 5
Notes on the operating instructions................................................................ 15
Notes on the layout ............................................................................................. 15
Scope.................................................................................................................. 16
Guide to the appliance...................................................................................... 17
Appliance overview ............................................................................................. 17
Control panel....................................................................................................... 18
Display functions................................................................................................. 19
Caring for the environment .............................................................................. 20
Before using for the first time .......................................................................... 21
Opening the door ................................................................................................ 21
Closing the door.................................................................................................. 22
Activating the safety lock .................................................................................... 22
Basic settings...................................................................................................... 23
Setting the language ...................................................................................... 23
Setting the water hardness level .................................................................... 23
Dishwasher salt ................................................................................................... 25
Filling the salt reservoir................................................................................... 26
Refilling the salt .............................................................................................. 27
Rinse aid.............................................................................................................. 28
Adding rinse aid ............................................................................................. 29
Filling the rinse aid reservoir........................................................................... 29
Settings .............................................................................................................. 30
Opening the settings menu ................................................................................. 30
Changing settings ............................................................................................... 30
Closing the settings menu................................................................................... 30
Language ......................................................................................................... 31
Water hardness ................................................................................................... 31
Rinse aid.............................................................................................................. 32
Consumption (EcoFeedback) .............................................................................. 32
Display brightness............................................................................................... 33
Refill reminders.................................................................................................... 33
AutoOpen ............................................................................................................ 33
Extra clean........................................................................................................... 33
Extra dry .............................................................................................................. 33
2nd interim rinse.................................................................................................. 34
Hygiene cycle ...................................................................................................... 34
Software version.................................................................................................. 34
Contents
3
Showroom ........................................................................................................... 34
Factory default..................................................................................................... 34
Caring for the environment .............................................................................. 35
Economical dishwashing..................................................................................... 35
EcoFeedback consumption indicator.................................................................. 36
Loading the dishwasher.................................................................................... 37
General information............................................................................................. 37
Upper basket....................................................................................................... 39
Adjusting the upper basket ................................................................................. 41
Lower basket....................................................................................................... 42
Cutlery tray .......................................................................................................... 43
Loading the cutlery tray.................................................................................. 43
Loading examples ............................................................................................... 44
Dishwashers with cutlery tray......................................................................... 44
Detergent ........................................................................................................... 46
Active ingredients ............................................................................................... 46
Detergent dispensing .......................................................................................... 47
Adding detergent................................................................................................. 48
Operation............................................................................................................ 49
Switching on the dishwasher .............................................................................. 49
Selecting a programme ....................................................................................... 49
Display programme duration ............................................................................... 50
Starting the programme ...................................................................................... 50
End of programme............................................................................................... 51
Energy management ........................................................................................... 51
Switching off the dishwasher .............................................................................. 52
Unloading the crockery ....................................................................................... 52
Interrupting a programme.................................................................................... 53
Cancelling or changing a programme ................................................................. 53
Options ............................................................................................................... 54
Timer .............................................................................................................. 54
Guide for selecting a programme .................................................................... 56
Programme overview ........................................................................................ 58
Further programmes ...................................................................................... 60
Contents
4
Programme options........................................................................................... 61
Selecting programme options ............................................................................. 61
Express...................................................................................................... 61
IntenseZone.............................................................................................. 61
Cleaning and care ............................................................................................. 62
Cleaning the wash cabinet .................................................................................. 62
Cleaning the door and the door seal................................................................... 63
Cleaning the control panel .................................................................................. 63
Cleaning the appliance front ............................................................................... 64
Cleaning the spray arms...................................................................................... 65
Checking the filters in the wash cabinet ............................................................. 68
Cleaning the filters............................................................................................... 68
Cleaning the water inlet filter............................................................................... 70
Cleaning the drain pump..................................................................................... 71
Problem solving guide ...................................................................................... 73
Technical problems ............................................................................................. 73
Fault messages ................................................................................................... 74
Door release ........................................................................................................ 75
Water inlet fault ................................................................................................... 76
Water drainage fault ............................................................................................ 77
General problems with the dishwasher ............................................................... 78
Noises.................................................................................................................. 79
Unsatisfactory washing result ............................................................................. 80
Service................................................................................................................ 84
Contact in the event of a fault ............................................................................. 84
EPREL database ................................................................................................. 84
Warranty .............................................................................................................. 85
Note for test institutes ......................................................................................... 85
Optional accessories ........................................................................................ 86
Installation.......................................................................................................... 88
The Miele Waterproof system.............................................................................. 88
Water inlet ........................................................................................................... 88
Regulation in Germany........................................................................................ 89
Water drainage .................................................................................................... 90
Electrical connection .......................................................................................... 92
Technical data.................................................................................................... 93
Warning and safety instructions
5
This dishwasher conforms to current safety requirements. Inappro-
priate use can, however, lead to personal injury and material dam-
age.
Please observe the installation sheet and read the operating in-
structions carefully before setting up the dishwasher and using it
for the first time. They both contain important information on its in-
stallation, safety, use and maintenance. This is to protect yourself
from injury and prevent damage to the dishwasher.
In accordance with standard IEC60335-1, Miele expressly and
strongly advises that you read and follow the instructions in the
chapter on installing the dishwasher as well as the safety instruc-
tions and warnings.
Miele cannot be held liable for damage caused by non-compliance
with these instructions.
Keep the installation sheet and the operating instructions in a safe
place and pass them on to any future owner.
Warning and safety instructions
6
Appropriate use
This dishwasher is intended for use in domestic households and
similar working and residential environments.
This dishwasher is not intended for outdoor use.
This dishwasher is intended for use at altitudes of up to 4000m
above sea level.
This dishwasher must only be used for cleaning domestic crock-
ery and cutlery. All other types of use are not permitted.
The appliance can only be used by people with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge,
if they are supervised whilst using it, or have been shown how to use
it in a safe way and recognise and understand the consequences of
incorrect operation.
Warning and safety instructions
7
Safety with children
Children under 8 years of age must be kept away from the dish-
washer unless they are constantly supervised.
Children aged 8 and older may only use the dishwasher without
supervision if they have been shown how to use it in a safe manner.
Children must be able to understand and recognise the possible
dangers caused by incorrect operation.
Children must not be allowed to clean or maintain the dishwasher
unsupervised.
Children should be supervised in the vicinity of the dishwasher.
Never allow children to play with the dishwasher. There is a danger
that children might shut themselves in the dishwasher.
If the automatic door opening mechanism is active (depending on
the model), keep young children away from the area in which the
door opens. There is a danger of injury in the unlikely event of a fault
with the opening mechanism.
Danger of suffocation! Whilst playing, children may become en-
tangled in packaging material (such as plastic wrapping) or pull it
over their head and risk suffocation. Keep packaging material away
from children.
Keep children away from detergents. Detergents cause severe
skin burns and severe eye damage. They can cause burning in the
mouth and throat, or inhibit breathing. It is therefore important to
keep children away from the dishwasher when the door is open. De-
tergent residues could still be present in the dishwasher. Seek med-
ical advice immediately if a child has swallowed or inhaled any deter-
gents.
Warning and safety instructions
8
Technical safety
Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and re-
pairs must only be carried out by a qualified technician.
Damage to the dishwasher can compromise your safety. Before
using the dishwasher and in particular following transport, check it
for any visible damage. Never use a damaged dishwasher.
The electrical safety of this dishwasher can only be guaranteed
when correctly earthed. It is most important that this basic safety re-
quirement is present. If in doubt, the electrical installation should be
checked by a qualified electrician.
Miele cannot be held liable for the consequences of an inadequate
or lack of earthing system (e.g. electric shock).
Temporary or permanent operation on an autonomous power sup-
ply system or a power supply system that is not synchronised with
the mains power supply (e.g. island networks, back-up systems) is
possible. A prerequisite for operation is that the power supply sys-
tem complies with the specifications of EN50160 or an equivalent
standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronised with the mains power supply, or these measures must
be replaced by equivalent measures in the installation. As described,
for example, in the current version of BS OHSAS 18001–2 ISO
45001.
The dishwasher must only be plugged into the electricity supply
via a suitable switched socket using a fused 3-pin plug (it must not
be hard-wired). The electrical socket must be easily accessible after
the dishwasher is installed so that it can be disconnected from the
electricity supply at any time.
Warning and safety instructions
9
There must be no electrical sockets behind the dishwasher be-
cause the building-in niche may be too small. Danger of overheating
and fire risk if the dishwasher were to be pushed up against a plug.
The dishwasher must not be installed underneath a hob. The high
temperatures radiated by hobs could damage the dishwasher below.
For the same reason, the appliance must not be installed next to
open fires or other appliances that give off heat, such as heaters
etc., not normally found in a kitchen.
Ensure that the connection data on the dishwasher’s data plate
(fuse rating, frequency and voltage) match the mains electricity sup-
ply. This data must correspond in order to avoid the risk of damage
to the dishwasher. Compare these before connecting the appliance
to the mains. If in any doubt, consult a qualified electrician.
Do not connect the dishwasher to the mains supply until it has
been fully installed and any adjustment has been made to the door
springs.
The dishwasher may only be operated if the door opening mech-
anism is working correctly. Otherwise there could be a risk of danger
whilst the automatic door opening mechanism (depending on the
model) is active.
To check that the door opening mechanism is working correctly:
- The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). It is also important that the
door cannot fall open.
- The door locking pins automatically retract when the door opens
at the end of the drying phase.
Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance (fire hazard). Do not connect the
dishwasher to the mains electricity supply using a multi-socket ad-
apter or an extension lead.
Warning and safety instructions
10
The dishwasher must not be used in a non-stationary location
(e.g. on a ship).
Do not install the dishwasher in a room where there is a risk of
frost occurring. Frozen hoses are at risk of tearing or bursting. The
reliability of the electronic control unit may be impaired at temperat-
ures below freezing point.
To avoid any damage to the dishwasher, it must only be operated
when it is connected to a fully vented plumbing system.
The plastic housing of the water connection contains a solenoid
valve. The housing must not be dipped in water.
There are live wires in the water inlet hose. Do not cut the hose,
even if it is too long.
The integrated Waterproof system offers protection from water
damage, provided that the following conditions are met:
- Installation has been carried out correctly
- The dishwasher is properly maintained and parts are replaced
where this is noticeably required
- The stopcock is turned off during longer absences from the home
(e.g. whilst on holiday).
The Waterproof system will work even when the dishwasher is
switched off. However, the dishwasher must remain connected to
the electricity supply.
The water-connection pressure needs to be between 50 and
1,000kPa.
A damaged dishwasher could be dangerous. If the dishwasher
gets damaged, switch it off at the mains immediately and call your
Miele dealer or Miele Service.
While the appliance is under warranty, repairs should only be un-
dertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.
Warning and safety instructions
11
We recommend replacing defective components with original
spare parts. If original Miele spare parts are installed correctly, Miele
ensures full compliance with safety requirements and the warranty
remains valid.
During installation, maintenance and repair work, the dishwasher
must be disconnected from the mains electricity supply (switch it off
and withdraw the plug from the socket).
If the mains connection cable is damaged, it must only be re-
placed with a specific mains connection cable of the same type
(available from the Miele Customer Service Department). For safety
reasons this must only be done by the Miele Customer Service De-
partment or a Miele authorised technician.
Correct installation
The dishwasher must be installed and connected in compliance
with the supplied installation sheet.
Be careful before and while installing the dishwasher.
Some metal parts pose a risk of injury/being cut. Wear pro-
tective gloves.
The dishwasher must be correctly aligned horizontally to ensure
problem-free operation.
In order to ensure stability, built-under and integrated dishwashers
must only be installed under a continuous worktop that is secured to
adjacent cabinetry.
A sink in the adjacent cabinet of the dishwasher must be carefully
sealed. Regularly check for leaks to avoid damage to the dish-
washer.
The dishwasher must only be built into a tall unit if additional
safety precautions are taken. In order to safely install the appliance
in a tall unit, please use the Tall unit installation set and observe the
installation sheet provided. Otherwise there is the danger of the unit
tipping over.
Warning and safety instructions
12
The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). It is also important that the door
cannot fall open.
The appliance must only be operated with properly adjusted door
springs.
If the door cannot be adjusted properly, contact the Miele Customer
Service Department.
The maximum weight of the front panel that can be aligned with the
factory fitted door springs is 10–12kg (depending on model).
Correct use
Do not use solvents in the dishwasher. Risk of explosion.
Dishwasher detergents can cause burning on the skin and in the
eyes, nose, mouth and throat. Avoid contact with detergents. Do not
inhale powder detergents. Do not swallow dishwasher detergents.
Seek medical attention immediately if detergent has been swallowed
or inhaled.
Avoid leaving the dishwasher door open unnecessarily. You could
injure yourself on the open door or trip over it.
Do not sit or lean on the open door. The dishwasher could tip
over. This could injure you or damage the dishwasher.
Crockery may be very hot at the end of the programme. Allow the
dishes to cool until they are comfortable enough to handle before
unloading them.
Only use detergent and rinse aid formulated for domestic dish-
washers. Do not use washing-up liquid.
Do not use any commercial or industrial detergents. These may
cause material damage, and there is a risk of a severe explosive
chemical reaction (such as an explosive oxyhydrogen gas reaction).
Warning and safety instructions
13
Do not fill the rinse aid reservoir with powder or liquid detergent.
This will cause damage to the reservoir.
Do not fill the AutoDos (depending on model) with powder or li-
quid detergent. Loose detergent will damage the AutoDos.
Do not fill the salt reservoir with powder or liquid detergent. Deter-
gent will damage the water softener.
Only use special coarse-grained dishwasher salt or other pure kit-
chen salt for reactivation. Other salts may contain insoluble additives
that can impair the functioning of the water softener.
In dishwashers with a cutlery basket (depending on model), knives
and forks should be placed with the handles upwards in the basket
for safety reasons. Knives and forks placed with the handles down-
wards pose a danger of injury. However, cutlery placed handle down
in the basket will come out cleaner and drier.
Plastic items that cannot withstand being washed in hot water,
such as disposable plastic containers or plastic cutlery, should not
be cleaned in the dishwasher. The high temperatures in the dish-
washer may cause them to melt or lose shape.
If you use the timer option (depending on model), the detergent
compartment must be dry. If it is not, wipe it until dry. The detergent
will clump together if the detergent compartment is not dry, and this
may mean that it is not fully rinsed out.
Please observe the information given in the “Technical data”
chapter regarding the capacity of the dishwasher.
Accessories and spare parts
Only use original Miele accessories. If other parts are used, war-
ranty, performance and, if applicable, product liability claims will be
invalidated.
Warning and safety instructions
14
Miele will guarantee to supply functional spare parts for a min-
imum of 10years and up to 15years following the discontinuation of
your dishwasher.
Transport
Damage to the dishwasher can compromise your safety. Before
using the dishwasher, check it for any visible transport damage.
Never use a damaged dishwasher.
Only transport the dishwasher in an upright position so that no
water flows into the electrical controls, as this would cause faults.
If you wish to transport the dishwasher, empty it and securely
fasten all loose parts such as baskets, hoses and mains connection
cables.
Notes on the operating instructions
15
Notes on the layout
Warnings
Information which is important
for safety is highlighted in a thick
framed box with a warning symbol.
This alerts you to the potential
danger of injury to people or damage
to property.
Read these warning notes carefully
and observe the procedural instruc-
tions and codes of practice they de-
scribe.
Notes
Notes provide information of particu-
lar importance that must be ob-
served.
They are highlighted in a thick
framed box.
Additional information and com-
ments
Additional information and comments
are highlighted in a box framed with a
single black line.
Instructions for the user
Instructions on how to operate the dish-
washer are identified by marked operat-
ing steps. They explain the procedure
step by step.
Operating steps are indicated by a
black square bullet point.
Example:
Select the desired setting and press
OK to confirm.
Display
Information given via the dishwasher
display appears in a special display font
to match the font on the appliance.
Example:
When the message Close the door ap-
pears in the display...
Scope
16
The appliance is supplied with:
- Dishwasher
- Operating instructions for operating
the dishwasher
- Installation sheet for installing the
dishwasher
- Other installation accessories for in-
stalling the dishwasher (see installa-
tion sheet)
- Funnel for filling the dishwasher salt
- Additional printed matter and add-
ons if required
Guide to the appliance
17
Appliance overview
a
Door locking pins
b
Top spray arm
c
Cutlery tray (depending on model)
d
Upper basket (depending on model)
e
Middle spray arm
f
Aeration valve
g
Bottom spray arm
h
Filter combination
i
Salt reservoir
j
Data plate
k
Rinse aid reservoir
l
Detergent compartment
Guide to the appliance
18
Control panel
a
Programme selection
ECO = ECO
Auto = Auto45–65°C
45°C = Gentle45°C
65°C = QuickPowerWash65°C
75°C = Intensive75°C
= Further programmes/
settings
b
Display
For further information, see “Guide
to the appliance” in the “Display
functions” section.
c
Startbutton with indicator light
For starting the selected programme.
d
IntenseZone button
Increases cleaning performance in
the lower basket.
e
Express button
For reducing the programme dura-
tion.
f
Timer button
For selecting a later programme
start.
g
OK button
To select menu options and values
displayed.
To confirm messages.
h
buttons
For programme selection.
For changing the values displayed.
For scrolling to other menu pages.
i
Back button
For navigating back to the previous
menu or deleting values that have
been set previously.
j
Programme selection button
For programme selection.
k
Optical interface
For service technicians.
l
ON/OFF button
For switching the dishwasher on and
off.
Guide to the appliance
19
Display functions
The display is used to select or set the
following:
- The programme
- The timer
- The Settings
The display can show the following:
- The programme stage
- The estimated time left for the pro-
gramme to run
- The energy and water consumption
(EcoFeedback)
- Any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
Press the button to switch the dish-
washer back on.
The OKbutton is used to confirm mes-
sages or settings and also to move to
the next menu or another menu level.
Under Further programmes/settings,
a scroll bar will appear in the right of
the display. This offers further options.
These options can be shown using the
buttons.
You can alter the dishwasher’s controls
to suit changing requirements in the
Settings menu (see “Settings” chapter).
The option that is selected will have a
tick next to it.
To exit a sub-menu again, press the
Backbutton.
If you do not press any buttons for sev-
eral seconds, the display will revert to
the previous menu. You may then have
to enter your settings again.
Caring for the environment
20
Disposing of the packaging
material
The packaging material is used for
handling and protects the appliance
from transport damage. The packaging
material used is selected from materials
which are environmentally friendly for
disposal and can generally be recycled.
Recycling the packaging material re-
duces the use of raw materials. Use
material-specific collection points for
valuable materials and take advantage
of return options. Your Miele dealer will
take the packaging material away.
Disposing of your old appli-
ance
Electrical and electronic appliances
contain many valuable materials. They
also contain certain materials, com-
pounds and components which were
essential for their correct functioning
and safety. These could be hazardous
to human health and to the environment
if disposed of with household waste or
if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with household waste.
Instead, please make use of officially
designated collection and disposal
points to dispose of and recycle elec-
trical and electronic appliances in your
local community, with your dealer or
with Miele, free of charge. By law, you
are solely responsible for deleting any
personal data from the old appliance
prior to disposal. You are legally obliged
to remove any old batteries which are
not securely enclosed by the appliance
and to remove any lamps without des-
troying them, where this is possible.
These must be taken to a suitable col-
lection point where they can be handed
in free of charge. Please ensure that
your old appliance poses no risk to chil-
dren while being stored for disposal.
Before using for the first time
21
Every dishwasher is tested at the fact-
ory. There will be residual water in the
appliance from this test. It is not an in-
dication that the dishwasher has been
used previously.
Opening the door
In some programmes the door automat-
ically opens slightly to assist the drying
process.
This function can be deactivated, if pre-
ferred (see “Settings” chapter,
“AutoOpen”).
To open the door, reach under the
door grip and pull.
Open the door fully to disengage the
locking mechanism.
At the end of the programme, if the
AutoOpen function is on, the door lock-
ing pins automatically retract.
To prevent a technical fault, do not
hold the door locking pins firmly
when they are retracting.
If the door is opened during operation
all wash functions are automatically in-
terrupted.
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Risk of injury due to door open-
ing automatically.
The door may open automatically at
the end of a programme.
Keep the area around the door free
of obstructions.
Before using for the first time
22
Closing the door
Push the baskets right in.
Raise the door upwards until the
catch engages.
Risk of crushing due to the door
closing.
When closing the door, you are at
risk of shutting your fingers in it.
Do not put your hand inside the door
as it is closing.
Activating the safety lock
Use the safety lock to prevent children
opening the dishwasher door. The door
can then only be opened by using a lot
of force.
To lock the door, push the slide un-
derneath the door grip to the right.
To unlock the door, push the slide to
the left.
Before using for the first time
23
Basic settings
Switching on the dishwasher
Switch the dishwasher on with the
button.
The welcome screen will appear when
the dishwasher is switched on.
For further information about the dis-
play functionality, see the “Display
functions” section in the “Guide to the
appliance” chapter.
Setting the language
The display will then change automatic-
ally to the screen for setting the lan-
guage.
Select the language you want as well
as the country, if applicable, using
the buttons and confirm with OK.
For further information on setting the
language, see the “Language” section
in the “Settings” chapter.
A tick will appear next to the lan-
guage that has been set.
Setting the water hardness level
The display will change to the screen
for setting the water hardness.
- You should programme the dish-
washer to the correct water hardness
for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates
e.g. between 1.8 and 2.7mmol/l (10 -
15 °dH - German scale) always pro-
gramme the dishwasher to the higher
value (2.7mmol/l or 15 °dH in this ex-
ample).
In the event of a fault, it will help the
service technician if you know the hard-
ness of your local water supply.
Therefore, please enter the water hard-
ness:
____________°dH or mmol/l
The dishwasher is programmed at the
factory for a water hardness level of
2.5mmol/l (14°dH – German scale).
Set the water hardness level in your
area and confirm using OK.
See the “Settings” chapter, “Water
hardness” section for more informa-
tion.
Before using for the first time
24
Finally, prompts will appear in the dis-
play.
After confirming these prompts with
OK, the messages Refill salt and
Refill rinse aid may appear.
Add salt and rinse aid if necessary
(see “Before using for the first time –
Dishwasher salt” and “Rinse aid”).
Select OK to confirm the messages.
The programme selected will briefly ap-
pear in the display and the indicator
light for the programme selected will
come on.
Next, the estimated energy and water
consumption may be shown for the
chosen programme for several
seconds.
Then the display will show the estim-
ated running time for the programme
selected.
Before using for the first time
25
Dishwasher salt
In order to achieve good cleaning res-
ults, the dishwasher needs to operate
with soft water. Hard water results in
the build-up of calcium deposits on
crockery and on the wash cabinet walls.
Mains water with a water hardness level
higher than 0.9mmol/l (5°dH – German
scale) must be softened. This occurs
automatically in the integrated water
softener. The water softener is suitable
for a water hardness level of up to
12.6mmol/l (70°dH – German scale).
In order to maintain the functions of
the water softener, it must be reactiv-
ated regularly. Reactivation occurs
automatically every eleventh pro-
gramme sequence. At the start of the
next programme, an additional 4.4l of
water is required for this process. En-
ergy consumption increases by
0.015kWh and the programme is ex-
tended by approx. 3minutes.
The above only applies to the ECO
programme at a water hardness of
2.5mmol/l (14°dH – German scale).
For other programmes and water
hardness levels, the frequency of re-
activation will differ.
In order to be reactivated, the water
softener requires dishwasher salt.
Depending on the water hardness level
(<3.8mmol/l, or <21°dH – German
scale), dishwasher salt is not required if
combination detergents are being used
(see “Detergent – Powder detergent and
detergent tabs”).
If the water in your area is very soft
and constantly lower than 0.9mmol/l
(5°dH – German scale), you do not
need to add dishwasher salt. The salt
refill indicator will automatically switch
off after the water hardness has been
set accordingly (see “Settings – Water
hardness”).
Damage to the water softener
from detergent.
Detergent will damage the water
softener.
Do not fill the salt reservoir with
powder or liquid detergent.
Damage caused by using unsuit-
able salts.
Some types of salt may contain in-
soluble components which can
cause the water softener to malfunc-
tion.
Only use special coarse-grained
dishwasher salt or other pure kitchen
salt for reactivation.
If you only ever use combination de-
tergent products in your dishwasher,
you can turn off both refill reminders if
you wish (see “Settings – Refill re-
minders”).
Please make sure that if you stop us-
ing combination detergent products,
you refill the dishwasher salt and
rinse aid. Switch the refill reminders
back on if required.
Before using for the first time
26
Filling the salt reservoir
Before filling the salt reservoir for the
first time, you must fill it with approx.
1l of water to enable the salt to dis-
solve.
Once the dishwasher has been used,
there is always sufficient water in the
reservoir.
Remove the lower basket from the
wash cabinet and unscrew the salt
reservoir cap.
Risk of corrosion due to saline
solution.
Water or saline solution will run out
of the reservoir when the cap is
opened. Saline solution that runs out
can cause corrosion in the wash
cabinet and to the load items.
The salt reservoir should therefore
only be opened in order to replenish
the salt.
Fill the salt reservoir with approx. 1l
of water (first use only).
Place the funnel provided over the
salt reservoir and carefully fill with
dishwasher salt until the reservoir is
full. The salt reservoir holds up to
1kg of salt, depending on the type of
salt used.
Clean off salt residues from around
the salt reservoir opening. Next,
screw the salt reservoir cap on again
firmly.
Immediately after filling the salt reser-
voir and each time you remove the
salt container cap, run the
65°CQuickPowerWash pro-
gramme with the Express pro-
gramme option selected without any
load items in the dishwasher to dis-
solve and remove any traces of salt
from the wash cabinet.
Before using for the first time
27
Refilling the salt
When Refill salt appears in the dis-
play, wait until the end of the pro-
gramme and then refill the salt reser-
voir.
Confirm with OK.
The salt refill indicator will go out.
Risk of corrosion due to saline
solution.
Saline solution that runs out can
cause corrosion in the wash cabinet
and to the load items.
Each time you remove the salt reser-
voir cap, you must run the
65°CQuickPowerWash pro-
gramme with the Express pro-
gramme option selected without any
load items in the dishwasher. This
will dissolve and remove any traces
of salt from the wash cabinet.
After the salt reservoir has been filled,
the salt refill indicator may still appear in
the display if the salt concentration has
not yet reached the correct level. In this
case, confirm the message again with
OK.
The salt refill indicator will be switched
off if you have programmed the dish-
washer for a water hardness below
0.9mmol/l (5°dH – German scale).
Before using for the first time
28
Rinse aid
Rinse aid is necessary to ensure that
water does not cling and leave marks
on crockery during the drying phase,
and helps crockery dry faster after it
has been washed.
Rinse aid is poured into the container
and the amount set is dispensed auto-
matically.
Washing-up liquid or detergent
can cause damage.
Washing-up liquid and detergent can
damage the rinse aid container.
Only fill it with rinse aid formulated
for domestic dishwashers.
Alternatively, you could use liquid citric
acid at a concentration of up to 10%.
The resulting rinsing and drying quality
on the crockery will not, however, be as
good as when rinse aid is used.
Risk of acid damage.
The dishwasher can be damaged by
high concentrations of acid.
Under no circumstances should you
use citric acid with a higher acid
content.
If you only ever wish to use combina-
tion products in your dishwasher,
you do not need to add rinse aid.
However, for optimum rinsing and
drying results, use dishwasher deter-
gent and add dishwasher salt and
rinse aid separately.
If you only ever use combination de-
tergent products containing salt and
rinse aid in your dishwasher, you can
switch off both refill reminders if you
wish (see “Settings – Refill remind-
ers”).
Please make sure that if you stop us-
ing combination detergents, you refill
the dishwasher salt and rinse aid.
Switch the refill reminders back on if
required.
Before using for the first time
29
Adding rinse aid
Press the yellow button on the lid
of the rinse aid reservoir.
The lid will spring open.
Fill with rinse aid until the filling level
indicator (arrow) changes to a dark
colour while the door is horizontally
open.
The rinse aid reservoir holds approx-
imately 110ml.
Close the lid firmly until you hear it
click into place. Otherwise, water can
enter the rinse aid reservoir during a
programme.
Wipe up any spilled rinse aid. This
prevents excess foam developing
during the next programme.
You can adjust the rinse aid dosage
for the best wash result (see “Set-
tings” chapter, “Rinse aid” section).
Filling the rinse aid reservoir
When the refill reminder Refill rinse aid
appears in the display, the reservoir
contains sufficient rinse aid for 2 to 3
programmes only.
Refill with rinse aid in plenty of time.
Confirm with OK.
The rinse aid refill reminder will disap-
pear.
Settings
30
You can alter the dishwasher’s con-
trols to suit changing requirements by
adjusting the settings.
The settings can be altered at any
time.
Opening the settings menu
Switch the dishwasher on with the
button if it is switched off.
Use the programme selection but-
ton to select the Further pro-
grammes/settings option.
The first of the further programmes will
appear in the display.
Select the Settings menu option us-
ing the buttons and confirm with
OK.
The first option in the Settings menu will
appear in the display.
For further information about the dis-
play functionality, see the “Display
functions” section in the “Guide to the
appliance” chapter.
Changing settings
Use the buttons to select the
menu option you want to change and
confirm your selection with OK.
Sub-menu options that have already
been selected will have a tick be-
side them.
Use the buttons to select the
setting you want and confirm with
OK.
To exit a sub-menu again, use the
Backbutton.
The display will revert to the menu
above.
Closing the settings menu
Press the button.
The display will change to the menu.
Settings
31
Language
The display can be set to appear in one
of several different languages.
You can change the language used in
the display and also the country via the
Language sub-menu.
The flag after the wordLanguage
serves as a guide if a language that
you do not understand has been set.
In this case keep selecting the menu
option that has a flag after it until you
reach the Language sub-menu.
Water hardness
Your dishwasher is fitted with a water
softener.
- You should programme the dish-
washer to the correct water hardness
for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates
e.g. between 1.8 and 2.7mmol/l (10–
15°dH - German scale) always pro-
gramme the dishwasher to the higher
value (2.7mmol/l or 15°dH in this ex-
ample).
If the water hardness in your area is
available in a unit other than °dH, you
can convert the values as follows:
1°dH = 0.18mmol/l = 1.78°fH
Setting the water hardness level
Select the water hardness level in
your area and confirm using OK.
Settings
32
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6ml.
3ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the pro-
gramme.
If spots appear on crockery and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
- Decrease the rinse aid dosage.
Consumption (EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption be-
fore a programme, and the actual con-
sumption after the end of the pro-
gramme.
In this menu you can also call up the
total consumption of energy and water
for all the wash programmes you have
previously run on your dishwasher (see
“Caring for the environment” chapter,
“EcoFeedback consumption ”display
section).
Display Consumption
Select the Consumption displaymenu
option and confirm with OK.
Select the setting you want and con-
firm with OK.
Display Total consumption
Select the Total consumptionmenu op-
tion and confirm with OK.
You can display the values for Energy
and Water using the buttons.
You can also reset the values for the
total consumption to 0.
Select the Resetmenu option and
confirm with OK.
Select the Yesmenu option and con-
firm with OK.
Confirm the message with OK.
The values are now reset to 0.
Settings
33
Display brightness
You can set the display brightness to
one of seven different levels.
Refill reminders
If you only ever use combination deter-
gent products or automatic dispensing
using Miele PowerDisks (if available),
you can switch off the refill reminders
for dishwasher salt and rinse aid if you
wish.
Please make sure that if you stop us-
ing combination detergents, you refill
the dishwasher salt and rinse aid.
Switch the refill reminders back on.
AutoOpen
In some programmes the door automat-
ically opens slightly to assist the drying
process.
This function can be deactivated if you
wish.
Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate work-
tops when you open the door at the
end of the programme if the fan is no
longer running.
If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Extra clean
You can choose this function to in-
crease the cleaning performance of the
programmes.
If you activate this function, the pro-
gramme durations and the main wash
temperatures will increase. The water
and energy consumption may increase.
If this function is switched on, it will be
applied to all programmes until it is
switched off again.
Extra dry
You can select this function in order to
increase the programme drying per-
formance.
If you activate this function, the pro-
gramme durations and final rinse tem-
peratures will increase. The energy con-
sumption may increase.
If this function is switched on, it will be
applied to all programmes until it is
switched off again.
Settings
34
2nd interim rinse
You can choose this function to in-
crease the cleaning performance of the
programmes with a second interim
rinse.
When this function is activated, water
consumption may increase.
If this function is switched on, it will be
applied to all programmes until it is
switched off again (except for the ECO
programme).
Hygiene cycle
If you mainly use low temperature pro-
grammes (<50°C), there is a risk of
bacteria and unpleasant odours build-
ing up in the wash cabinet (see “Clean-
ing and care – Hygiene cycle”).
If this function is switched on, a mes-
sage will be displayed recommending
the use of a high temperature pro-
gramme after several low temperature
programmes have been run.
Software version
You can call up the electronic software
version of your dishwasher for technical
support purposes.
Showroom
For demonstration purposes only.
The dishwasher is equipped with a
demo mode for showroom use.
Factory default
You can reset all dishwasher settings to
the factory default settings.
Select Reset and confirm with OK.
Caring for the environment
35
Economical dishwashing
This dishwasher is exceptionally eco-
nomical in its use of water and electri-
city.
You can make the most of your appli-
ance by following these tips:
- Washing in a dishwasher generally
uses less water and energy than
washing by hand.
- There is no need to pre-wash items
under running water, and this unne-
cessarily increases water and energy
consumption.
- For the most economical dishwash-
ing, make full use of the basket capa-
city without overloading the dish-
washer. This results in the most eco-
nomical dishwashing in terms of en-
ergy and water consumption.
- Choose the programme to suit the
type of crockery being washed and
the degree of soiling (see “Pro-
gramme overview”).
- Select the ECOprogramme for en-
ergy-saving dishwashing. This pro-
gramme is the most efficient in terms
of its combined energy and water
consumption for cleaning crockery
with a normal level of soiling.
- Follow the detergent manufacturer’s
recommendations on detergent
dosage.
- When using powder or liquid deter-
gent, you can use
1
/
3
less detergent if
the baskets are only half full.
- You can connect the dishwasher to a
hot water supply. A hot water con-
nection is particularly suitable with
energy-saving water heating sources,
such as solar energy with a circula-
tion system.
If the water is heated by electricity,
we would recommend connection to
cold water.
Caring for the environment
36
EcoFeedback consumption in-
dicator
The Consumption function is used for
calling up information about the energy
and water consumption of your dish-
washer (see “Settings” chapter, “Con-
sumption” section).
The following information can be shown
on the display:
- An estimate of the consumption be-
fore the programme begins
- The actual consumption at the end of
the programme
- The total consumption of the dish-
washer
1. Consumption estimate
After a programme has been selected,
first the name of the programme and
after a few seconds the estimated en-
ergy consumption and water con-
sumption will appear in the display.
The estimated consumption will be
shown as a bar chart. The more bars
that are visible (), the higher the en-
ergy or water consumption.
The values are influenced by the pro-
gramme, any programme options selec-
ted, the ambient conditions and the size
of the load.
The display will change automatically
from showing the estimated consump-
tion to showing the time remaining.
The estimated consumption function is
activated as standard. This function can
be deactivated, if preferred (see “Set-
tings”, “Consumption” section).
2. Display consumption
At the end of the programme you can
call up the actual amount of energy and
water used by the programme that has
just been run.
Confirm the Consumption (OK)mes-
sage with OK.
Switching the dishwasher off at the
end of the programme will delete the
actual consumption values for the pro-
gramme that has just been run.
3. Total consumption
You can view the total consumption of
energy and water for all previously used
programmes of your dishwasher (see
“Settings” chapter, “Consumption” sec-
tion).
Loading the dishwasher
37
General information
Remove coarse food residues from
crockery.
There is no need to pre-wash items un-
der running water.
Damage can be caused by ash,
sand, wax, lubricating grease or
paint.
These substances will contaminate
the dishwasher and can then no
longer be removed.
Do not wash items soiled with these
substances in the dishwasher.
Crockery can be loaded anywhere in
the baskets, observing the following
notes:
- Do not place crockery and cutlery in-
side other items where they will cover
one another.
- Load the crockery so that water can
access all surfaces. This ensures that
they get properly cleaned.
- Make sure that all items are securely
positioned.
- Hollow items such as cups, glasses,
pots, etc. must be inverted in the
basket.
- Tall and narrow hollow items, such as
champagne glasses, should be
placed in the middle of the basket
rather than in the corners. This en-
sures the hollow items are more eas-
ily accessed by the water jets.
- Wide based items should ideally be
placed at an angle so that water can
run off them freely.
- The spray arms must not be blocked
by items which are too tall or hang
through the baskets. Test for free
movement by manually rotating the
spray arms.
- Make sure that small items cannot
fall through the holders in the bas-
kets.
Small items such as lids should
therefore be placed in the cutlery
tray.
Some foods may contain natural dyes,
e.g. carrots, tomatoes or ketchup.
These dyes can discolour plastic items
in the dishwasher if large quantities of
these foods are in contact with the
crockery inside the appliance. The sta-
bility of plastic items is not affected by
this discolouration.
Washing silverware can also cause
plastic items to discolour.
Loading the dishwasher
38
Items not suitable for dishwashers:
- Wooden cutlery and crockery or
items with wooden parts: these may
discolour and fade. The glue used in
these items is not dishwasher-proof
and wooden handles may come
loose after being washed in a dish-
washer.
- Craft items, antiques, valuable vases
and decorative glassware: such items
are not suitable for dishwashers.
- Plastic items that are not heat resist-
ant: the high temperatures in the
dishwasher may cause them to melt
or lose shape.
- Copper, brass, tin and aluminium
items: these may discolour or be-
come dull.
- Colours painted over a glaze: these
may fade after a number of washes.
- Delicate glassware and glassware
containing lead crystal: clouding may
occur over time.
Silver
Silver that has been in contact with
foods containing sulphur can discolour.
These include egg yolk, onions, mayon-
naise, mustard, pulses, fish, fish brine
and marinades.
Silverware previously cleaned with a
silver polish may still be damp or spot-
ted at the end of a programme, where
water has not run off smoothly.
Tip: Rub the silver dry with a cloth.
Damage due to caustic alkaline
detergents.
Aluminium parts (e.g. the grease fil-
ters of cooker hoods) can be dam-
aged by caustic alkaline detergents.
In extreme cases, there is a risk of an
explosive chemical reaction (such as
an explosive oxyhydrogen gas reac-
tion).
Aluminium components must not be
cleaned in the dishwasher with
caustic alkaline commercial or indus-
trial detergents.
Tip: When purchasing new crockery
and cutlery, make sure they are dish-
washer-proof if you want to wash them
in the dishwasher.
Glass care
- Clouding may occur on glasses after
frequent washing in the dishwasher.
When washing delicate glassware in
the dishwasher, ensure that only a
special glass care programme with
very low temperatures is selected
(see “Programme overview”). This will
reduce the risk of clouding.
- Purchase glassware that is dish-
washer-safe (e.g. Riedel glassware).
- Use detergents with glass protective
additives.
Loading the dishwasher
39
Upper basket
See the “Loading the dishwasher”
chapter, “Loading examples” section
for examples of how to load crockery
and cutlery.
Loading the upper basket
Damage due to leaking water.
If you run the dishwasher without the
upper basket, water can leak out of
the dishwasher.
Only run the dishwasher with the up-
per basket in place (except during
the programmeTall items, if available).
Use the upper basket for small, light-
weight and delicate items such as
cups, saucers, glasses, dessert
bowls etc.
Shallow pans or casserole dishes can
also be placed in the upper basket.
Long items such as soup ladles and
mixing spoons should be placed lying
down across the front of the upper
basket.
Loading the FlexCare cup rack
You can put cups, small bowls and flat
crockery on the FlexCare cup rack.
Glasses can be arranged along the cup
rack so they sit securely during the pro-
gramme.
The silicone elements in the cup rack
are specially designed to hold tall
glasses with long stems securely.
Lower the cup rack to do so.
Raise the cup rack upwards to make
room for tall items.
Loading the dishwasher
40
Adjusting the FlexCare cup rack
You can set the height and depth of the
cup rack at 2different levels so that it
can accommodate larger cups and so
that taller crockery can be placed un-
derneath it.
Pull the cup rack upwards and click it
into the desired position (see arrow).
Loading the dishwasher
41
Adjusting the upper basket
In order to gain more space for taller
pieces of crockery in the lower basket
or upper basket, the upper basket can
be adjusted on 3levels with 2cm
between each level.
The upper basket can also be set at an
angle so that water can run off freely
from recesses. Make sure, however,
that the basket can slide smoothly in
and out of the wash cabinet.
Pull out the upper basket.
To raise the upper basket:
Lift the basket up until it clicks into
place.
To lower the upper basket:
Pull upwards on the levers at either
side of the upper basket.
Adjust the basket to the desired
height and then push the levers se-
curely back down into position.
When adjusting the upper basket,
make sure that tall plates in the lower
basket do not block the middle spray
arm.
Loading the dishwasher
42
Lower basket
See the “Loading the dishwasher”
chapter, “Loading examples” section
for examples of how to load crockery
and cutlery.
Loading the lower basket
Place larger and heavier items such
as plates, serving platters, sauce-
pans, bowls etc., in the lower basket.
Glasses, cups and small plates and
saucers can also be placed in the
lower basket.
Lowering the spikes
The rows of spikes at the front are used
for washing plates, soup bowls, plat-
ters, dessert bowls and saucers.
Both rows of spikes can be lowered to
make more room for large items such
as pots, pans and serving dishes.
Press the yellow lever downwards ,
and then lower the rows of spikes .
Loading the FlexCare glass holder
The silicone elements in the glass
holder provide a stable and secure hold
for delicate stemware.
Stemware such as wine glasses,
champagne flutes and beer glasses
can be leaned against the glass rack
or suspended from it.
The glass rack can be raised to make
more room for tall items.
You can set the glass holder to two dif-
ferent heights.
Slide the glass holder to the desired
height until the catches click into
place at the top or the bottom.
Loading the dishwasher
43
Cutlery tray
See “Loading the dishwasher – Load-
ing examples” for examples of how to
load crockery and cutlery.
Arrange the cutlery in the cutlery tray
as shown.
Loading the cutlery tray
To make unloading easier, cutlery
should be grouped in zones, one for
knives, one for forks, one for spoons,
etc.
Spoon heads should be placed in con-
tact with at least one of the serrated re-
tainers on the base of the tray to ensure
that water runs off them freely.
If spoon handles do not fit between
the holders, then lay them the other
way round.
Arrange tall items (such as cake
servers) so that they do not block the
upper spray arm.
Loading the dishwasher
44
Loading examples
Dishwashers with cutlery tray
Upper basket
Lower basket
Loading the dishwasher
45
Cutlery tray
Heavily soiled crockery
Detergent
46
Active ingredients
Damage caused by using unsuit-
able detergents.
Detergents that are not suitable for
domestic dishwashers can cause
damage to the dishwasher or to the
load.
Only use detergents formulated for
domestic dishwashers.
Modern detergents contain various act-
ive ingredients, the most important of
which are:
- Water softening complexing agents
to prevent calcification.
- Alkalis to aid removal of dried-on
soiling.
- Enzymes to break down starch and
loosen protein.
- Oxygen-based bleaching agents to
remove coloured stains (e.g. tea, cof-
fee, tomato sauce).
Most dishwasher detergents are mildly
alkaline and contain enzymes and oxy-
gen-based bleaching agents.
There are different types of detergent:
- Powder and liquid gel detergents.
These detergents allow you to adjust
the amount dispensed according to
the size of the load and level of soil-
ing.
- Tab detergents. These are suitable for
most levels of soiling.
As well as the usual detergents, com-
bination products are also available.
These contain rinse aid and water
softener (dishwasher salt).
Only use these combination detergents
for the water hardness levels recom-
mended by the manufacturer on the
packaging.
The cleaning and drying performance of
these combination detergents can vary
greatly.
For optimum cleaning and drying res-
ults, use dishwasher detergent and
add salt and rinse aid separately.
Detergent
47
Risk of chemical burns from de-
tergent.
Dishwasher detergents can cause
burning on the skin and in the eyes,
nose, mouth and throat.
Avoid contact with detergents.
Do not inhale powder detergents. Do
not swallow dishwasher detergents.
Seek medical attention immediately if
detergent has been swallowed or in-
haled.
Keep children away from detergents.
Detergent residues could still be
present in the dishwasher. Keep chil-
dren away from the dishwasher when
the door is open. Do not fill the de-
tergent dispenser until just before
starting the programme and activate
the door safety lock (depending on
model).
Detergent dispensing
The detergent compartment holds a
maximum of 50ml.
There are marks in the detergent com-
partment to aid with dispensing: 20, 30,
max. When the door is opened to a ho-
rizontal position, they show the approx-
imate fill level in ml and the maximum
fill height.
Follow the detergent dosage recom-
mended by the manufacturer on the
packaging.
Unless directed otherwise, use one
detergent tab or add 20 to 30ml of
detergent to the detergent compart-
ment, depending on the degree of
soiling of the crockery.
Failure to dispense the recommended
amount of detergent may impair clean-
ing results.
Some tabs may not dissolve completely
when the programme QuickPowerWash
is used.
Detergent
48
Adding detergent
Press the yellow button on the lid
of the detergent compartment.
The lid will spring open.
The lid will also open at the end of a
programme sequence.
Add the detergent to the detergent
compartment.
Push the lid shut until you hear it click
into place.
The detergent must not cause the
detergent compartment lid to get
stuck. This can prevent the lid from
opening during the programme se-
quence.
Do not overfill the detergent com-
partment.
Ensure that the detergent packaging
is properly closed after use. This pre-
vents the detergent from getting
damp and clumping together.
You can also apply a small amount of
detergent to the inner panel of the
door in programmes that have a pre-
wash stage (see “Programme over-
view”).
Operation
49
Switching on the dishwasher
Make sure the spray arms can rotate
freely.
Close the door.
Open the stopcock, if it is closed.
Press the button.
The programme selected will briefly ap-
pear in the display and the indicator
light for the programme selected will
come on.
Next, the estimated energy and water
consumption may be shown for the
chosen programme for several
seconds.
Then the display will show the estim-
ated duration for the selected pro-
gramme.
The Start indicator light will flash.
Selecting a programme
Choose your programme according to
the type of crockery and the degree of
soiling.
The different programmes and their
uses are described under “Programme
overview”.
Use the programme selection but-
ton to select the programme you
want.
The indicator light for the programme
selected will come on.
Further programmes can be selected
under .
Use the programme selection but-
ton to select the option.
The first of the further programmes will
appear in the display.
Use the buttons to select the
programme you want from the dis-
play.
You can now select programme options
(see “Programme options”).
If any programme options are selected,
the appropriate indicator lights will also
light up.
Operation
50
Display programme duration
The estimated duration of the selected
programme appears on the display be-
fore the programme begins. During the
programme, the time left until the end of
the programme is displayed.
Symbols appear to indicate which stage
the programme is at:
Pre-wash/Soak
Main wash
Interim rinse
Final rinse
Drying
End
The displayed duration may vary with
the same programme. It is influenced
by, for example, the water temperature
at each inlet, the reactivation process of
the water softener, the detergent type,
and the amount of dishes and how
soiled they are.
When a programme is selected for the
first time, the display will show the aver-
age programme duration for a cold wa-
ter inlet.
The programme durations shown in the
“Programme overview” chapter refer to
standard test loads and temperatures.
Each time a programme is run, the con-
trol-display module calculates the pro-
gramme duration required according to
the temperature of the water taken into
the dishwasher and the size of the load.
Starting the programme
Press the Startbutton.
If necessary, confirm the previously
displayed message with OK.
The programme starts.
The Start indicator light will come on.
During the programme sequence, you
can use OK to display the name of the
programme that is currently running.
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Operation
51
End of programme
The programme has ended when the
display shows the messageFinished.
In some programmes, if the AutoOpen
function is activated, the door will auto-
matically open slightly (see “Settings”
chapter, “AutoOpen” section). This im-
proves the drying process.
If the Consumptionprogrammable func-
tion is switched on, you can now call up
the actual energy and water consump-
tion of the programme that has just fin-
ished (see “Caring for the environment”
chapter, “EcoFeedback consumption
indicator” section).
The drying fan may continue to run for
a few minutes at the end of the pro-
gramme.
Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate work-
tops when you open the door at the
end of the programme if the fan is no
longer running.
If you have deactivated the auto-
matic door opening function (see
“Settings” chapter, “AutoOpen” sec-
tion), but would still like to open the
door at the end of the programme,
then make sure that you open the
door fully.
Energy management
To save energy, the dishwasher will
switch off automatically 10minutes
after the last time a button is pressed or
after the end of a programme.
You can switch the dishwasher back on
again with the button.
The dishwasher will not switch itself
off whilst a programme is running or if
there is a fault.
Operation
52
Switching off the dishwasher
The dishwasher can be switched off
at any time using thebutton.
Confirm the query Switch off with OK.
Switching the dishwasher off during a
programme stops the programme.
You can also do this to stop an ongoing
timer.
If you have pressed the button, but
in fact do not wish to cancel the pro-
gramme, use the button to select
the Do not switch off option on the dis-
play and confirm with OK.
Risk of damage from leaking wa-
ter.
Overflowing water can cause dam-
age.
If the dishwasher is not going to be
used for a longer period of time, e.g.
whilst on holiday, the stopcock
should be closed as a precaution.
Unloading the crockery
Crockery tends to break and chip more
easily when it is hot. Allow the crockery
to cool until it is comfortable enough to
handle before unloading the dish-
washer.
If you open the door fully after switching
off, the crockery will cool much faster.
First unload the lower basket, then
the upper basket and finally the cut-
lery tray.
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the crockery in the lower
basket.
Operation
53
Interrupting a programme
A programme will be interrupted as
soon as the door is opened.
If the door is closed again, the pro-
gramme will continue from the point it
was at before the door was opened.
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Cancelling or changing a pro-
gramme
If a programme is cancelled, import-
ant programme stages may be
missed.
A programme should only be can-
celled in the first few minutes of the
programme sequence.
If a programme has already started and
you wish to cancel it, proceed as fol-
lows:
Switch the dishwasher off with the
button.
Confirm the query Switch off with OK.
If you would like to select another pro-
gramme:
Switch the dishwasher on again with
the button.
If you have dispensed detergent
manually, check whether the deter-
gent compartment is still closed.
If the lid is already open, fill it with de-
tergent again and close the lid.
Select the programme you want, and
then start it.
Options
54
Timer
You can set the start time of a pro-
gramme. The programme start time can
be delayed for between 30minutes and
24hours.
With start time delays between
30minutes and 3hours, the delay can
be set in 30minute stages. It is set in
hours for periods longer than this.
With manual detergent dispensing,
the detergent will clump together if
the detergent compartment is not dry
and this may mean it is not fully
rinsed out.
When using the timer function, make
sure that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth first, if necessary.
Do not use any liquid cleaning
agents. These can leak out.
Danger to health due to deter-
gent.
To prevent children coming into con-
tact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro-
gramme, i.e. before you activate the
timer. Use the safety lock to secure
the dishwasher door.
Activating the timer
Switch the dishwasher on with the
button.
The Start indicator light will flash.
Select the programme you want to
use.
Press theTimer button.
The most recently set “Start in” time will
be shown on the display. The Timer
indicator light will light up.
Set the required time after which the
programme should start automatically
using the buttons.
Pressing and holding buttons or
will automatically adjust the time.
Confirm with OK.
The Start indicator light will come on.
Options
55
After you have activated the timer, all
the displays will switch off after a few
minutes to save energy.
Press the button to switch the dis-
play back on again for a few minutes.
The time up until the programme starts
will show counting down in the display
in hours for durations above 10hours,
and in minutes for durations below this.
At the end of the delay period, the pro-
gramme selected begins automatically.
The time left will appear in the display
and theTimer indicator light will go
out.
Changing or deleting the timer time
You can change the time set for the
timer or delete it.
Press theTimer button.
Use the buttons to select the
Change or Delete function and confirm
with OK.
After confirming the Change function us-
ing OK, you can change the time set for
the timer.
After confirming the Delete function us-
ing OK, the running time of the selected
programme will appear in the display.
TheTimer indicator light goes out
and the Start indicator light begins
flashing.
You can now start a programme or
switch the dishwasher off.
Switching the dishwasher off while a
timer is running stops the timer.
Guide for selecting a programme
56
Pots, pans, everyday crockery
and cutlery
Standard dried-on normal
food deposits
Stubborn dried-on, burnt-on
food deposits containing
starch or protein
1
Water and
energy saving programme
Maximum
cleaning performance
Crockery Food deposits Programme
features
Temperature-sensitive dishes,
glasses and plastics
Mixed crockery
Lightly dried-on
normal food
deposits
All normal
food deposits
Lightly dried-on
normal food
deposits
Programme with glass care
Variable,
sensor-controlled programme
Short programme taking
less than an hour
No crockery
Residual salt after refilling
the salt container
Flushes out
salt residues
1
Food such as potatoes, pasta, rice or stews can leave starchy deposits.
Deposits containing protein can be left by food such as fried meat or fish.
Guide for selecting a programme
57
Gentle45°C
Auto 45–65°C
QuickPowerWash 65°C
ECO
Intensive 75°C
Programme
2
Consumption estimate
3
QuickPowerWash 65°C
+ Express
2
The programmes can be combined with the “Express” or “IntenseZone” programme options
(if available) (see “Programme options”).
You can also select the “Extra clean”, “Extra dry” and “Second interim rinse” function
(if available) (see “Settings”).
3
The estimated values may change due to the selected settings or programme options,
or the conditions in which the appliance is being used.
Programme duration 13 minutes,
no heating up,
solely for flushing out salt.
Energy consumption
Water consumption
Programme duration
Energy consumption
Water consumption
Programme duration
Energy consumption
Water consumption
Programme duration
Energy consumption
Water consumption
Programme duration
Energy consumption
Water consumption
Programme duration
Programme overview
58
Programme Programme sequence
Pre-wash Main wash Interim rinse Final rinse Drying/
AutoOpen
°C °C
ECO
1
- 44
46
/
Auto 45–65°C Variable programme sequence,
sensor-controlled adjustment according to load size and level of soiling
As
required
45–65
As
required
55–70
/
Intensive 75°C
75
55–70
/
QuickPowerWash
65°C
- 65
60
/
Gentle 45°C
45
55–70
/
PowerWash 60°C
60
55–70
/
ExtraQuiet 55°C
- 55
55–70
/
Maintenance wash
- 75
70
/
1
This programme is the most efficient in terms of its combined energy and water con-
sumption for cleaning normally soiled crockery.
Programme overview
59
Consumption
2
Electrical energy Water
Time
Cold water Hot water Litres Cold water Hot water
15°C 60°C 15°C 60°C
kWh kWh h:min h:min
0.55 0.31 7.9 3:30 3:20
0,60–1,10
3.4
0,40–0,65
3.4
6,0–14,0
3.4
1:58–3:40 1:55–3:30
1,10 0,75 12,0 3:02 2:56
0,85 0,55 10,0 0:58 0:58
0,80 0,40 12,0 2:29 2:19
0,90 0,50 12,0 2:27 2:19
0,85 0,55 8,5 3:59 3:55
1,45 0,95 16,0 2:57 2:46
2
Values for the ECO programme were calculated under standardised testing conditions.
Values for the remaining programmes were calculated under comparable testing condi-
tions.
In practice, the selected settings, programme options or operating conditions may result
in different values.
3
Minimum value: half load with light soiling
4
Maximum value: full load with heavy soiling
Programme overview
60
Further programmes
PowerWash60°C
Programme for cleaning a mixed load
with normal household food residues.
ExtraQuiet55°C
Very quiet programme with longer dura-
tion. This programme is suitable for a
mixed load with normal household food
residues that have dried on slightly.
Maintenance programme
The dishwasher wash cabinet is gener-
ally self-cleaning. However, if residues
or deposits occur, use the Mainten-
anceprogramme to clean it. The dish-
washer must not be loaded for this pro-
gramme. This programme is designed
for cleaning the wash cabinet using
care products (dishwasher cleaner/
dishwasher conditioner) (see “Optional
accessories” chapter, “Appliance care”
section). Follow the instructions on the
packaging. When using dishwasher
care products, detergent should not be
dispensed. For this reason, automatic
dispensing (if available) will be deactiv-
ated for this programme.
Programme options
61
Selecting programme options
You can use programme options to ad-
just the programmes.
To do this, you can select or deselect
the programme options before running
the programme.
Switch the dishwasher on with the
button.
The Start indicator light will flash.
Select a different programme as re-
quired.
Press the button for the programme
option you want.
The indicator light will come on for the
relevant button if the programme option
is available for the programme selected.
If the programme option is not compat-
ible with the selected programme, a
message to this effect will appear in the
display.
In this instance, confirm the message
with OK.
Press the Startbutton to start the
programme.
The selected programme option will re-
main active for that particular pro-
gramme until the setting is changed (ex-
cept for the ECOprogramme).
Express
The Express programme option re-
duces the programme duration.
In order to achieve optimum cleaning
results, the temperature, and therefore
the energy consumption, will increase
with this option.
The time by which the programme dura-
tion is shortened varies according to the
selected programme.
Selecting the Express programme
option may take precedence over other
selected options.
When used in combination with the
QuickPowerWash programme, the
Express programme option results
in a rinse designed solely for the pur-
pose of flushing out the chamber to
remove salt solution that leaked out
after refilling the salt reservoir.
IntenseZone
The IntenseZone programme option
increases cleaning performance in the
lower basket.
Energy consumption increases due to
the extended wash duration in the lower
basket and increased temperature.
Cleaning and care
62
Check the condition of your dish-
washer regularly (approx. every 4–6
months). In this way, faults and prob-
lems can be avoided.
Damage due to unsuitable clean-
ing agents.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or discol-
our the external surfaces.
Only use cleaning agents formulated
for use on the relevant surfaces.
Cleaning the wash cabinet
The wash cabinet is largely self-clean-
ing, provided that the correct amount of
detergent is always used.
The frequent use of low-temperature
wash programmes (<50°C) increases
the risk of contamination and odours in-
side the wash cabinet. Run the Intens-
ive 75°C programme once per month
to clean the wash cabinet and prevent
odours from developing.
However, if residues such as limescale
or grease have been deposited, use the
Maintenance programme to clean the
dishwasher (see “Programme overview
– Additional programmes”) with
dishwasher cleaner (see “Optional ac-
cessories – Appliance care”). Follow the
instructions on the product packaging.
Miele cleaning and care products are
available to order from the Miele Cus-
tomer Service Department or from the
Miele online shop.
Clean the filters in the wash cabinet
regularly.
Cleaning and care
63
Hygiene cycle
If you mainly use low temperature pro-
grammes, there is a risk of bacteria and
unpleasant odours building up in the
wash cabinet. If you repeatedly use low
temperature programmes, you should
regularly run a high temperature pro-
gramme. This is to prevent the build-up
of residues and odours.
You can activate or deactivate a Hy-
giene info message (see “Settings – Hy-
giene cycle”).
If you deactivate this message, run the
Intensive75°Cprogramme once per
month to clean the wash cabinet and
prevent odours from developing.
Cleaning the door and the door
seal
The door seal and the sides of the dish-
washer door cannot be reached and
cleaned by the spray arm jets. As a res-
ult, mould can develop here.
Wipe the door seals regularly with a
damp cloth to remove food deposits.
Wipe off any food or drink residues
that may have dripped onto the sides
of dishwasher door.
Cleaning the control panel
The control panel should only be
wiped with a damp cloth.
Cleaning and care
64
Cleaning the appliance front
Damage due to soiling.
Soiling that is left too long might be-
come impossible to remove and
could cause the external surfaces to
alter or discolour.
It is therefore best to remove any
soiling immediately.
Clean the appliance front with a clean
soft sponge and a solution of warm
water and washing-up liquid. After
cleaning, wipe the surfaces dry using
a soft cloth.
A clean, damp microfibre cloth
without detergent can also be used.
To avoid damaging the external sur-
faces, do not use the following:
- Detergents containing soda, ammo-
nia, acids or chlorides
- Detergents containing descaling
agents
- Abrasive detergents, e.g. scouring
powder, scouring liquid, or pumice
stones
- Detergents containing solvents
- Stainless steel cleaning agents
- Dishwasher cleaner
- Oven cleaner
- Glass cleaning agents
- Hard, abrasive brushes or sponges,
e.g. pot scourers, brushes or
sponges that have been previously
used with abrasive cleaning agents
- Eraser stain remover blocks
- Sharp metal scrapers
- Wire wool
- Steam cleaners
Cleaning and care
65
Cleaning the spray arms
Particles of food can get stuck in the
spray arm nozzles and bearings. The
spray arms should therefore be inspec-
ted regularly (approx. every 2–
4months).
Never run a wash programme
without using the spray arms.
Damage due to soiling entering
the circulation system.
Without filters, soiling can enter the
circulation system and cause a
blockage.
Do not run a wash programme
without the lower spray arm or
without the filters.
When cleaning the filters and spray
arms, make sure that coarse soiling
cannot get into the circulation sys-
tem.
Switch the dishwasher off.
Removing the cutlery tray (if present)
In order to be able to remove the upper
spray, you first have to remove the cut-
lery tray (if present).
Take out the cutlery tray.
Press the rail safety clips on both
sides of the cutlery tray together
and remove the safety clips.
Take out the cutlery tray completely.
Cleaning and care
66
Removing the top spray arm
Push the upper spray arm upwards
to engage the inner ratchet. Then un-
screw the spray arm by rotating the
screw thread anti-clockwise.
Removing the middle spray arm
Rotate the screw thread of the middle
spray arm clockwise and remove
the spray arm.
Removing the lower spray arm
Remove the lower basket.
Rotate the screw thread of the lower
spray arm anti-clockwise and pull
the spray arm upwards to remove.
Cleaning the spray arms
Use a pointed object to push food
particles into the spray arm nozzles.
Rinse the spray arm thoroughly under
running water.
Cleaning and care
67
Inserting the upper spray arm
Refit the upper spray arm and tighten
it by hand.
Inserting the middle spray arm
Replace the middle spray arm and
turn the screw thread anticlockwise
until it engages. Make sure that the
recesses in the lock line up.
Inserting the lower spray arm
Refit the lower spray arm and ensure
that the filter combination lies flat in
the base of the wash cabinet.
Rotate the screw thread of the lower
spray arm clockwise until the arrow in
the viewing window points to the lock
symbol.
Make sure the spray arms can rotate
freely.
Damage due to soiling entering
the circulation system.
The lower spray arm is used to se-
cure the filter combination. Without
filters, coarse soiling can enter the
circulation system and cause a
blockage.
Do not run a wash programme
without the lower spray arm or
without the filters.
Inserting the cutlery tray (if present)
Slide the cutlery tray back onto the
rails from the front.
Replace the safety clips in the rails on
both sides of the cutlery tray.
Cleaning and care
68
Checking the filters in the
wash cabinet
The filter combination in the base of the
wash cabinet retains coarse soiling
from the suds solution. This prevents
soiling getting into the circulation sys-
tem and re-entering the wash cabinet
through the spray arms.
Damage due to soiling entering
the circulation system.
Without filters, soiling can enter the
circulation system and cause a
blockage.
Do not run a wash programme
without the lower spray arm or
without the filters.
When cleaning the filters and spray
arms, make sure that coarse soiling
cannot get into the circulation sys-
tem.
The filters can become blocked by soil-
ing that collects over time. The level of
soiling and the time it takes before the
filters need cleaning will vary depending
on use.
The messageCheck filters will appear in
the display after every 50 programme
cycles.
Check the filter combination.
Clean it, if necessary.
Then confirm the message with OK.
Cleaning the filters
Switch the dishwasher off.
Remove the lower spray arm (see
“Cleaning and care” chapter, “Clean-
ing the spray arms” section).
Before removing the filter combina-
tion, remove any coarse soiling to
prevent it from entering the circulation
system.
Remove the filter combination.
Cleaning and care
69
In order to clean the inside of the fil-
ter, pull the microfilter on the plastic
ring downwards and away from the
filter combination.
Rinse all the parts under running wa-
ter.
If necessary, use a soft cleaning
brush to remove soiling.
Insert the microfilter back into the fil-
ter combination.
Refit the filter combination so that it
lies flat in the base of the wash cab-
inet.
Refit the lower spray arm to the filter
combination using the screw connec-
tion.
Rotate the screw connection clock-
wise until the arrow in the viewing
window points to the lock symbol.
Damage due to soiling entering
the circulation system.
The lower spray arm is used to se-
cure the filter combination. Without
filters, coarse soiling can enter the
circulation system and cause a
blockage.
Do not run a wash programme
without the lower spray arm or
without the filters.
Cleaning and care
70
Cleaning the water inlet filter
A filter is incorporated in the screw
thread to protect the water inlet valve. If
the filter is soiled, insufficient water
flows into the wash cabinet.
Risk of electric shock from mains
voltage.
The plastic housing of the water con-
nection contains an electrical valve.
The housing must not be dipped in
water.
Disconnect the dishwasher from the
mains.
To do this, turn off the dishwasher,
switch off at the socket and remove
the plug.
Close the stopcock.
Unscrew the water inlet valve.
Remove the seal from the screw
thread.
Using pointed pliers, take hold of the
plastic filter slat and remove the filter.
Rinse the filter under running water.
Reassemble in reverse order.
Screw the screw thread securely
back onto the stopcock. Slowly open
the stopcock. If water drips out,
tighten the screw thread.
Never forget to put the filter back in
place after cleaning.
Cleaning and care
71
Cleaning the drain pump
If water remains in the wash cabinet
after the end of a programme, the water
has not been pumped away. The drain
pump may be blocked by foreign ob-
jects. These are easy to remove.
Disconnect the dishwasher from the
mains.
To do this, turn off the dishwasher,
switch off at the socket and withdraw
the plug.
Take the filter combination out of the
wash cabinet (see “Cleaning and
care” chapter, “Cleaning the filters”).
Scoop the water out of the cabinet
using a suitable small container or
utensil.
Press the catch of the drain pump
cover inwards .
Tip the cover inwards until it is re-
leased .
Rinse the cover thoroughly under run-
ning water and remove all foreign ob-
jects.
Cleaning and care
72
The drain pump (see arrow) is under-
neath the cover.
Risk of injury from glass splin-
ters.
It is especially difficult to see glass
splinters in the drain pump.
Take care when cleaning the drain
pump.
Carefully remove all foreign objects
from the drain pump. Check the drain
pump impeller by manually turning it.
You will feel a little resistance when
you turn the impeller.
Refit the cover by placing it down
vertically from above.
Ensure that the catch engages cor-
rectly.
Damage due to incorrect clean-
ing.
The components are delicate and
can be damaged during cleaning.
Take care when cleaning the drain
pump.
Problem solving guide
73
Many malfunctions and faults that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to call
the Miele Customer Service Department.
Information to help you rectify faults yourself can be found at www.miele.com/ser-
vice.
The following tables are designed to help you to find the cause of a malfunction or
a fault and to resolve it.
This section only lists faults that you can remedy yourself. All other faults are
shown in Fault FXX.
Technical problems
Problem Cause and remedy
The display remains
dark and the Start in-
dicator light is not
flashing after the dish-
washer has been
switched on with the
button.
The dishwasher is not plugged in.
Insert the plug and switch on at the socket.
The mains fuse has tripped.
Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse
rating).
If the mains fuse trips again, contact the Miele
Customer Service Department.
The button does not
respond immediately or
only responds once it
has been pressed sev-
eral times.
Energy management: the door was opened or closed
shortly before the button was pressed. As a result,
the dishwasher was already switched on. The elec-
tronic module requires a few seconds to be ready for
operation.
Wait a few seconds after opening or closing the
door.
Then press the button.
The dishwasher stops
during a programme.
The mains fuse has tripped.
Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse
rating).
If the mains fuse trips again, contact Miele Ser-
vice.
Problem solving guide
74
Fault messages
Problem Cause and remedy
One of the following
faults appears in the
display:
Before rectifying the problem:
Switch the dishwasher off.
Fault FXX There may be a technical fault.
Switch the dishwasher back on after a few
seconds.
Restart the desired programme.
If the fault message appears again, there is a tech-
nical fault.
Switch the dishwasher off.
Close the stopcock.
Call Miele Service.
Waterproof The Waterproof system has reacted.
Switch the dishwasher off.
Close the stopcock.
Call Miele Service.
Fault F78 Circulation pump fault.
Switch the dishwasher off.
Switch the dishwasher back on.
Restart the desired programme.
If the fault message appears again, there is a tech-
nical fault.
Switch the dishwasher off.
Close the stopcock.
Call Miele Service.
Problem solving guide
75
Door release
Problem Cause and remedy
The following fault is in-
dicated via the display:
Before rectifying the problem:
Switch the dishwasher off.
Fault F33 The door does not open automatically.
There may be a technical fault.
Open the door manually (see “Before using for the
first time” chapter, “Opening the door” section)
and switch the dishwasher off and then back on
again.
If the same fault message appears again, call
Miele Service.
The door locking pins do not retract after the door is
opened.
There may be a technical fault.
Switch the dishwasher back on.
If the same fault message appears again, call
Miele Service.
Problem solving guide
76
Water inlet fault
Problem Cause and remedy
One of the following
messages appears in
the display:
Open stopcock The stopcock is closed.
Open the stopcock fully.
Water intake Before rectifying the problem:
Switch the dishwasher off.
The water inlet is restricted.
Open the stopcock fully and start the programme
again.
Clean the filter in the water inlet (see “Cleaning
and care” – Cleaning the filter in the water inlet”).
The water-connection pressure is lower than
50kPa.
Seek professional advice.
The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see “Installation – Water drainage”).
Problem solving guide
77
Water drainage fault
Problem Cause and remedy
The message
Drain appears in the
display.
Before rectifying the problem:
Switch the dishwasher off.
Water drainage fault.
There might be water in the wash cabinet.
Clean the filter combination (see “Cleaning and
care” chapter, “Cleaning the filters” section).
Clean the drain pump (see “Cleaning and care”
chapter, “Cleaning the drain pump” section).
Remove any kinks or loops in the drain hose.
Problem solving guide
78
General problems with the dishwasher
Problem Cause and remedy
The indicator lights and
the display are dark.
The dishwasher has switched off automatically to
save energy.
Switch the dishwasher on again with the button.
Detergent residue is left
in the detergent com-
partment at the end of a
programme.
The detergent compartment was still damp when de-
tergent was added.
Only add the detergent when the detergent com-
partment is dry.
The detergent compart-
ment lid cannot be
closed.
Residual detergent is blocking the catch.
Remove the residual detergent.
At the end of a pro-
gramme there is a film
of moisture on the in-
side of the door and
possibly on the interior
cabinet walls.
This is part of the normal function of the drying sys-
tem. The moisture will dissipate after a short while.
Water remains in the
wash cabinet at the end
of a programme.
Before rectifying the problem:
Switch the dishwasher off.
The filter combination in the wash cabinet is clogged.
Clean the filter combination (see “Cleaning and
care” chapter, “Cleaning the filters” section).
The drain pump is blocked.
Clean the drain pump (see “Cleaning and care”
chapter, “Cleaning the drain pump” section).
The drain hose is kinked.
Remove any kinks from the drain hose.
Build-up of odours in
the wash cabinet
The frequent use of low-temperature wash pro-
grammes (<50°C) increases the risk of contamina-
tion and odours inside the wash cabinet.
Regularly run a high-temperature programme. This
is to prevent the build-up of residues and odours.
Problem solving guide
79
Noises
Problem Cause and remedy
Knocking noise in the
wash cabinet
A spray arm is knocking against a wash item.
Carefully open the door and rearrange the wash
items that are obstructing the spray arm.
Rattling noise in the
wash cabinet
Wash items are insecure in the wash cabinet.
Carefully open the door and rearrange the wash
items so that they sit securely.
There is a foreign object (e.g. glass shard) in the drain
pump.
Remove the foreign object from the drain pump
(see “Cleaning and care” chapter, “Cleaning the
drain pump” section).
Knocking noise in the
water pipes
This may be caused by the on-site installation or the
cross-section of the piping.
However, this will not affect the functioning of the
dishwasher in any way. If in doubt, contact a suit-
ably qualified plumber.
Problem solving guide
80
Unsatisfactory washing result
Problem Cause and remedy
The crockery is not
clean.
The crockery was not loaded correctly.
See notes in the “Loading the dishwasher” for ex-
amples on how to load crockery and cutlery.
The programme was not powerful enough.
Select a more powerful programme (see “Pro-
gramme overview”).
Activate the Extra clean function (see “Settings –
Extra clean”).
Not enough detergent was dispensed during manual
detergent dispensing.
Use more detergent or change the detergent you
are using.
Items are blocking the path of the spray arms.
Carry out a rotation check and if needed rearrange
the items so that the spray arms can rotate freely.
The filter combination in the wash cabinet is not
clean or was incorrectly fitted.
This may have caused the spray arm jets to become
blocked.
Clean and/or fit the filter combination correctly.
Clean the spray arm jets if necessary (see “Clean-
ing and care – Cleaning the spray arms”).
There are smears on
glassware and cutlery.
There is a bluish sheen
on the surface of glass-
ware. The film can be
wiped off.
The rinse aid dosage is set too high.
Reduce the dosage (see “Settings” chapter, “Rinse
aid” section).
Problem solving guide
81
Problem Cause and remedy
The crockery is not dry
or cutlery and glasses
are flecked.
The rinse aid dosage is too low or the rinse aid con-
tainer is empty.
Replenish the rinse aid container, increase the
dosage or change the brand of rinse aid (see “Be-
fore using for the first time – Rinse aid”).
The crockery was taken out of the wash cabinet too
soon.
Leave the crockery in longer (see “Operation – Un-
loading the dishwasher”).
The duration of the drying phase for the selected pro-
gramme is not sufficient for the crockery (particularly
for plastic crockery).
Select the Extradry function (see “Settings – Ex-
tradry”).
You have used combination products that have insuf-
ficient drying performance.
Switch to another detergent, or replenish the rinse
aid (see “Before using for the first time – Rinse
aid”).
Glassware has a brown
or blue tinge. The film
cannot be wiped off.
Ingredients from the detergent have formed a de-
posit.
Switch to another detergent straight away.
Glassware is dull and
discoloured. The film
cannot be wiped off.
The glassware is not dishwasher-proof. The surface
has altered.
No remedy.
Purchase glassware that is dishwasher-proof.
Tea or lipstick stains
have not been com-
pletely removed.
The wash temperature of the selected programme
was too low.
Select a programme with a higher main wash tem-
perature.
The bleaching effect of the detergent used is too low.
Switch to another detergent.
Problem solving guide
82
Problem Cause and remedy
Plastic items are discol-
oured.
Natural dyes, e.g. from carrots, tomatoes or ketchup
may be the cause. The amount of detergent used or
its bleaching effect was not sufficient to deal with
natural dyes.
Use more detergent (see “Detergent”).
Parts that are already discoloured will not revert to
their original colour.
White residue is visible
on the crockery. Cloud-
ing has occurred on
glassware and cutlery.
The film can be wiped
off.
The rinse aid dosage is set too low.
Increase the dosage (see “Settings” chapter,
“Rinse aid” section).
There is no salt in the salt reservoir.
Fill the salt reservoir (see “Before using for the first
time”, “Dishwasher salt” section).
The salt reservoir cap has not been screwed on cor-
rectly.
Replace it, making sure that it screws back on cor-
rectly.
Unsuitable combination detergents were used.
Switch to another detergent. If using tabs or
powder detergent, do not choose combination
products and ensure you refill the dishwasher salt
and rinse aid.
The water softener is programmed to too low a water
hardness level.
Programme the water softener to a higher water
hardness level (see “Settings” chapter, “Water
hardness” section).
Problem solving guide
83
Problem Cause and remedy
There are rust stains on
cutlery.
The affected items are not corrosion-resistant.
No remedy.
Purchase cutlery that is dishwasher-safe.
A programme was not run after dishwasher salt was
added. Traces of salt have got into the normal wash
cycle.
Always run the 65°C QuickPowerWash pro-
gramme with the Express option selected and
without any load items in the dishwasher immedi-
ately after adding dishwasher salt.
The salt reservoir cap has not been screwed on cor-
rectly.
Replace the cap, making sure that it screws back
on correctly.
Service
84
Information to help you rectify faults
yourself and about Miele spare parts
can be found at www.miele.com/ser-
vice.
Contact in the event of a fault
In the event of any faults which you
cannot remedy yourself, please contact
your Miele dealer or the Miele Customer
Service Department.
You can book a Miele Customer Ser-
vice Department call-out online at
www.miele.com/service.
Contact information for the Miele Cus-
tomer Service Department can be
found at the end of this document.
Please quote the model identifier and
serial number of your appliance (Fabr./
SN/Nr.) when contacting the Miele Cus-
tomer Service Department. This inform-
ation can be found on the data plate.
Please note that telephone calls may be
monitored and recorded for training
purposes and that a call-out charge will
be applied to service visits where the
problem could have been resolved as
described in this booklet.
The data plate is located on the right
side of the door.
EPREL database
From 1 March 2021, information on en-
ergy labelling and ecodesign require-
ments will be available in the European
Product Database (EPREL). You can
find the product database at the follow-
ing link https://eprel.ec.europa.eu/. You
will be asked to enter the model identi-
fier.
The model identifier can be found on
the data plate.
X xxxx
Miele & Cie. KG, Carl-Miele-Straße 29
33332 Gütersloh, Germany
Made in xxxx
Mod:
Type:
XX/XXXXXXXXX
HGXX
M.No: XXXXXXXX
AC xxx V x Hz
xx A
x,x kW
Service
85
Warranty
For information on the appliance war-
ranty specific to your country please
contact Miele. See back cover for ad-
dress.
In the UK, your appliance warranty is
valid for 2 years from the date of pur-
chase. However, you must activate your
cover by calling 0330 160 6640 or re-
gistering online at www.miele.co.uk.
Note for test institutes
All relevant information for comparison
testing is provided in the “Comparison
tests” booklet.
You can download this booklet from the
Miele website. You will find the booklet
under “Downloads” on the page for the
relevant dishwasher model.
Optional accessories
86
Dishwasher detergent, rinse aid and
cleaning and care products are avail-
able for this dishwasher, as are optional
accessories.
All the products have been designed for
Miele appliances.
These and many other products can be
ordered from the Miele webshop, the
Miele Customer Service Department or
your Miele dealer.
Dishwasher detergent, rinse
aid and salt
When selecting your Miele dishwasher,
you opted for top quality and perform-
ance. To achieve optimum results all the
time, it is important to use the right
dishwasher products. Not all off-the-
shelf products deliver the same results
in all dishwashers.
For this reason Miele offers dishwasher
products specifically designed for Miele
appliances.
Detergent tabs
- Sparkling results even with stubborn
food deposits
- Combination product with other func-
tions such as rinse aid, dishwasher
salt and glass protection additives
- Phoshate free ‒ helps protect the en-
vironment
- No need to unwrap thanks to water-
soluble wrapping
Powder detergent
- With active oxygen for thorough
cleaning
- With enzymes that are effective even
at low temperatures
- With glass-protection formula against
corrosion
Rinse aid
- For sparkling glasses
- Helps crockery to dry
- With glass-protection formula against
corrosion
- Specially designed cap for precise,
easy dispensing
Dishwasher salt
- Prevents limescale on crockery and
in the appliance
- Extra coarse-grained
Optional accessories
87
Appliancecare
Miele cleaning and care products
provide optimum care for your Miele
dishwasher.
Dishwasher cleaner
- For use with the Maintenancepro-
gramme without detergent dispens-
ing
- Cleans the dishwasher effectively
and thoroughly
- Removes grease, bacteria, and asso-
ciated unpleasant odours
- Ensures excellent dishwashing res-
ults
Descaling agent
- Removes heavy limescale deposits
- Mild and gentle with natural citric
acid
Conditioner
- Removes odours, limescale and light
deposits
- Maintains the elasticity and leak
tightness of the seals
Freshener
- Neutralises unpleasant odours
- Fresh, pleasant fragrance of lime and
green tea
- Easy and convenient to attach to the
dishwasher basket
- Very economical; lasts for 60 wash
cycles
Installation
*INSTALLATION*
88
The Miele Waterproof system
Provided that your dishwasher has
been installed correctly, the Miele Wa-
terproof system will protect you from
water damage throughout its lifetime.
Water inlet
Health risk due to wash water.
Water in the dishwasher is not drink-
ing water.
Do not drink any water from the dish-
washer.
Health risk and risk of damage
due to contaminated incoming water.
The quality of the incoming water
must correspond to the drinking wa-
ter specification of the country in
which the dishwasher is being oper-
ated.
Connect the dishwasher to a drinking
water supply.
The dishwasher may be connected to
cold or hot water (up to max. 60°C)
supplies.
If energy-saving water heating sources
such as solar energy circulation sys-
tems are used, we recommend con-
necting to the hot water supply. This
saves both time and electrical energy
costs. Hot water is used in all pro-
grammes.
The SolarSaveprogramme (if available)
requires a hot water connection of
between a minimum of 45°C and a
maximum of 60°C (inlet temperature).
The higher the water intake temperat-
ure, the better the cleaning and drying
results.
The water inlet hose is approx. 1.5m
long. A 1.5m long, flexible metal exten-
sion hose (tested to
14,000kPa/140bar) is available as an
optional accessory from Miele specialist
dealers or the Miele Customer Service
Department.
A stopcock with a ¾"threaded union is
required for the connection. If a stop-
cock is not available, only a qualified in-
staller may connect the dishwasher to
the drinking water supply.
The water connection pressure must be
between 50 and 1000kPa. If the water
connection pressure is too high, a pres-
sure reducing valve must be fitted.
Installation
*INSTALLATION*
89
Risk of damage from leaking wa-
ter.
The connection point is subject to
mains water pressure. Water leaking
from it can cause damage.
You should therefore open the stop-
cock slowly and check for leaks.
Correct the position of the seal and
screw thread if appropriate.
Regulation in Germany
For the protection of drinking water, the
non-return valve supplied with the dish-
washer must be installed between the
stopcock and the water inlet hose.
Screw the non-return valve onto the
stopcock.
Screw the water inlet hose onto the
thread of the non-return valve.
Risk of damage due to excessive
pressure.
A brief increase in the water pressure
can damage components of the
dishwasher.
This dishwasher must only be oper-
ated when it is connected to a fully
vented plumbing system.
Risk of electric shock from mains
voltage.
There are electrical components in
the water inlet hose.
The inlet hose must not be shortened
or damaged in any way (see illustra-
tion).
Installation
*INSTALLATION*
90
Water drainage
The dishwasher’s drainage system is fit-
ted with a non-return valve, which pre-
vents dirty water from flowing back into
the appliance via the drain hose.
The dishwasher is supplied with ap-
prox.1.5m of flexible drain hose with
an internal diameter of 22mm.
The drain hose can be extended using a
connection piece to attach a further
length of hose. The drainage length
must not be longer than 4m and the
delivery head no higher than 1m.
If the hose is to be directly fitted to the
drainage outlet on site, use the hose
clip supplied (see installation plan).
The hose can be directed to the left or
the right of the appliance.
The on-site connector for the drain hose
can be adapted to different hose dia-
meters. If the connector extends too far
into the drain hose, it must be
shortened. Otherwise, the drain hose
can become blocked.
The drain hose must not be shortened.
Lay the drain hose so that it does not
kink and is not being subjected to
pressure or tension.
Risk of damage from leaking wa-
ter.
Leaking water can cause damage.
After commissioning, make sure that
the water is not leaking.
Installation
*INSTALLATION*
91
Venting the water drain
If the on-site drainage connection is
situated lower than the guide path for
the lower basket rollers in the open
door, the drainage system must be ven-
ted. Otherwise, a siphoning effect dur-
ing a programme can cause the appli-
ance to empty itself of water.
Open the dishwasher door fully.
Remove the lower basket.
Insert a screwdriver into the middle
opening of the vent valve in the left
wash cabinet wall.
Press the screwdriver further into the
opening and push it through the
membrane behind.
The vent opening for the water drain is
now open.
Installation
*INSTALLATION*
92
Electrical connection
The dishwasher is “connector-ready” as
standard for connection to an earthed
socket.
The socket must be easily accessible
after the dishwasher has been installed.
If that is not possible, ensure that a
suitable means of disconnection is
provided on the installation side for
each pole.
Risk of fire from overheating.
Connecting the dishwasher to a
multi-socket adapter or to an exten-
sion lead can overload the mains
connection cable.
For safety reasons, do not use an ex-
tension lead or multi-socket adapter.
The electrical installation must comply
with VDE0100 requirements.
For safety reasons, we recommend us-
ing a type residual current device
(RCD) in the assigned electrical installa-
tion for connecting the dishwasher.
If the mains connection cable is dam-
aged, it must only be replaced with a
specific mains connection cable of the
same type (available from the Miele
Customer Service Department). For
safety reasons, such replacement may
only be carried out by a qualified spe-
cialist or the Miele Customer Service
Department.
These operating instructions and the
data plate indicate the nominal power
consumption and the appropriate fuse
rating. Compare this information with
the data of the on-site electrical con-
nection.
If in any doubt, consult a qualified elec-
trician.
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not syn-
chronised with the mains power supply
(e.g. island networks, back-up systems)
is possible. A prerequisite for operation
is that the power supply system com-
plies with the specifications of
EN50160 or an equivalent standard.
The function and operation of the pro-
tective measures provided in the do-
mestic electrical installation and in this
Miele product must also be maintained
in isolated operation or in operation that
is not synchronised with the mains
power supply, or these measures must
be replaced by equivalent measures in
the installation. As described, for ex-
ample, in the current version of BS OH-
SAS 18001–2 ISO 45001.
Technical data
93
Technical data
Height of freestanding appliance 84.5cm (adjustable by +3.5cm)
Height of built-in appliance 80.5cm (adjustable by +6.5cm)
Height of building-in niche Min. 80.5cm (+6.5cm)
Width 44.8cm
Width of building-in niche 45cm
Depth of freestanding appliance 60cm
Depth of built-in appliance 57cm
Weight Max. 43kg
Voltage See data plate
Rated load See data plate
Fuse rating See data plate
Test certifications awarded See data plate
Water pressure 50–1000kPa
(0.5–10bar)
Hot water connection Up to max. 60°C
Delivery head Max. 1m
Drainage length Max. 4m
Mains cable Approx. 1.7m
Capacity 9 place settings
United Kingdom
Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW
Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: [email protected]
Australia
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
Level 4, 141 Camberwell Road
Hawthorn East, VIC 3123
Tel: 1300 464 353
Internet: www.miele.com.au
Miele Electrical Appliances Co., Ltd.
1-3 Floor, No. 82 Shi Men Yi Road
Jing' an District
200040 Shanghai, PRC
Tel: +86 21 6157 3500
Fax: +86 21 6157 3511
E-mail: [email protected],
Internet: www.miele.cn
China Mainland
Miele (Hong Kong) Ltd.
41/F - 4101, Manhattan Place
23 Wang Tai Road
Kowloon Bay, Hong Kong
Tel: (852) 2610 1025
Fax: (852) 3579 1404
Email:
Website: www.miele.hk
Hong Kong, China
Miele India Pvt. Ltd.
1st Floor, Copia Corporate Suites,
Commercial Plot 9,
Mathura Road, Jasola,
New Delhi - 110025
E-mail: customercare@miele.in
Website: www.miele.in
India
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus
Dublin 24
Tel: (01) 461 07 10
Fax: (01) 461 07 97
E-Mail: [email protected]
Internet: www.miele.ie
Ireland
Malaysia
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Sapura Kencana
Petroleum
Solaris Dutamas No. 1
Jalan Dutamas 1
50480 Kuala Lumpur, Malaysia
Phone: +603-6209-0288
Fax: +603-6205-3768
Miele New Zealand Limited
IRD 98 463 631
8 College Hill
Freemans Bay, Auckland 1011
New Zealand
Tel: 0800 464 353
Internet: www.miele.co.nz
New Zealand
Miele Pte. Ltd.
29 Media Circle
#11-04 ALICE@Mediapolis
Singapore 138565
Tel: +65 6735 1191
Fax: +65 6735 1161
E-Mail: [email protected]
Internet: www.miele.sg
Singapore
Miele (Pty) Ltd.
63 Peter Place, Bryanston 2194
P.O. Box 69434, Bryanston 2021
Tel: (011) 875 9000
Fax: (011) 875 9035
E-mail: [email protected]
Internet: www.miele.co.za
South Africa
Miele Appliances Ltd.
Showroom 1, Eiffel 1 Building
P.O. Box 114782 - Dubai
Tel. +971 4 3044 999
Fax. +971 4 3418 852
800-MIELE (64353)
E-Mail: [email protected]
Website: www.miele.ae
United Arab Emirates
Manufacturer:
Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany
Thailand
Miele Appliances Ltd.
BHIRAJ TOWER at EmQuartier
43rd Floor Unit 4301-4303
689 Sukhumvit Road
North Klongton Sub-District
Vadhana District
Bangkok 10110, Thailand
Sheikh Zayed Road, Umm Al Sheif
Kuwait
Miele Kuwait
Al Wazzan United Trading Co.
P. O. Box : 3379
Hawally, 32034 Kuwait
Tel.: 00965-22001010
Fax: 00965-24838292
E-mail: [email protected]
Website: www.alwazzanunited.com
M.-Nr. 12 211 800 / 00en-GB
G5740
