Loading ...
Loading ...
Loading ...
Gas pressure regulator
A pressure regulator that is convertible
from natural to LP gas (Propane) or vice
versa is included with the appliance.
The included regulator corresponds
with the gas type of the cooktop. Verify
before installing.
The adjusted pressure is:
natural gas - 5" w.c.
LP gas - 10" w.c.
a Cooktop
b ½" NPT
c Regulator
As shown in the above diagram, the
included regulator must be used when
connecting the
cooktop to your gas
supply. Make sure the regulator is
easily accessible for adjustment after
the appliance has been installed.
For convenience, an AGA or CGA
approved flexible stainless steel gas
hose (accordion type) may be used
between the gas connection and the
regulator. This will allow the appliance
to be lifted out of the countertop for
cleaning or servicing. Make sure that
any drawers, cabinet doors, etc., do not
rub on this gas hose.
Do not use any regulator unless it
has been supplied by ..... Doing
so
may cause a gas leak.
If there is any doubt concerning
installation contact the Technical
Service Department:
After connecting the appliance check
all fittings for gas leaks e.g. with
soapy water.
When installed properly, the flame will
be steady and quiet. It will also have a
sharp, blue inner core that will vary in
length proportional to the burner size.
Flame adjustment will not be
necessary.
Gas connection
28 di 31
ATTENTION
MAXIMUM GAS-SUPPLY
PRESSURE, ALL MODELS
½ psi
Loading ...
Loading ...
Loading ...