Instant Camera Printer
User Manual
2
CONTENT
SAFETY INFORMATION
Read Before Use
OVERVIEW
Supplied Items
Product Features
SETUP
Charging
Loading Paper
External Memory
OPERATION
Power ON/OFF
Taking and Printing a Photo
Viewnder
Sele Mirror
Shooting Modes
Filter and Border Buttons
Live View Shoot
LED INDICATOR
Troubleshooting
SPECIFICATIONS
INSTALLING APP
PAIRING MOBILE DEVICE &
INSTANT CAMERA PRINTER
Android and iOS Pairing
Android Pairing (with NFC)
USER INTERFACE
Home Screen
Main Menu
Printer Setting
Photo Album
Send a Photo to Mini Print App
Edit Photo
Using Tile Print
Using Collage Print
Pre-cut Sticker Print
Smartphone Camera
Print from IVY CLIQ+2 MicroSD Card
Print Quene
P. 3-4
P. 5
P. 6-9
P. 10-15
P. 16-18
P. 19
P. 20-21
P. 22-24
P. 25-38
3
READ BEFORE USE
SAFETY INFORMATION
WARNING
Used to indicate a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
• Keep away from children and infants. Improper use of this product may cause
suffocation or accident.
• Stop using the device immediately if it emits smoke or a strange smell, or otherwise
behaves abnormally.
• Do not look at the sun or bright lights through the viewnder or the lens. Blindness or
vision problems could result.
• Do not re the ash near the eyes. It may hurt the eyes.
• A strap wound around a child’s neck may result in asphyxiation. If your product
uses a power cord, mistakenly winding the cord around a child’s neck may result in
asphyxiation.
• Turn the device off in places where camera use is prohibited. The electromagnetic
waves emitted by the camera may interfere with the operation of electronic
instruments and other devices. Exercise adequate caution when using the product
in places where use of electronic devices is restricted, such as inside airplanes and
medical facilities.
Please read the following instructions and safety precautions before using the device.
For regulatory and additional safety information, refer to the Regulation and Warranty
Information sheet included in your package contents.
RMN: PP2002
Regulatory Model Identication Number is assigned for regulatory identication purpose.
4
CAUTION
Used to indicate the level of a hazard or damage which,
if product is handled erroneously, may result in injury or
property damage other than product faults.
• When operating in extreme weather, the device might not print. Let the printer
temperature adjust to the recommended operating temperature of 59º to 90ºF
(15º to 32ºC), before attempting to print again.
• When charging, please charge the device at the recommended temperature of
59º to 90ºF (15º to 32ºC).
• Use a soft dry cloth to clean the device. Do not clean with a damp cloth or volatile liquids
such as paint thinner.
• Keep the top cover closed to avoid dust and other particles from entering the inside of
the device.
• If the device is not functioning properly, please contact the dealer you purchased
this product from or Canon Service & Support at www.usa.canon.com/support
• Never expose the battery to high temperatures, direct heat, or dispose by incineration.
• Electromagnetic interference or electrostatic discharge may cause the device to
malfunction or the memory to be lost or altered. Should this occur, use a pin, or similar
item to press the [RESET] button at the bottom of the device.
5
SUPPLIED ITEMS
PRODUCT FEATURES
OVERVIEW
Instant Camera Printer Quick Start Guide
Regulation and
Warranty
Information sheet
CANON ZINK®
Photo Paper
(10 sheet)
USB Cable Wrist Strap
1
2
3
4
5
5
6
7
8
9
Camera Lens Viewnder
Sele Mirror Border Button
Ring Light (8 LEDs) Filter Button
Print Output Slot Speaker
Wristband Eyelet
Reset Button
* To reset the device, press with a pin
Status LED MicroSD Card Slot (up to 256GB)
Slide Switch Charging Status LED
Power Button Micro USB Port
Shutter Button Printer Cover
Flash
1
2
3
4
5
6
7
8
9
6
The device has a built-in battery. Please fully charge the device via the USB cable provided
before using.
Insert the smaller end of the supplied USB cable into the device and other end into a
chargeable USB adapter.
The charging LED light will turn red to indicate charging.
Once fully charged, the charging LED will turn green.
− Operating time may vary depending on the battery status, operational status
and environment conditions.
* Make sure to fully-charge your IVY CLIQ product(s) at least once every three (3) months.
If the product is not charged/used for an extended period of time, you may not be able to
charge the built-in battery and the product may no longer power on.
CHARGING
SETUP
Charging status LED
Charging: Red
Fully Charged: Green
ABOUT USB CABLE
HANDLE THE USB CABLE WITH CARE WHILE CHARGING
• Do not place any heavy objects on top of the cable.
• Do not place the USB cable near heat.
• Do not scratch, damage, twist or pull hard on the cable.
• Do not plug or unplug the cable with wet hands.
• Avoid too high/too low temperature or humid conditions.
• Please unplug the USB cable from power source after charging.
• Please use the supplied USB cable for charging.
NOTE
7
LOADING PAPER
1
Remove the cover by sliding it forward in the direction of the arrow.
2
Open a single pouch of photo paper (10 sheets + blue SMART SHEET®).
3
Place all 10 photo paper sheets and the one blue SMART SHEET® into the photo
paper compartment.
− Stack the photo paper on top of the blue SMART SHEET®, making sure the
barcode and the photo paper logos are facing down.
4
Place the top cover back onto the device. It should click into place when closed
properly.
− The blue SMART SHEET® will be sent through the device automatically before
the rst print.
EXTERNAL MEMORY
INSERT AND REMOVE THE MicroSD CARD
• Insert the MicroSD card into the slot at the bottom of the device. You will feel a
slight click when the card is fully inserted .
• Push on the top of the card to release it. Gently pull to fully remove the card from
the device.
• If there is an error reading /writing to the MicroSD card, the MicroSD Error LED
indication will be displayed. Remove the MicroSD card and restart the device.
• Connect the device to a computer with the USB cable provided. Double-click the
external drive image when it appears on the computer to view and save the photos.
An external MicroSD card (up to 256 GB) is needed for saving captured photos.
Only FAT16, FAT32 and exFAT format are supported.
PREPARING A MEMORY CARD
Use the following memory cards (sold separately)
• MicroSD memory cards
*1
• MicroSDHC memory cards *1 *2
• MicroSDXC memory cards *1 *2
*1
Cards conforming to SD standards. However, not all memory cards have been veried
to work with the camera.
*2
UHS-I memory cards are also supported.
8
MAINTAINING THE DEVICE
•
Use and keep the device in the recommended environment of 59º to 90º F (15º to 32º C)
and 40-55% relative humidity.
• Keep your device rmware up-to-date. Connect your device with the Canon Mini Print
App. "Firmware Upgrade" icon will be appeared on the menu bar if new rmware is
available.
− Make sure your mobile device has an internet connection before checking. If you need
to upgrade the rmware, your printer must be charged to 50% or higher.
• Make sure you’re using the latest Canon Mini Print app version. If your apps don’t
automatically update, go to app store and check if you need to update.
NOTE
9
WHEN USING PHOTO PAPER
• Only load 10 photo paper sheets and 1 blue SMART SHEET®. Do not load more as it can
result in paper jams or printing errors.
• For optimal print results, use photo paper for Canon Ivy.
− You may purchase additional photo papers within the Canon Mini Print App by
tapping "Buy Paper" in the main menu.
• If there is a paper jam, simply turn the printer OFF and ON to automatically clear the
paper jam. Don’t try to pull the paper out.
• While the device is printing, don’t pull or tug on the photo paper.
• Handle photo paper carefully to avoid damage or bending.
• Keep the photo paper clean when loading. If photo paper is dirty or damaged, it may
result in a paper jam or print error.
• Don’t open a new pouch of photo paper until you are ready to load it into your device.
• Don’t expose photo paper to direct sunlight or moisture.
• Don’t leave your photo paper in an area where the temperature or humidity is out of the
suggested conditions indicated on the pouch. It may reduce the quality of the printed
photo.
ABOUT THE BLUE SMART SHEET®
•
Each pouch of photo paper contains 10 sheets of photo paper and 1 blue SMART SHEET®
.
• Load the blue SMART SHEET® and photo paper from within the same pouch for optimal
print quality. Each blue SMART SHEET® is specically tuned for the pouch of paper it is
contained in.
• The blue SMART SHEET® will be sent through the device automatically before the
rst print to clean the printer and optimize print quality for that specic paper pouch
(10 sheets).
• Keep the blue SMART SHEET® and only discard after you have printed all 10 sheets
of photo paper in the pouch. If print quality is not as expected, you can reuse the blue
SMART SHEET® if the paper is still from the same pouch. Simply slide the blue SMART
SHEET® with its barcode-side down underneath the remaining photo paper.
• Using a blue SMART SHEET® from a different pouch may result in reduced print quality.
NOTE
10
OPERATIONS
POWER ON/OFF
VIEWFINDER
1
Press and hold the Power button until
the LED indicator light turns on.
2
When the LED indicator turns to a steady
white , the device is ready to Use.
3
Press and hold the Power button to
turn off the device.
AUTO POWER OFF
• When the device is idle for about 3 minutes (default), it will automatically power off.
User can resume the device by pressing the Power button again.
• User can change the time (3 minutes / 5 minutes / 10 minutes) in the APP.
Compose an image with the frame mark in the viewnder.
2 x 3
Outer Frame Mark
for normal shooting
at 3.3ft -
∞
1ft -
∞
TAKING AND PRINTING A PHOTO
1
Hold the device, conrm the desired composition
of the image.
2
Press the Shutter button to take a photo.
The camera will automatically trigger the ash if it
is necessary for the lighting conditions.
3
The photo will be printed out immediately after
taking the photo, if paper is inserted . The device
can hold up to around 10 images at a time to print,
it depends on MicroSD card* capacity.
* Print queue will be cleared once the device is powered off and cannot be resumed.
* If no MicroSD card is inserted, the device can hold up to 5 images at a time to print.
4
User can take photos with the device even with no paper if MicroSD card is inserted,
photos will be saved in MicroSD card.
1ft -
∞
2 x 3
Inner Frame Mark
for close up shooting
at 1ft -
∞
11
SELFIE MIRROR
SHOOTING MODES
Compose an image with the frame mark in the Sele Mirror.
1.6ft -
∞
2 x 3
Focusing distance
at 1.6ft
You can select the different camera modes by the
Slide Switch at the top of the device for different
scenarios.
Note: If you are about to take a sele, the ring
shape 8 LED Ring Light around the lens gives you
uniform illumination on your face. It reduces the
level of shadow and allows you to take beautiful
shots of your face as a whole, and create a uniform
brightness across the entire photo.
* Effective Ring Light Range: 30cm - 60cm
Mode Landscape Portrait Sele
Symbols
Metering
(Metering in case
Human Face)
Center Average
(Keep Center Average)
Center Average
(Face area weighted)
Center Average
(Face area weighted)
Focusing
(Focusing in case
Human Face
detectd)
Center (Keep Center)
Center (Focus to
human face)
Center (Focus to
human face)
Flash
Flash OFF &
Ring Light OFF
Flash AUTO &
Ring Light OFF
Flash ON &
Ring Light ON
FILTER
User can add either black and white or vivid lter to a photo by pressing button before
taking photo.
Without Filter Black & White Filter Vivid Filter
without Border without Border without Border
BORDER
• User can add border to a photo by pressing button before taking photo.
• User can customize border through Canon Mini Print App after connected the device with
compatible smartphone (white border is default).
Go to the Home Screen, press "Go wireless!" --> "Snap".
Press to edit border.
Select type of border you like and choose a color, then press to conrm.
12
FILTER AND BORDER BUTTONS
Easily add a lter or border to your photos right on
the camera.
1
2
3
13
SHOOT & PRINT
Press to capture a photo. And press to conrm to print.
LIVE VIEW SHOOT
User can remotely control the device through the App such as taking photos.
Go to the Home Screen to enter the Live View Page.
Selected mode
will be shown
Take a photo
Set lters
and borders
Zoom in or out
Live view image
Select timer
(default: OFF)
Change orientation
TIMER
Press to capture a photo instantly. Press and select 3 seconds/ 5 seconds/
10 seconds timer (default: OFF), press to begin the countdown.
• The LED light around the sele mirror will alert you if the timer is enabled.
ZOOM
Press to zoom in.
14
ORIENTATION
Press to switch between horizontal and vertical.
15
16
LED INDICATOR
Status Mode LED Status LED
Power On Press and hold Power button
Standby After the device is powered on
Power Off Press and hold Power button
Blue SMART
SHEET
® Error
When the device detects wrong
blue SMART SHEET® is inserted,
or other blue SMART SHEET®
error
Processing blue
SMART SHEET
®
When the device is loading blue
SMART SHEET®
No Paper and no
SD card inserted
When the device has on paper and
no SD card inserted, the device
will not allow for taking a photo.
Paper Jam/
Cover Open
When there is a paper jam or the
printer cover is opened
Get Ready for
Printing
Preparing for printing
Printing Photo
When the device is printing a
photo
MS Mode
(Mass Storage
Mode)
Device is connected to a
computer
MicroSD Card
Error
Cannot write data into MicroSD
Card
White
Off
Blue
White
Red
White
Yellow >Magenta>Cyan>White
(Looping)
Magenta
Magenta
White
Red
White
17
Status Mode LED Status LED
Temperature
Too High
When device temperature is too hot
Temperature
Too Low
When device temperature is too
cold
Printer Head
Cooling
Checking the printer head
temperature and letting it cool down
before printing
Low Battery
When battery level down to 20%
Firmware
Upgrading
When the device is updating
rmware
LED INDICATOR
Red (Until temperature
returns to normal)
Cyan
White>Red (Looping)
White
Cyan (Until temperature
returns to normal)
TROUBLESHOOTING
Status LED Indication Actions
MicroSD Card
Error
Magenta
• Check if the MicroSD card is inserted properly
• Check if the MicroSD card is full
• Check if the MicroSD card is corrupted
• Check if the MicroSD card is compatible
Paper Feeding
Failed
Red
• Open the paper compartment cover to check if
Canon ZINK® photo paper is inserted
Paper Jam
Red
• Power off and on the device, the photo paper
will be fed out automatically
Printer Cover
is not closed
properly
Red
• Close the printer cover properly
Connection
N/A
• Make sure the smartphone bluetooth
connection is properly set up
• Make sure selection of device on the App is
correct
• Make sure smartphone OS is compatible and
up to date
Remote Control
Failed
N/A
• Make sure the device is connected with the
App
• Make sure the App and rmware are up to
date
Customized
Sound Failed
N/A
• Make sure the device is connected with the
App
• Make sure the app and rmware are up to date
Device does
not Work
N/A
• Make sure the battery level is not too low.
If it is, recharge the device
18
19
SPECIFICATIONS
All specications are subject to change without notice
Printing Technology ZINK®
Printing Resolution 314 x 600 dpi (dots per inch)
Printing Speed
Approximately 50 secods - Motor starts and stops,
at room temperature 77 °F (25 °C)
Photo Aspect Ratio 2" x 3"
Compatible Paper
Canon Photo Paper : ZP-2030-20 (20 sheets)
ZP-2030-50 (50 sheets) /
2" x 3" / Peel-and-Stick Back
Paper Capacity Up to 10 sheets of photo paper + 1 blue SMART SHEET®
Photo Resolution 8MP
Focal Length 2.6mm
Aperture f 2.2
Focusing Range
1ft (30 cm) -
∞
Sensitivity Auto (ISO 100 - 1600)
Flash YES (Auto)
Flash Range 1.6ft (0.5m)- 3.2ft (1m)
Memory Card MicroSD Card, up to 256GB
Photo Format JPEG
Power Source Built-in Rechargeable Li-Polymer Battery 700mAh, 7.4V
Charging Speed Approximately 120 minutes (Full Charge)
Power Adapter Output Current : 1A (min) Voltage : 5V
Environment Parameters
- Recommended Printing Operating, Charging, and
Storage Temperature : 59º to 90º F (15º to 32º C)
- Recommended Printing Operating, Charging, and
Storage Humidity : 40-55% RH
- Operating Temperature : 41º to 104º F (5º to 40º C)
- Operating Humidity : < 70% RH
Automatically Power-Off 3 minutes / 5 minutes / 10 minutes (selectable in-app)
Dimension
4.8” (W) x 3.2” (H) x 0.9” (D) /
121mm (W) x 80.3mm (H) x 22.5mm (D)
Weight 6.6 oz / 188 g
Compatible OS (for computer)
Windows 7 / 8 / 8.1 / 10
Mac OSX 10.10-10.15
Connectivity Bluetooth 5.0
Compatible OS iOS 9.0 or above & Androld 4.4 or above
Mobile Application Canon Mini Print
Connection for Charging and
Data Transfer
USB 2.0 (Micro USB)
20
INSTALLING APP
OPTION ①
SEARCH FOR "CANON MINI PRINT" IN APP STORES
For Android™ - from Google Play™
For iOS® - from the App Store®
OPTION ③
GO TO HTTPS://APP.CANONMINIPRINT.COM/ WITH
YOUR DEVICE INTERNET BROWSER
21
OPTION ④
USING NFC - ANDROID ONLY
OPTION ②
USING QR CODE - SCAN THE QR CODE
ON THE "QUICK START GUIDE"
For Android For iOS
TAP IT
NFC
22
Android and iOS Pairing
PAIRING MOBILE DEVICE & INSTANT CAMERA PRINTER
Turn on the printer by pressing and holding the Power button until the status LED
light turns on.
Open mobile device "Settings" to enable Bluetooth and pair it with the printer.
Pair - Tap on the icon on the top right corner and choose your printer. The icon will
change to indicate battery level after connected.
23
Reconnect Printer - The printer will automatically reconnect to the app once paired
already. If the printer has not connect to the app, tap on the icon on the top right
corner and choose your printer on the list.
24
Android Pairing (with NFC)
On your mobile device, ensure that NFC and Bluetooth are enabled.
Open the Canon Mini Print app.
Place your mobile device on top of the printer.
Follow the onscreen instructions to complete the pairing and connection for the first
time. Or the printer will pair automatically with the mobile device.
NOTE
Printer Status Icon (shown in App)
About Pairing
• One printer can be paired with only one iOS/Android device.
• One iOS/Android device can be connected to multiple printers.
To pair an additional printer, go to home page and tap on the icon on the top right and
press " " to choose the printer.
• Search for and pair a printer named "Canon (xx:xx) Instant Camera".
Match the last 4 digits of the MACnumber (xx:xx) on the label inside the printer.
• Bluetooth searching and transferring may fail depending on the environment.
Check the Bluetooth setting on your mobile device and try again.
TAP IT
NFC
Printer not connected
MAC: xx:xx:xx:xx:xx:xx
Printer connected
(Battery status shown)
25
HOME SCREEN
USER INTERFACE
MAIN MENU
App experience, features, and available Online Albums may vary depending on your device and region.
* Internet Connection Required. Requires active social media or Cloud account(s) to use.
Smartphone Camera
Photo Album
Pre-cut Sticker
Main Menu
Collage
Online Albums* (Login / Logout)
Facebook
Instagram
Google Photos
Live View and
SD card to print
View in-app messages
Connected Printer - User can check the printer
information, customize the printer name, voice
and auto power off time at anytime.
Access paired printer information & settings
View Online User Manual & FAQ
Purchase photo paper from Online Store
Check App version, user Agreement and
Privacy Statement
Printer Status
Print Quene
PRINTER SETTING
When the printer is connected with a mobile device, user can customize the printer name,
voice and auto power off time.
Tap , select your device to customize the printer name, voice and auto power off time
through the App.
RENAME
User can customize the printer name as you wish.
26
VOICE
The user can customize the sound effects for "Power On", "Power Off", and "Shutter".
User can record 3 sound les for printer voice.
Tap on the desired sound le icon to apply the sound.
To start a recording, tap on the desired sound le icon .
Press for audio playback and the playback audio will be automatically selected.
AUTO POWER OFF
Tap to change the auto power off time.
Printer
Printer
27
28
PHOTO ALBUM
You can browse photos in the Photo Album, with filters by folders and search by date.
On the Home Screen, Tap to view the Photo Album.
Once you’ve selected a photo, you can Print, Edit, Share, or Save.
To print, tap .
You can also browse from online albums.
Search by Date
All Photos - Gallery
Filter by Folder
29
SEND A PHOTO TO MINI PRINT APP
SEND A PHOTO IN YOUR DEVICE’S PHOTO GALLERY OR CAMERA ROLL TO THE CANON MINI PRINT APP
For Android
Find a photo in your device Gallery and tap the share button.
Tap the Mini Print Icon to send the photo to the app so that you can edit and print.
For iOS
Find a photo in your device Gallery and tap the share button.
OPTION A - Tap "Open in Mini Print" to send the photo to the app editing screen where
you can edit and print.
OPTION B - Tap the "Print to Canon" to send the photo directly to the print queue.
Editing Screen
Print Queue
30
EDIT PHOTO
You can customize your image with edits like filters, stickers, text, and more.
Tap the icons on the bottom bar of your screen.
Customize as you wish.
Don’t forget to Save, Share, or Print your changes before you exit the screen.
Print
Tile Print
Share
Save
Print Quene
Text
Filters Draw
Adjust Frames
Stickers Rotate
Brightness
Contrast
Saturation
Color Balance
USING TILE PRINT
Use the Tile Print function to print a single photo onto multiple sheets to create a large
tiled photo.
When you're ready to print, tap on and tap the tiled choice of 2 x 2 or 3 x 3 prints.
(Lines will appear to show how your image will be split.)
Tap to print your tiles and then put them together to create a larger tiled print.
31
32
USING COLLAGE PRINT
Use the Collage function to print up to 6 photos on one 2x3 sheet.
Tap in Home Screen.
Tap on the photos to add into collage. Number of photos selected will be shown.
You can choose different template by pressing , or swapping right to left on the
image preview.
You can also enlarge the preview by swapping the album bar downwards.
Select the template you like and go into edit page by pressing .
No. of print
33
Edit and adjust the images in your collage as you'd like and then tap to print,
to share or to save.
Collage (Edit as whole image)
Collage (Edit specified image)
Text
Stickers
Draw
Border
Layout
Replace
Rotate
Duplicate
Adjust Filters
34
PRE-CUT STICKER PRINT
Use the Pre-cut sticker function to print up the photo/text on the circle sticker.
Tap in Home Screen.
Tap on the photos to add into the circle sticker.
Press to edit the pre-cut sticker.
35
Adjust the images in your sticker as you'd like and then tap to print,
to share or to save.
Pre-cut sticker
(Edit as whole image)
Pre-cut sticker
(Edit specified image)
Background
Text Stickers
Draw
Adjust
Filters
Text
Rotate
Replace
Duplicate
36
On the Home Screen, tap to take a photo with your smartphone camera.
(Optional, tap on the icons at the bottom to take a photo with effects.)
Once you’ve taken a photo, you can Print, Edit, Share, or Save.
To print, tap .
SMARTPHONE CAMERA
Back
Timer
Brightness bar
Front / Rear Camera
Flash
Adjust
Frames
On the Home Screen , tap "Go Wireless!", then tap "SD Card to print".
Tap on the photo you want to print, then press .
You can also delete the photo in microSD card by pressing the .
PRINT FROM IVY CLIQ+2 MicroSD CARD
37
Print Delete
38
To manage your print queue, tap .
In the Print queue page, you can
Tap to remove photo in print queue
To change the print order, tap and hold on a photo, and reposition its order.
Tap on the specified photo you would not want to print it at the moment, a pause
sign will be shown.
Tap to duplicate a photo
Note about Print Queue: Your image will be stored in the Print Queue if your printer is not
on and connected when you send a print.
To release the print, simply turn your printer on and reconnect, you will be asked if you want
to print the image in your queue.
NOTE
• The printed image may differ from the original image due to the "screen technology"
used to display color on mobile device is difference from the "print technology" used
to print color on paper. (Thermal transfer printing).
• Do not pull the paper out by force during printing or paper jam.
• Do not open the top cover during printing. It may affect print quality.
• If the printer is vibrated or shaken, photo print quality may be affected.
PRINT QUENE
If the device is not functioning properly, please contact the dealer you purchased this product from or Canon
Service & Support at www.usa.canon.com/support
FCC REGULATIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may be a registered
trademark, or trademark, in other countries. IVY is a trademark of Canon U.S.A., Inc. in the United States. SMART
SHEET, the ZINK Technology and ZINK Trademarks are owned by ZINK Holdings LLC. Used under license.
© CANON ELECTRONIC BUSINESS MACHINES (H.K.) CO., LTD. 2020 ZV-223-UEN-202001
