JBL SSW-1

Owners Manual Multilingual - Page 7

For SSW-1.

PDF File Manual, 65 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
7
English
TROUBLESHOOTING
Symptom Solution
If there is no sound from any of the speakers • Check that the receiver/amplifier is on and that a source is playing.
• Check all wires and connections between the receiver/amplifier and
the speakers. Make sure all wires are connected. Make sure none of
the speaker wires are frayed, cut, punctured or touching each other.
If there is low (or no) bass output • Make sure the connections to the speaker inputs have the correct
polarity (+ and –). If you are using two SSW-1 subwoofers, try
inverting the polarity on one subwoofer as described on page 5.
• Consider adding a separate power amplifier to drive the SSW-1
subwoofer.
• When using a power amplifier with your SSW-1 subwoofer, make
sure the subwoofer output of the receiver/processor has been
enabled. See your receiver/processor’s owner’s manual for further
information on correct speaker configuration.
If the system plays at low volumes but shuts
off as the volume is increased
• Check all wires and connections between the receiver/amplifier and
the speakers. Make sure all wires are connected. Make sure none of
the speaker wires are frayed, cut, punctured or touching each other.
• If more than one pair of main speakers are being used, check the
minimum-impedance requirements of your receiver/amplifier.
If you are hearing midrange frequencies (such
as vocals) through the subwoofer
• When using the Normal mode, adjust the crossover frequency on
your electronics to a lower frequency.
SPECIFICATIONS
Enclosure Type Bass reflex with dual front slipstream ports
Low Frequency Driver Size and Material Dual 15-inch forward-firing, Advanced Aluminum Matrix cones
Recommended Amp Type External, JBL Cinema MA4-D bridged, dual input
Recommended Amplifier Power
2500 WRMS per woofer (5000 WRMS total) with correct limiting/
compression
Amplifier Features DSP EQ
Impedance 8 Ohms per input
Loudspeaker Sensitivity 84 dB/W/m woofer, 90 dB/W/m system
Frequency Response 15 Hz-crossover (-6 dB)
Frequency Response, -3 dB 16.7 Hz – 400 Hz
Frequency Response, -6 dB 15 Hz – 400 Hz
Frequency Response, -10 dB 13.5 Hz – 400 Hz
Resonance 18 Hz
Input Type One set of gold-plated binding post input per woofer
Product Dimension with Grille 53.5" H x 24" W x 23" D (1359.5mm x 610.2mm x 584.5mm)
Product Weight 350.5 lb. (159 kg.)
Finishes Black Vinyl
Loading ...
Loading ...
Loading ...