Loading ...
Loading ...
Loading ...
Connectthe Tubing
to the Refri_rator
Turn the Water On at
the Shutoff Valve
Automatic Ice maker
Operation In,ruction Guide
Before making the connection to the refrigerator, _ _re the refrigerator
power cord is not plugged into the
wall outlet,
. if your refrigerator does not have a
water filter, we recommend
installing one. if your water supply
has sand or particles that couid clog
the screen of the refrigeratoCs
water valve. Install the filter in the
water line near the refrigerator.
Remove the plastic flexible c_
from the refrigerator connection.
1. Remove the plastic flexible cap
from the water valve.
Conne_on
(sleeve)
1/4"
_mpre_ion
Nut
1/4°
Tubing
2. Place the compression nut and
ferrule (sleeve)onto the end of the tubing as shown.
3. lnsert the end of the copper tubing into the connection as far _ possible. While
holding the tubing, tighten the fitting.
Tighten any _nne_ions that leak,
,, Rug In the Refrigerator
Arr_ge the coil of copper tubing behind the refrigeraor so it does not vibrate
against the back of the refriger_or or against the wall. Push the refrigerator
back to the wail.
- Sta_ the Icemaker
_t the icemaking stop switch to the ON position The icemaker will not begin
to operate until it re_hes its operating temperature of 15 • (-9 _). It will then
begin operation automatically if the icemaking stop switch is in the ON
position.
- The automatic icemaker makes 8 cubes at a time, 120/150 pieces per day.
But these quantities may vary according to circumstance, including ambient
temperature, door openings, freezer Io_.etc.
,, The Icemaker stops when the bin is full.
Loading ...
Loading ...
Loading ...