Loading ...
Loading ...
Loading ...
5
1b. Solid Brick and Concrete Mounting
Mark the
exact location of
mounting holes.
Screw the wall
plate onto the
wall.
Drill pilot holes.
WARNING
• When installing wall mounts on cinder block, verify the actual concrete thickness
is at least 1-3/8” (35mm) for using the concrete anchors. Do not drill into mortar
joints! Be sure to mount in a solid part of the block, generally 1” (25mm) minimum
from the side of the block. It is suggested an electric drill on a slow setting be used
to drill the hole instead of a hammer drill to avoid breaking out the back of the hole
when entering a void or cavity.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
1
2
Concrete Anchor
Washer
Anchor Bolt
60mm
(2.4”)
ø 10mm
(ø 0.39”)
16-11-186-933676-EN.indd 5 12/5/2016 11:06:52 AM
Loading ...
Loading ...
Loading ...