Loading ...
Loading ...
Loading ...
3.2 Installing II-Type Backup Camera
Step 1 Press the clips at the sides of enclosure and separate the enclosure from the
main body along the direction shown in Figure 1.
Figure 1 Separate Enclosure and Main Body
Step 2 Drill in vehicle rear and aim the holes in bracket with drill template, for
detailed steps, refer to step 1 to 3 of section 3.1.
Figure 2 Drill Holes
Step 3 To fix bracket on vehicle, thread one PA4*25 screw into each metal anchor
through bracket.
Figure 3 Thread Screws
9
Loading ...