Loading ...
Loading ...
Loading ...
- 3 -
1. Hold the tool handle and press [ Figure 1] .
2. Pull the cleaning spring out of the pantry. And insert it into the tube
until you feel resistance. Always keep a 20-30cm spring between the drain
drain clog remover and the pipe opening.
3. Turn the wrench to the upright position. Four.
4.The crank according to the clockwise direction and turn to clean the
spring.
5. After the blockage is cleared, the wrench is pulled back to the level and
pulled manually back to the storage room. Repeat this process until the
obstruction is removed.
Electric Drill Operation:
1. Connect the dredger and drill as shown in Figure 2.
2. Pull the cleaning spring out of the pantry. And insert it into the pipe
mouth.
3. Set the bit to a low torque setting to avoid injury.
4. Start the drill at a low speed and increase the rotation speed according to
the blocking type. Warning: keep both hands away from the handle when
using to remove the blockage and prevent the rotary bolt from loosening.
5.Manually pull the cleaning spring back into storage. Repeat this process
until the obstruction is removed.
Caution
Always tighten the anti-rotation bolt before turning the cleaning spring
manually or with an electric drill.
Always point the spring away from the body whilst loosening the anti-
rotation bolt.
When clearing blocked sinks, remove water filters and other objects.
Always wear gloves and eye protection when clearing drains.
We recommend that the cleaning spring is cleaned and left to dry before
Loading ...
Loading ...
Loading ...