Loading ...
Loading ...
Loading ...
ANCHEER
11
3. Install the front wheel
3.1
3.2
Using the tool to loosen the fixing rod of the front fork and remove it (this
accessory is to prevent the front fork from being deformed during delivery).
Remove the nuts and the safety washers from the hub of wheel. Set front wheel
into front fork. Make sure fork hanger hold onto wheel axle, and make sure the
rotor put into middle of two brake pads.
Remember to take out the protective gasket from the brake before installing the
front wheel.
Installation And Adjustment
3.3 Put the safety washer on each side, and tighten the nut on each side with the tool.
Loading ...
Loading ...
Loading ...