Loading ...
Loading ...
Loading ...
16 en | Description EVERSE 8
2022-10 | 02 | F.01U.401.530
User manual
Electro-Voice
3. Adjust the MASTERVOL knob to 0dB.
4. Push the input selection soft key for
INPUT1 or INPUT2 if using an XLR or TRS
cable, or push the input selection soft key
for INPUT3/4 if using 3.5mm mini jack.
Use the MASTERVOL knob to adjust gain
to MUTE.
INPUT3/4
INPUT1 INPUT2
5. Connect an audio source using an XLR or
TRS cable to INPUT1, INPUT2, or a
3.5mm mini jack to INPUT3/4. Ensure
audio source is MUTE or at a low level
before making connection. After connection
is made, increase the source's output to a
reasonable level.
6. Adjust the INPUT LEVEL until the signal
peaks are just below maximum level or the
required output is achieved. If CLIP is
indicated, turn the level down until the
CLIP indication disappears.
Press the input selection soft key again to
exit the channel menu.
INPUT3/4
INPUT1 INPUT2
7. Adjust the MASTER VOL knob until you get
the required output from the loudspeaker.
Loading ...
Loading ...
Loading ...