Loading ...
Loading ...
Loading ...
• Usethewireincludedinthekitorasmallpaper
cliptofreetheforeignmaterialscloggingor
restrictingthenozzle.
Insertwireintonozzleandturnbackandforthto
clearobstruction.
Removeadditionaldebrisbybackflushingwater
supplythroughnozzleextension.Backflush
between30to60seconds.Turnnozzleextension
tostreamsprayandmovenozzlefromlowtohigh
pressurewhileflushing.
• Reinstallnozzleintonozzleextension.DoNot
overtighten.
• Reconnectnozzleextensionextensiontospray
gun.
• Reconnectthewatersupply,turnONthewater,
andstarttheengine.
• Testthepressurewasherbyoperatingwithnozzle
inthehighandthelowpressurepositions.
O-Ring Maintenance
Through the normal operation of your pressure
washer, the o-rings keep the connections of the hoses
and gun tight and leak-free. They may become worn
or damaged with use. Provided with your pressure
washer is an O-ring Maintenance Kit containing
replacement o-rings, rubber washer and a garden
hose inlet screen.
Parts in the O-Ring Kit Include:
• 1 o-ring, red, (p/n B2726) for the end of the spray
gun connection between gun and nozzle extension.
• 1 o-ring, yellow, (p/n B2264) for the end of the
high pressure hose.
NOTE: The above two o-rings are close in size.
Please match carefully to assure proper o-ring usage.
• 1 o-ring, blue, (p/n B3065) for the inside of the
hose to gun quick connect.
1 rubber washer, (p/n B2385) for the inside of the
garden hose connector.
1 water inlet screen (p/n B2384) for the garden
hose connector.
To remove a worn or damaged O-Ring:
• Use a small flathead screwdriver to get underneath
the o-ring and pry it off.
ENGINE MAINTENANCE
Checking Oil Level
Oil level should be checked prior to each use or at
least every 5 hours of operation. Keep oil level
maintained.
Changing Oil
Change engine oil after the first 5 hours and every 50
hours thereafter. If you are using your pressure
washer under extremely dirty or dusty conditions, or in
extremely hot weather, change oil every 25 hours.
Change oil while engine is still warm from running, as
follows:
• Rotate fuel valve to the "OFF" position to reduce
the possibility of fuel leakage.
• Remove all gasoline from tank.
• Clean area around oil fill, remove oil dipstick and
wipe it clean.
• Insert and remove the dipstick without screwing it
into the filler neck.
13
Loading ...
Loading ...
Loading ...