SGWOGD27 User Manual

Loading ...

MAINTENANCE AND CARE

Cleaning Safely

• Turn off all controls and wait for appliance parts to cool before touching or cleaning them. Do not

touch the burners, the inner surface of the oven or surrounding areas until they have had

sufficient time to cool.

• Clean the appliance with caution. Use care to avoid steam burns if a wet sponge or cloth is used

to wipe spills on a hot surface. Some cleaners can produce noxious fumes if applied to a hot

surface.

Surface and Oven Cleaning

• This is easily done using a damp cloth and a non-abrasive detergent. Wipe using a soft dry cloth.

For stainless steel parts with stubborn stains, use only a plastic scrubbing pad or sponge with

vinegar and warm water.

• Because of the many new cleaning products introduced in the marketplace each year, it is not

possible to list all products that can be safely used to clean this appliance. Carefully read the

cleaner manufacturer’s instructions to be sure the cleaner can be safely used on this appliance.

To determine if a cleaning product is safe, test a small inconspicuous area using a very light

pressure to see if the surface is scratched or discolored. This is particularly important for

porcelain, enamel, and highly polished, shiny, painted or plastic surfaces.

Removing the Oven Door

1. Fully open the oven door.

2. Insert a metal Locking Pin (B) in the Locking Hole (A) on each of the hinges. (Fig. 07)

3. Grasp the door by the sides, toward the back. Raise the front of the door a few inches and make

sure the Locking Pin (B) is locked by the door hinge. This will prevent the hinge from snapping

closed when the door is removed. (There will be some spring resistance to overcome because of

the hinge being locked). When the front of the door is high enough and hinges are locked, you

will be able to lift the hinges to clear the slots.

4. Pull the hinges out of the slots in the oven front frame.

Replacing the Oven Door

NOTE: Never take out the Locking Pins while the door is off. Do not close the hinges without the

weight of the door. The powerful springs will snap the hinges closed with great force.

1. Grasp the sides of the door at the center. Insert the ends of the hinges and fix hinge slots in the

oven front frame.

2. With the door open all the way, pull out the two Locking Pins (B) from the hinge Locking Holes

(A).

3. Raise the oven door and make sure it fits evenly with the front sides.

CAUTION: Do not place excessive weight or stand on an open oven door. This could cause the

range to tip over, break the door, or injure the user. Also, do not attempt to open or close

door or operate oven until door is properly replaced.

Loading ...

Summit SGWOGD27 27" Wide Gas Wall Oven