Loading ...
Loading ...
Loading ...
6 7
BOB
Gear REVOLUTION FLEX 3.0 DUALLIE User Guide
Stroller Operation
Unfolding and Folding
Unfolding the Stroller
1. Lift Red Frame Release Handle
Keep tires on ground as stroller
swing arm begins to swing open.
NOTE: Stroller swing arm will
swing open and snap into an
open and locked position.
2. Rotate Handlebar
Lift handlebar up and back until
it snaps into locked and upright
position.
Rear Wheel Removal
1. Unlock Parking Brake
Prior to removing the rear wheels,
position the parking brake in the
unlocked position.
2. Remove Wheel
Raise the wheel a few inches o
the ground, pull the release lever,
and pull the wheel out of the rear
wheel attachment bracket.
Front Wheel Installation
1. Remove Through-Axle and Hex
Wrench From Storage Bag
Remove nut from through-axle.
Nut
Through-
Axle
Hex
Wrench
2. Rotate Front Fork Into Jog
Mode
Rotate the front fork until it locks
into jog mode. See page 9.
3. Insert Front Wheel
When facing the front of the
stroller, insert the wheel between
the fork and align the wheel hub
with the holes in the fork blades.
4. Insert Through-Axle
Insert the through-axle into the
fork and through the wheel hub,
then install the nut to the opposite
side.
5. Tighten Through-Axle
Hold the nut in place, and use
the hex wrench provided to fully
tighten the through-axle. Pull on
wheel to check that it is securely
installed and does not wobble.
Nut
Front Wheel Removal
1. Rotate Front Fork Into Jog
Mode
Rotate the front fork until it locks
into jog mode. See page 9.
2. Remove Through-Axle
Hold the nut in place and use
the hex wrench to loosen the
through-axle. Then remove the
through-axle from the front wheel
and fork.
3. Remove Front Wheel
Raise the front wheel a few inches
o the ground and pull wheel
down to remove.
Check the front wheel before
each use of the stroller to
ensure it is properly secured.
Failure to secure the front
wheel can cause the wheel to
vibrate, wobble, or become
detached from the stroller.
FALL HAZARD - Wheel can
detach and cause tip over. Pull
on the wheel to assure it is
securely attached.
IMPORTANT: Secure and safely
store all small parts.
Loading ...
Loading ...
Loading ...