Loading ...
Loading ...
Loading ...
8
• Determind the location to install the Hood.
• Use a stud finder to locate and mark 2 studs within
the installation area.
• Align and securely install the Brackets to the studs.
Use an extender for the Bracket if the Bracket
couldn't align with the stud.
The following steps require 2 or more people:
• Raise the Hood between the Brackets and align the
side holes with the ones on the Brackets. Use the
included screws to securely mount the Hood to the
Brackets. If the Brackets are installed horizontally,
drill new holes on the Hood Body instead.
• Install additional screws into the pre-drilled holes
on the backplate of the range hood to secure it to
the studs or lumbers. If the pre-drilled holes don't
align with the studs or lumbers, drill new holes on
the backplate instead.
2. Connecting the Vent System
• Use 6” round or 3-1/4 x 10” rectangular metal
duct (or semi-rigid aluminum duct, follow the local
building codes) to connect the exhaust on the Hood
to the duct-work above.
• Use aluminum foil tape or duct tape to seal all
connections.
3. Electrical Connection
WARNING: Electrical Shock Hazard. Disconnect power
before servicing.
• In case of a direct connection to the house wiring is
preferred, do the following:
• Disconnect the power.
• Cut off the plug from the power cord.
• Connect the wires from the power cord to the
wires from the house wiring using UL listed
wire connectors.
• Store the excess wires in the wiring box.
• Reconnect the power.
4. Installing the Baffle Filters
• Peel off the protective film from the baffle filters if
there's any.
• Align the baffle filter's bottom pins to the holes on
the hood. (Step 1)
• Pull and hold the latch. The top pins of the baffle
filter will retrack into the filter while the latch is
pulled. (Step 2)
• Keep pulling and holding the latch and push the top
end of the baffle filter upwards till it reaches the
hood.
• Release the latch to lock the baffle filter in place.
• Repeat these steps to install the rest of the baffle
filters.
Note
• Make sure all baffle filters are securely locked and
won't come off.
• These Baffle Filters collect the oil/grease while
you cook. There's no need to install other types of
filters.
• Clean the Baffle Filters every 2 to 3 months
regularly. Follow the cleaning guide in Page 10.
5. Completing the Installation
Turn power ON in the control panel. Check all lights and
fan operations.
INSTALLATION
Step 1: Align the pins.
Step 2: Pull and hold the latch.
Filter
Top
Filter
Bottom
Loading ...
Loading ...
Loading ...