Tripp Lite PDUMNH20AT1 Owner's Manual

Loading ...

PDUMH20ATNET

PDUMH15ATNET

PDUMH20AT

PDUMH15AT

PDUMNH20AT1

PDUMNH15AT1

3.2E

3. Installation (continued)

3.2E

Connect Equipment to PDU: Do not exceed the load rating of the PDU. The total

electrical current used by the PDU will be displayed on the digital meter in amperes. Each

outlet includes a green LED that will illuminate when the outlet is receiving AC power (this

feature only applies to models with switchable outlets).

3.3 Networking the PDU (Only Applicable to Models with SNMP Network Card Installed)

Note: The MAC address of the PDU (a 12-digit string in this format: 000667xxxxxx) is printed on a label

attached to the PDU enclosure. The MAC address is also printed on a label attached to the internal

network card.

If your network's DHCP server will assign a dynamic IP address to the PDU automatically, go

to Step

3.4A

. If you will assign a static IP address to the PDU manually, go to Step

3.5A

. If

you are uncertain which method to use, contact your network administrator for assistance

before continuing the installation process.

21-02-124 933E0A.indb 721-02-124 933E0A.indb 7 3/25/2021 2:19:08 PM3/25/2021 2:19:08 PM

Loading ...

Tripp Lite PDUMNH20AT1 1.92kW 120V Single-Phase ATS/Monitored PDU - 16 5-15/20R Outlets, Dual L5-20P/5-20P Inputs, 12 ft. Cords, 1U, TAA