Rising Loft
™
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS
Read before using!
• Read and follow all instructions and warnings before use. Save these instructions for future reference.
• Use this product only in the manner intended by the manufacturer. If you have questions, contact the
manufacturer.
• This product contains small items that could be a choking hazard if swallowed. Keep away from children.
• Make sure the desk or mounting surface can support the combined weight of the rail and its attachments with
accessories.
• Make sure the installation location is free of obstructions and will have plenty of clearance.
• Do not extend monitors behind the base.
• Never exceed the maximum load capacity stated for this product. Serious injury or property damage may
occur.
• Minimum load capacity must be reached for the monitor arms.
• Hand tighten screws only. Do not use power tools.
• When connecting and routing monitor cables and power cords, make sure the cables and cords are long
enough to accommodate the full range of motion.
• Do not touch the power cord with wet hands. It may result in electrical shock.
• Do not use if the power cord or plug is damaged.
• Do not connect this product to any electrical outlet that is damaged.
• Do not bend the power cord excessively or place heavy objects on top of it.
• Do not alter the length of the power cord.
• Do not use extension cords, adapters, or power strips with this product.
•
• This product is only compatible with Fellowes Rising accessories.
• This product is for indoor use only.
Rising Loft Components and tools
Please review these instructions before beginning the installation. Check that all the components needed for installation
were provided with your order. Contact your supplier if any parts are missing. Do not discard the packaging until the product
works to your satisfaction.
Components and tools
Optional accessories (sold separately)
slider mount
utility cup
rail adapter
shelf
laptop holder
Rising™ monitor arm
Rising Loft Installation
Step #1: attach clamp assembly to bracket on base.
If not using the standard attachment position, attach the clamp assembly to screws in the desired location.
• Slide the large portion of the keyhole over the screws, then pull the clamp assembly down so that the narrow portion can
be secured when tightening the screws.
•
•
1.89" - 3.23"
(48 - 82 mm)
Lower Attachment
Position (Optional)
Standard
Higher Attachment
Position (Optional)
0"- 1.10"
(0 - 28 mm)
1.06" - 2.21"
(27- 56.13 mm)
Rising Loft Installation
Step #2: prepare rail for base assembly
Place rail glass side down on table. Ensure to use a piece of corrugated paper or cloth as a barrier to protect the glass
surface.
•
option 1 option 2 option 3
Rising Loft Installation
Step #3: attach base to rail
•
• (Optional)
desired slots on the rail.
•
of use.
•
images below.
• Place covers over screws.
• Repeat for other base.
• (Optional)
installed in the center of the rail.
Step #4: attach rail assembly to worksurface
• Carefully rotate the assembly onto the edge of the desk.
• When in the desired position, push the clamp knob upwards until it touches the desk.
• Turn the knob until tight.
•
• Repeat steps with other clamp.
Please refer to the separate Power Module Manual for additional information
and optional installation instructions.
Rising Loft
Step #5: optional accessories: utility cup and shelf installation
• Hook the utility cup and or shelf onto the front edge of the rail, a magnet will hold securely in place.
Step #6: optional accessory: rail adapter installation
•
•
as needed.
• If a heavy monitor will be installed, the system will be most stable when closest to a base leg.
•
securely tightened.
• Place cover on the backside over the screws.
Rising Loft
Step #7: optional accessory: monitor arm installation to rail
The rail adapter feature allows you to simply push the posts on the components into the openings until they snap securely
into place.
•
into place.
• (see Step 11 for additional slider mount instructions).
•
release button and lift up the component.
• Set the range of arm rotation using the RotationStop™ feature.
CAUTION: Monitors must not be positioned behind the base.
Rising Loft
Step #7A: set range of motion for monitor arms
• Set the range of rotation using the RotationStop, which is located at the bottom of each individual monitor arm.
— The RotationStop consists of two rings. The rings rotate independently.
— Setpoints are indicated by the protrusions on each ring.
— Monitor arms will only be able to rotate between the points set by the top and bottom rings.
• Setpoints may be repositioned at any time by the user.
• For no restrictions on monitor arm rotation, align the setpoints on the top and bottom rings.
CAUTION: Monitors must not be positioned behind the base.
rotate top and bottom rings
to adjust range of motion
90º
example
90º
setpoints
180º
example
180º
setpoints
120º
example
120º
setpoints
360º
example
360º
setpoints aligned
rotate top and bottom rings
to adjust range of motion
90º
example
90º
setpoints
180º
example
180º
setpoints
120º
example
120º
setpoints
360º
example
360º
setpoints aligned
rotate top and bottom rings
to adjust range of motion
90º
example
90º
setpoints
180º
example
180º
setpoints
120º
example
120º
setpoints
360º
example
360º
setpoints aligned
Rising Loft
Step #8: optional accessory: attach VESA plate to monitor
•
•
— .
(
•
Attach monitor to VESA mount
•
—
press tab
to release
attach
VESA plate
lift off
VESA plate
M4x10 Phillips
3.9"
(100mm)
3"
(75mm)
push down until
VESA plate clicks
into place
Rising Loft
Step #9: optional accessory: monitor arm adjustments
The motion arm should raise and lower with moderate force, and then hold its position. To adjust for monitor weight:
•
•
—
—
counterclockwise.
Adjust monitor tilt tension, if necessary
The monitor should tilt with moderate force and hold its position.
To adjust monitor tilt tension:
•
— To increase the tension, tighten the screw by turning it clockwise.
— To reduce the tension, loosen the screw by turning it counterclockwise.
5mm
Allen key
rotate screw
to adjust tension
5mm Allen key
clockwise for
heavier weight
counterclockwise
for lighter weight
open
tension-adjustment
cover at lower end
of motion arm
Rising Loft
Step #10: optional accessory: slider mounts
•
• Slide the monitor along the slider bar.
—
adjustability range:
8.9" (226mm)
loosen knob screw
to adjust
Step #11: optional accessory: laptop holder installation
•
• Turn the pole fully to either the left or right until it stops.
•
•
•
º
range of motion is reached without hitting the glass.
•
•
• (Optional)
clockwise for heavier devices and counter clockwise for lighter devices.
Rising Loft Cable management
Cable management
There are multiple forms of cable management within the Rising Loft system which will vary depending on the accessories
used.
Interior Rail and Clamp Base
•
pressing down on the front side.
Top
Gather cables from the rear of rail and route down the rear of base clamp. Included base clamp cable cover attaches by
sliding down from the top until a click is heard.
• To remove, hold the rear of the cover and slide upward.
Rising Loft Cable management
Monitor arm
• Remove the cable cover from the arm.
— Slide the cover forward and pull downward.
•
• Slide the cover back onto the monitor arm with the cables captured.
IMPORTANT:
of the monitor arm.
Rising Loft Cable management
Laptop holder
•
•
•
•
IMPORTANT:
of the laptop holder.
© 2023 Fellowes, Inc. | Part #412868 Rev F
To contact a Fellowes
®
service representative, call 1-800-833-3746
Warranty information can be found by contacting customer service, your sales representative or by visiting www.fellowes.com
