Loading ...
Loading ...
Loading ...
MA I N TE N A NC E
CAUTION: NEVER PUT YOUR HAND INTO THE AREA HOUSING
WHILE THE FAN IS OPERATING.
FOR THE OPTIMAL LEVEL FO OPERATION, CLEAN THE RANGE
HOOD SURFACE, AN AND ALUMINUM FILTER REGULARLY.
1. Use only mild soap or detergent solutions to clean the range hood
surface. Dry surfaces using soft cloth.
2. Using a stainless steel cleaner to bring the
glow back into a stainless finish.
3. Clean the filter once a week or according to use
status. Press the buckle of the filter slightly,
take off the filter and put it into warm soapy
water using mild detergent, wipe the filter with
soft brush. Replace the filter after it’s dry.
4. Clean the motor fan and other inside parts once half year or according
to use status by QUALIFIED PERSON.
5. DO NOT clean motor with water or other liquid.
To replace Led light (Pic.1)
Сaution: LED light can not replace a new bulb, just replace a new
LED light assembly.
Make sure all the control switches are off, and the range hood is
unplugged! Please follow below instructions:
1. Take out the filters, and cut off the wire connection of the light.
2. Press the spring according to the arrow direction, then you can take
off the LED light.
3. You can replace a new LED assembly no more than rating.
4. Then put the light assembly to the hood in reverse direction. Connect
the wire of the lamp.
5. Fit on the filters.
TO R E P L A C E L I G H T
Loading ...
Loading ...
Loading ...