Loading ...
Loading ...
Loading ...
15
Lay the door in position
10 Before laying the door in position,
remove the lower hinge with pin
and washer and lay it aside. Screw
back the fixing bolts as they con-
tribute to the stability of the cabinet.
11 Lay the door in position and intro-
duce the control cable through the
slot in the new upper hinge, and
slide the door onto the hinge pin.
12 Connect the control cable to the
connector in the upper part of the
drying cabinet. The control cable
must be pulled through the hole as
illustrated.
13 Refit the protective cover over the
hinge and the roof of the drying
cabinet removed under point 1.
Lower
hinge
Screw back
the retaining
screws
The cabinet viewed from
below
New upper
hinge
The control
cable must
be pulled
through the
hole.
Loading ...
Loading ...
Loading ...