User instruction
Thank you for choosing this product. Please read
the user instruction carefully before use.
Power Button
Touch screen
Swipe up Swipe down
Swipe left Swipe right
3.Main function 4. Main menu
1.Message Notification 2. Quick settings
Set up your smart watch
1. Download the FitCloudPro app :
·Apple App Store for iPhones
·Google Play Store for Android phones
·Or scan the attached QR code below to download.
2. Install the app, and open it.
·If you already have a FitCloudPro account, log in
to your account.
·If you don't have a FitCloudPro account, tap “Join
Us” to create an account for a better user
experience.
3.Continue to follow the on-screen instructions to
connect the smart watch to your account.
Unbind or add device
Open the FitCloudPro app and tap “Device”>
“Unbinding Bracelet” or “Add Peripheral”
NOTE:
1. The app can only connect to one watch. To connect to
another watch, please unbind the connected watch first.
2. To successfully connect the watch and mobile phone,
you need to turn on the Bluetooth connection device of the
mobile phone.
3. If you use an Android phone, it needs to turn on the location
information function of the mobile phone system, otherwise,
the device may not be searched.
Waterproof rating:IP68
The watch is waterproof which you can wear it to
swin or do water activities.But it cannot be taken to
hot bath,diving.
Smartwatch firmware upgrade
The APP will prompt that there is a new watch
firmware version. You can enter the APP "Device"
interface to Upgrade it.
Smartwatch Upgrade notes:
1. The watch's battery should be above 60%
2. During the up grade process, the mobile phone interface will
show an upgrade progress bar, please do not do any operations.
Supplement: It is not recommended to wear it in a hot bath.
Water vapor produced when washing hot water.Its molecular
radius is small,and it is easy to seep into the gap of the watch
case. When the temperature drops,it will gradually condense
into water droplets,which will damage the circuit board of the
watch and damage the watch.
Go to the FitCloudPro app-->Device-->Push
Notifications-->Turn on the switch of the app you
need to receive notifications. Please don't forget
to allow thenotification permission of the phone.
Get Notifications
Open the FitCloudPro App--> Me --> Unit Prefer -->
Set units for length, weight or temperature
Switch Units
Please go to your APP-->Device-->Turn on the
switch of the Automatic Health Monitor and
Elevated Heart Rate Measurement
Auto Monitoring
Open the FitCloudPro App-->Device-->Watchface
(IOS) / DialLibrary (Android) -->Select the FIRST
picture to edit picture in your own gallery as the
watch face
Change Watch Face
Once the device is successfully connected to the
APP, the time and date will be synchronized with
your phone.
Set Time
Strap installation
Adjusting the pin
SMART SPORTS WATCH
Super long battery life
User instruction
Thank you for choosing this product. Please read
the user instruction carefully before use.
Power Button
Touch screen
Swipe up Swipe down
Swipe left Swipe right
3.Main function 4. Main menu
1.Message Notification 2. Quick settings
Set up your smart watch
1. Download the FitCloudPro app :
·Apple App Store for iPhones
·Google Play Store for Android phones
·Or scan the attached QR code below to download.
2. Install the app, and open it.
·If you already have a FitCloudPro account, log in
to your account.
·If you don't have a FitCloudPro account, tap “Join
Us” to create an account for a better user
experience.
3.Continue to follow the on-screen instructions to
connect the smart watch to your account.
Unbind or add device
Open the FitCloudPro app and tap “Device”>
“Unbinding Bracelet” or “Add Peripheral”
NOTE:
1. The app can only connect to one watch. To connect to
another watch, please unbind the connected watch first.
2. To successfully connect the watch and mobile phone,
you need to turn on the Bluetooth connection device of the
mobile phone.
3. If you use an Android phone, it needs to turn on the location
information function of the mobile phone system, otherwise,
the device may not be searched.
Waterproof rating:IP68
The watch is waterproof which you can wear it to
swin or do water activities.But it cannot be taken to
hot bath,diving.
Smartwatch firmware upgrade
The APP will prompt that there is a new watch
firmware version. You can enter the APP "Device"
interface to Upgrade it.
Smartwatch Upgrade notes:
1. The watch's battery should be above 60%
2. During the up grade process, the mobile phone interface will
show an upgrade progress bar, please do not do any operations.
Supplement: It is not recommended to wear it in a hot bath.
Water vapor produced when washing hot water.Its molecular
radius is small,and it is easy to seep into the gap of the watch
case. When the temperature drops,it will gradually condense
into water droplets,which will damage the circuit board of the
watch and damage the watch.
Go to the FitCloudPro app-->Device-->Push
Notifications-->Turn on the switch of the app you
need to receive notifications. Please don't forget
to allow thenotification permission of the phone.
Get Notifications
Open the FitCloudPro App--> Me --> Unit Prefer -->
Set units for length, weight or temperature
Switch Units
Please go to your APP-->Device-->Turn on the
switch of the Automatic Health Monitor and
Elevated Heart Rate Measurement
Auto Monitoring
Open the FitCloudPro App-->Device-->Watchface
(IOS) / DialLibrary (Android) -->Select the FIRST
picture to edit picture in your own gallery as the
watch face
Change Watch Face
Once the device is successfully connected to the
APP, the time and date will be synchronized with
your phone.
Set Time
Strap installation
Adjusting the pin
SMART SPORTS WATCH
Super long battery life
User instruction
Thank you for choosing this product. Please read
the user instruction carefully before use.
Power Button
Touch screen
Swipe up Swipe down
Swipe left Swipe right
3.Main function 4. Main menu
1.Message Notification 2. Quick settings
Set up your smart watch
1. Download the FitCloudPro app :
·Apple App Store for iPhones
·Google Play Store for Android phones
·Or scan the attached QR code below to download.
2. Install the app, and open it.
·If you already have a FitCloudPro account, log in
to your account.
·If you don't have a FitCloudPro account, tap “Join
Us” to create an account for a better user
experience.
3.Continue to follow the on-screen instructions to
connect the smart watch to your account.
Unbind or add device
Open the FitCloudPro app and tap “Device”>
“Unbinding Bracelet” or “Add Peripheral”
NOTE:
1. The app can only connect to one watch. To connect to
another watch, please unbind the connected watch first.
2. To successfully connect the watch and mobile phone,
you need to turn on the Bluetooth connection device of the
mobile phone.
3. If you use an Android phone, it needs to turn on the location
information function of the mobile phone system, otherwise,
the device may not be searched.
Waterproof rating:IP68
The watch is waterproof which you can wear it to
swin or do water activities.But it cannot be taken to
hot bath,diving.
Smartwatch firmware upgrade
The APP will prompt that there is a new watch
firmware version. You can enter the APP "Device"
interface to Upgrade it.
Smartwatch Upgrade notes:
1. The watch's battery should be above 60%
2. During the up grade process, the mobile phone interface will
show an upgrade progress bar, please do not do any operations.
Supplement: It is not recommended to wear it in a hot bath.
Water vapor produced when washing hot water.Its molecular
radius is small,and it is easy to seep into the gap of the watch
case. When the temperature drops,it will gradually condense
into water droplets,which will damage the circuit board of the
watch and damage the watch.
Go to the FitCloudPro app-->Device-->Push
Notifications-->Turn on the switch of the app you
need to receive notifications. Please don't forget
to allow thenotification permission of the phone.
Get Notifications
Open the FitCloudPro App--> Me --> Unit Prefer -->
Set units for length, weight or temperature
Switch Units
Please go to your APP-->Device-->Turn on the
switch of the Automatic Health Monitor and
Elevated Heart Rate Measurement
Auto Monitoring
Open the FitCloudPro App-->Device-->Watchface
(IOS) / DialLibrary (Android) -->Select the FIRST
picture to edit picture in your own gallery as the
watch face
Change Watch Face
Once the device is successfully connected to the
APP, the time and date will be synchronized with
your phone.
Set Time
Strap installation
Adjusting the pin
SMART SPORTS WATCH
Super long battery life
User instruction
Thank you for choosing this product. Please read
the user instruction carefully before use.
Power Button
Touch screen
Swipe up Swipe down
Swipe left Swipe right
3.Main function 4. Main menu
1.Message Notification 2. Quick settings
Set up your smart watch
1. Download the FitCloudPro app :
·Apple App Store for iPhones
·Google Play Store for Android phones
·Or scan the attached QR code below to download.
2. Install the app, and open it.
·If you already have a FitCloudPro account, log in
to your account.
·If you don't have a FitCloudPro account, tap “Join
Us” to create an account for a better user
experience.
3.Continue to follow the on-screen instructions to
connect the smart watch to your account.
Unbind or add device
Open the FitCloudPro app and tap “Device”>
“Unbinding Bracelet” or “Add Peripheral”
NOTE:
1. The app can only connect to one watch. To connect to
another watch, please unbind the connected watch first.
2. To successfully connect the watch and mobile phone,
you need to turn on the Bluetooth connection device of the
mobile phone.
3. If you use an Android phone, it needs to turn on the location
information function of the mobile phone system, otherwise,
the device may not be searched.
Waterproof rating:IP68
The watch is waterproof which you can wear it to
swin or do water activities.But it cannot be taken to
hot bath,diving.
Smartwatch firmware upgrade
The APP will prompt that there is a new watch
firmware version. You can enter the APP "Device"
interface to Upgrade it.
Smartwatch Upgrade notes:
1. The watch's battery should be above 60%
2. During the up grade process, the mobile phone interface will
show an upgrade progress bar, please do not do any operations.
Supplement: It is not recommended to wear it in a hot bath.
Water vapor produced when washing hot water.Its molecular
radius is small,and it is easy to seep into the gap of the watch
case. When the temperature drops,it will gradually condense
into water droplets,which will damage the circuit board of the
watch and damage the watch.
Go to the FitCloudPro app-->Device-->Push
Notifications-->Turn on the switch of the app you
need to receive notifications. Please don't forget
to allow thenotification permission of the phone.
Get Notifications
Open the FitCloudPro App--> Me --> Unit Prefer -->
Set units for length, weight or temperature
Switch Units
Please go to your APP-->Device-->Turn on the
switch of the Automatic Health Monitor and
Elevated Heart Rate Measurement
Auto Monitoring
Open the FitCloudPro App-->Device-->Watchface
(IOS) / DialLibrary (Android) -->Select the FIRST
picture to edit picture in your own gallery as the
watch face
Change Watch Face
Once the device is successfully connected to the
APP, the time and date will be synchronized with
your phone.
Set Time
Strap installation
Adjusting the pin
SMART SPORTS WATCH
Super long battery life
User instruction
Thank you for choosing this product. Please read
the user instruction carefully before use.
Power Button
Touch screen
Swipe up Swipe down
Swipe left Swipe right
3.Main function 4. Main menu
1.Message Notification 2. Quick settings
Set up your smart watch
1. Download the FitCloudPro app :
·Apple App Store for iPhones
·Google Play Store for Android phones
·Or scan the attached QR code below to download.
2. Install the app, and open it.
·If you already have a FitCloudPro account, log in
to your account.
·If you don't have a FitCloudPro account, tap “Join
Us” to create an account for a better user
experience.
3.Continue to follow the on-screen instructions to
connect the smart watch to your account.
Unbind or add device
Open the FitCloudPro app and tap “Device”>
“Unbinding Bracelet” or “Add Peripheral”
NOTE:
1. The app can only connect to one watch. To connect to
another watch, please unbind the connected watch first.
2. To successfully connect the watch and mobile phone,
you need to turn on the Bluetooth connection device of the
mobile phone.
3. If you use an Android phone, it needs to turn on the location
information function of the mobile phone system, otherwise,
the device may not be searched.
Waterproof rating:IP68
The watch is waterproof which you can wear it to
swin or do water activities.But it cannot be taken to
hot bath,diving.
Smartwatch firmware upgrade
The APP will prompt that there is a new watch
firmware version. You can enter the APP "Device"
interface to Upgrade it.
Smartwatch Upgrade notes:
1. The watch's battery should be above 60%
2. During the up grade process, the mobile phone interface will
show an upgrade progress bar, please do not do any operations.
Supplement: It is not recommended to wear it in a hot bath.
Water vapor produced when washing hot water.Its molecular
radius is small,and it is easy to seep into the gap of the watch
case. When the temperature drops,it will gradually condense
into water droplets,which will damage the circuit board of the
watch and damage the watch.
Go to the FitCloudPro app-->Device-->Push
Notifications-->Turn on the switch of the app you
need to receive notifications. Please don't forget
to allow thenotification permission of the phone.
Get Notifications
Open the FitCloudPro App--> Me --> Unit Prefer -->
Set units for length, weight or temperature
Switch Units
Please go to your APP-->Device-->Turn on the
switch of the Automatic Health Monitor and
Elevated Heart Rate Measurement
Auto Monitoring
Open the FitCloudPro App-->Device-->Watchface
(IOS) / DialLibrary (Android) -->Select the FIRST
picture to edit picture in your own gallery as the
watch face
Change Watch Face
Once the device is successfully connected to the
APP, the time and date will be synchronized with
your phone.
Set Time
Strap installation
Adjusting the pin
SMART SPORTS WATCH
Super long battery life
User instruction
Thank you for choosing this product. Please read
the user instruction carefully before use.
Power Button
Touch screen
Swipe up Swipe down
Swipe left Swipe right
3.Main function 4. Main menu
1.Message Notification 2. Quick settings
Set up your smart watch
1. Download the FitCloudPro app :
·Apple App Store for iPhones
·Google Play Store for Android phones
·Or scan the attached QR code below to download.
2. Install the app, and open it.
·If you already have a FitCloudPro account, log in
to your account.
·If you don't have a FitCloudPro account, tap “Join
Us” to create an account for a better user
experience.
3.Continue to follow the on-screen instructions to
connect the smart watch to your account.
Unbind or add device
Open the FitCloudPro app and tap “Device”>
“Unbinding Bracelet” or “Add Peripheral”
NOTE:
1. The app can only connect to one watch. To connect to
another watch, please unbind the connected watch first.
2. To successfully connect the watch and mobile phone,
you need to turn on the Bluetooth connection device of the
mobile phone.
3. If you use an Android phone, it needs to turn on the location
information function of the mobile phone system, otherwise,
the device may not be searched.
Waterproof rating:IP68
The watch is waterproof which you can wear it to
swin or do water activities.But it cannot be taken to
hot bath,diving.
Smartwatch firmware upgrade
The APP will prompt that there is a new watch
firmware version. You can enter the APP "Device"
interface to Upgrade it.
Smartwatch Upgrade notes:
1. The watch's battery should be above 60%
2. During the up grade process, the mobile phone interface will
show an upgrade progress bar, please do not do any operations.
Supplement: It is not recommended to wear it in a hot bath.
Water vapor produced when washing hot water.Its molecular
radius is small,and it is easy to seep into the gap of the watch
case. When the temperature drops,it will gradually condense
into water droplets,which will damage the circuit board of the
watch and damage the watch.
Go to the FitCloudPro app-->Device-->Push
Notifications-->Turn on the switch of the app you
need to receive notifications. Please don't forget
to allow thenotification permission of the phone.
Get Notifications
Open the FitCloudPro App--> Me --> Unit Prefer -->
Set units for length, weight or temperature
Switch Units
Please go to your APP-->Device-->Turn on the
switch of the Automatic Health Monitor and
Elevated Heart Rate Measurement
Auto Monitoring
Open the FitCloudPro App-->Device-->Watchface
(IOS) / DialLibrary (Android) -->Select the FIRST
picture to edit picture in your own gallery as the
watch face
Change Watch Face
Once the device is successfully connected to the
APP, the time and date will be synchronized with
your phone.
Set Time
Strap installation
Adjusting the pin
SMART SPORTS WATCH
Super long battery life
User instruction
Thank you for choosing this product. Please read
the user instruction carefully before use.
Power Button
Touch screen
Swipe up Swipe down
Swipe left Swipe right
3.Main function 4. Main menu
1.Message Notification 2. Quick settings
Set up your smart watch
1. Download the FitCloudPro app :
·Apple App Store for iPhones
·Google Play Store for Android phones
·Or scan the attached QR code below to download.
2. Install the app, and open it.
·If you already have a FitCloudPro account, log in
to your account.
·If you don't have a FitCloudPro account, tap “Join
Us” to create an account for a better user
experience.
3.Continue to follow the on-screen instructions to
connect the smart watch to your account.
Unbind or add device
Open the FitCloudPro app and tap “Device”>
“Unbinding Bracelet” or “Add Peripheral”
NOTE:
1. The app can only connect to one watch. To connect to
another watch, please unbind the connected watch first.
2. To successfully connect the watch and mobile phone,
you need to turn on the Bluetooth connection device of the
mobile phone.
3. If you use an Android phone, it needs to turn on the location
information function of the mobile phone system, otherwise,
the device may not be searched.
Waterproof rating:IP68
The watch is waterproof which you can wear it to
swin or do water activities.But it cannot be taken to
hot bath,diving.
Smartwatch firmware upgrade
The APP will prompt that there is a new watch
firmware version. You can enter the APP "Device"
interface to Upgrade it.
Smartwatch Upgrade notes:
1. The watch's battery should be above 60%
2. During the up grade process, the mobile phone interface will
show an upgrade progress bar, please do not do any operations.
Supplement: It is not recommended to wear it in a hot bath.
Water vapor produced when washing hot water.Its molecular
radius is small,and it is easy to seep into the gap of the watch
case. When the temperature drops,it will gradually condense
into water droplets,which will damage the circuit board of the
watch and damage the watch.
Go to the FitCloudPro app-->Device-->Push
Notifications-->Turn on the switch of the app you
need to receive notifications. Please don't forget
to allow thenotification permission of the phone.
Get Notifications
Open the FitCloudPro App--> Me --> Unit Prefer -->
Set units for length, weight or temperature
Switch Units
Please go to your APP-->Device-->Turn on the
switch of the Automatic Health Monitor and
Elevated Heart Rate Measurement
Auto Monitoring
Open the FitCloudPro App-->Device-->Watchface
(IOS) / DialLibrary (Android) -->Select the FIRST
picture to edit picture in your own gallery as the
watch face
Change Watch Face
Once the device is successfully connected to the
APP, the time and date will be synchronized with
your phone.
Set Time
Strap installation
Adjusting the pin
SMART SPORTS WATCH
Super long battery life
User instruction
Thank you for choosing this product. Please read
the user instruction carefully before use.
Power Button
Touch screen
Swipe up Swipe down
Swipe left Swipe right
3.Main function 4. Main menu
1.Message Notification 2. Quick settings
Set up your smart watch
1. Download the FitCloudPro app :
·Apple App Store for iPhones
·Google Play Store for Android phones
·Or scan the attached QR code below to download.
2. Install the app, and open it.
·If you already have a FitCloudPro account, log in
to your account.
·If you don't have a FitCloudPro account, tap “Join
Us” to create an account for a better user
experience.
3.Continue to follow the on-screen instructions to
connect the smart watch to your account.
Unbind or add device
Open the FitCloudPro app and tap “Device”>
“Unbinding Bracelet” or “Add Peripheral”
NOTE:
1. The app can only connect to one watch. To connect to
another watch, please unbind the connected watch first.
2. To successfully connect the watch and mobile phone,
you need to turn on the Bluetooth connection device of the
mobile phone.
3. If you use an Android phone, it needs to turn on the location
information function of the mobile phone system, otherwise,
the device may not be searched.
Waterproof rating:IP68
The watch is waterproof which you can wear it to
swin or do water activities.But it cannot be taken to
hot bath,diving.
Smartwatch firmware upgrade
The APP will prompt that there is a new watch
firmware version. You can enter the APP "Device"
interface to Upgrade it.
Smartwatch Upgrade notes:
1. The watch's battery should be above 60%
2. During the up grade process, the mobile phone interface will
show an upgrade progress bar, please do not do any operations.
Supplement: It is not recommended to wear it in a hot bath.
Water vapor produced when washing hot water.Its molecular
radius is small,and it is easy to seep into the gap of the watch
case. When the temperature drops,it will gradually condense
into water droplets,which will damage the circuit board of the
watch and damage the watch.
Go to the FitCloudPro app-->Device-->Push
Notifications-->Turn on the switch of the app you
need to receive notifications. Please don't forget
to allow thenotification permission of the phone.
Get Notifications
Open the FitCloudPro App--> Me --> Unit Prefer -->
Set units for length, weight or temperature
Switch Units
Please go to your APP-->Device-->Turn on the
switch of the Automatic Health Monitor and
Elevated Heart Rate Measurement
Auto Monitoring
Open the FitCloudPro App-->Device-->Watchface
(IOS) / DialLibrary (Android) -->Select the FIRST
picture to edit picture in your own gallery as the
watch face
Change Watch Face
Once the device is successfully connected to the
APP, the time and date will be synchronized with
your phone.
Set Time
Strap installation
Adjusting the pin
SMART SPORTS WATCH
Super long battery life
User instruction
Thank you for choosing this product. Please read
the user instruction carefully before use.
Power Button
Touch screen
Swipe up Swipe down
Swipe left Swipe right
3.Main function 4. Main menu
1.Message Notification 2. Quick settings
Set up your smart watch
1. Download the FitCloudPro app :
·Apple App Store for iPhones
·Google Play Store for Android phones
·Or scan the attached QR code below to download.
2. Install the app, and open it.
·If you already have a FitCloudPro account, log in
to your account.
·If you don't have a FitCloudPro account, tap “Join
Us” to create an account for a better user
experience.
3.Continue to follow the on-screen instructions to
connect the smart watch to your account.
Unbind or add device
Open the FitCloudPro app and tap “Device”>
“Unbinding Bracelet” or “Add Peripheral”
NOTE:
1. The app can only connect to one watch. To connect to
another watch, please unbind the connected watch first.
2. To successfully connect the watch and mobile phone,
you need to turn on the Bluetooth connection device of the
mobile phone.
3. If you use an Android phone, it needs to turn on the location
information function of the mobile phone system, otherwise,
the device may not be searched.
Waterproof rating:IP68
The watch is waterproof which you can wear it to
swin or do water activities.But it cannot be taken to
hot bath,diving.
Smartwatch firmware upgrade
The APP will prompt that there is a new watch
firmware version. You can enter the APP "Device"
interface to Upgrade it.
Smartwatch Upgrade notes:
1. The watch's battery should be above 60%
2. During the up grade process, the mobile phone interface will
show an upgrade progress bar, please do not do any operations.
Supplement: It is not recommended to wear it in a hot bath.
Water vapor produced when washing hot water.Its molecular
radius is small,and it is easy to seep into the gap of the watch
case. When the temperature drops,it will gradually condense
into water droplets,which will damage the circuit board of the
watch and damage the watch.
Go to the FitCloudPro app-->Device-->Push
Notifications-->Turn on the switch of the app you
need to receive notifications. Please don't forget
to allow thenotification permission of the phone.
Get Notifications
Open the FitCloudPro App--> Me --> Unit Prefer -->
Set units for length, weight or temperature
Switch Units
Please go to your APP-->Device-->Turn on the
switch of the Automatic Health Monitor and
Elevated Heart Rate Measurement
Auto Monitoring
Open the FitCloudPro App-->Device-->Watchface
(IOS) / DialLibrary (Android) -->Select the FIRST
picture to edit picture in your own gallery as the
watch face
Change Watch Face
Once the device is successfully connected to the
APP, the time and date will be synchronized with
your phone.
Set Time
Strap installation
Adjusting the pin
SMART SPORTS WATCH
Super long battery life
User instruction
Thank you for choosing this product. Please read
the user instruction carefully before use.
Power Button
Touch screen
Swipe up Swipe down
Swipe left Swipe right
3.Main function 4. Main menu
1.Message Notification 2. Quick settings
Set up your smart watch
1. Download the FitCloudPro app :
·Apple App Store for iPhones
·Google Play Store for Android phones
·Or scan the attached QR code below to download.
2. Install the app, and open it.
·If you already have a FitCloudPro account, log in
to your account.
·If you don't have a FitCloudPro account, tap “Join
Us” to create an account for a better user
experience.
3.Continue to follow the on-screen instructions to
connect the smart watch to your account.
Unbind or add device
Open the FitCloudPro app and tap “Device”>
“Unbinding Bracelet” or “Add Peripheral”
NOTE:
1. The app can only connect to one watch. To connect to
another watch, please unbind the connected watch first.
2. To successfully connect the watch and mobile phone,
you need to turn on the Bluetooth connection device of the
mobile phone.
3. If you use an Android phone, it needs to turn on the location
information function of the mobile phone system, otherwise,
the device may not be searched.
Waterproof rating:IP68
The watch is waterproof which you can wear it to
swin or do water activities.But it cannot be taken to
hot bath,diving.
Smartwatch firmware upgrade
The APP will prompt that there is a new watch
firmware version. You can enter the APP "Device"
interface to Upgrade it.
Smartwatch Upgrade notes:
1. The watch's battery should be above 60%
2. During the up grade process, the mobile phone interface will
show an upgrade progress bar, please do not do any operations.
Supplement: It is not recommended to wear it in a hot bath.
Water vapor produced when washing hot water.Its molecular
radius is small,and it is easy to seep into the gap of the watch
case. When the temperature drops,it will gradually condense
into water droplets,which will damage the circuit board of the
watch and damage the watch.
Go to the FitCloudPro app-->Device-->Push
Notifications-->Turn on the switch of the app you
need to receive notifications. Please don't forget
to allow thenotification permission of the phone.
Get Notifications
Open the FitCloudPro App--> Me --> Unit Prefer -->
Set units for length, weight or temperature
Switch Units
Please go to your APP-->Device-->Turn on the
switch of the Automatic Health Monitor and
Elevated Heart Rate Measurement
Auto Monitoring
Open the FitCloudPro App-->Device-->Watchface
(IOS) / DialLibrary (Android) -->Select the FIRST
picture to edit picture in your own gallery as the
watch face
Change Watch Face
Once the device is successfully connected to the
APP, the time and date will be synchronized with
your phone.
Set Time
Strap installation
Adjusting the pin
SMART SPORTS WATCH
Super long battery life
