Owner’s Manual
Installing Casters:
SR4POST Open Frame Rack
Caster Kit for Tripp Lite 4-Post
Open-Frame Rack Systems
Model: SRCASTER
The SRCASTER Kit consists of four (4) casters with required locknuts, washers and bolts for installation on Tripp Lite
4-Post Open Frame Rack Systems (Model SR4POST). The casters install to the base plates of the racks using the
pre-drilled holes as shown in the illustration below.
WARNING! Do not attempt to install casters with equipment mounted in the rack. Remove all
equipment from the rack before installing casters. Failure to heed this warning may result in damage
to rack and equipment or personal injury.
1111 West 35th Street • Chicago, IL 60609
www.tripplite.com/support
Tripp Lite follows a policy of continuous improvement. Product specications are subject to change without notice.
Copyright © 2009 Tripp Lite. All rights reserved.
93-2811 200912080
WARRANTY
REGISTRATION:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
Repeat for all four casters.
