Loading ...
Loading ...
Loading ...
Installation instructions
[] REMOVE THE FREEZER DOOR
%q_e the door shut with masking tape.
I).emoxe the hinge coxer on top of the fl'eezer door
(on some models).
Ilemo_e the two screws, then lift the hinge straight
ui ) to fl'ee the hinge, pin ti'om the socket in the top
of the doo_:
Remove the tape and tilt the door away fl'om the
cabinet, i,ifl it off the center hinge pin.
Set the door on a non-scratching surtace with
the inside up.
[] REMOVE THE
FRESH FOOD DOOR
Tape the door shut with masking tape.
tt
Remoxe the center hinoe_ pin with a ,/4 socket.
H" m,
inge_rln7
Remoxe the tape and tilt the door mva} fl'om the
cabinet, i,ifl the door straight off the bottom hinge
bracket,
Set the door on a non-scratching sm'face, with the
inside up.
CAUTION: Do not let door drop to the floor.
To do so could damage the door stop.
[] TRANSFER TOP HINGE
TO THE LEFT
Interchange hinge and screws at top fight with scre_vs
at the top left of cabinet. See top hinge illustration in
Step 1.
Do not tighten screws on hinge side at this time.
[] TRANSFER BOTTOM HINGE
BRACKET TO THE LEFT
Remo_ e the base ,grille by,,graslring, it at the bottom
and pulling it straight out.
Remoxe the insert at the top left side of the base grille
and install it on the fight side. You must pull up on
the insert to remoxe and snap down to replace.
Using a socket drixe_; moxe the bottom hinge bracket
ti'om the rioht side to the left side.
19
Loading ...
Loading ...
Loading ...