Loading ...
Loading ...
Loading ...
Upper Threading
24
c
Touch .
The screen changes, and all keys and operation
buttons are locked (except ).
d
Raise the presser foot lever to raise the presser foot.
e
Remove the spool cap and place the spool of thread
onto the spool pin.
Slide the spool onto the spool pin so that the thread
unwinds to the front from the bottom.
1 The thread unwinds to the front from the bottom.
f
Slide the spool cap onto the spool pin.
Slide the spool cap as far as possible to the right, as
shown, with the rounded side on the left.
g
While holding the pulled-out thread so that there is no
slack in it, pass the thread under the hook of the thread
guide, then under the thread guide cover and to the
front.
1 Thread guide
2 Thread guide cover
h
Pass the thread through the thread channel in the order
shown below.
CAUTION
• When threading the needle, be sure to touch
on the operation panel to lock all keys
and buttons, otherwise injuries may occur if
the “Start/Stop” button or any other button is
pressed and the machine starts.
Memo
• If the presser foot is not raised, the machine cannot
be threaded.
1
CAUTION
• Choose a spool cap that best fits the size of
spool being used. For more information
regarding the choice of spool caps for your
thread choice, refer to “Note” on page 20.
If the spool or the spool cap is not positioned
correctly, the thread may become tangled
around the spool pin or the needle may break
and cause injury.
a
b
Loading ...
Loading ...
Loading ...