Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/22160847-4326368/bg2d.png)
GB
- 45 -
Fault Possible cause Remedy
“Battery tempe-
rature outside the
normal range”
The robot lawn
mower returns to
the charging station
during the set work
time and/or the re-
chargeable battery
does not charge
up at the charging
station.
The temperature of the rechar-
geable battery is too high/low
or the controller is overheated
- If the battery temperature
exceeds 75°C, the robot
lawn mower will return to the
charging station (19).
- If the battery temperature ex-
ceeds 45°C or drops below
0°C, charging will be stopped
and the robot lawn mower
will wait at the charging stati-
on (19).
- Set the work time in summer to the early
hours of morning and avoid running the
robot lawn mower during the hours of the
day when it is hot.
- After the rechargeable battery or control-
ler has cooled down to the permissible
temperature range, the robot lawn mower
automatically returns to programmed ope-
ration.
“Motor overloaded”
The robot lawn mo-
wer has come to a
stop in tall and thick
grass.
- The robot lawn mower has
come to a stop because of
overcurrent in the motor or
because of a motor fault
Switch off the main switch (7) (OFF) and
then switch it back on (ON) again to restart
the robot lawn mower.
- Check the height of the grass in the
mowing area and, if necessary, mow the
grass to below 60 mm using a conventio-
nal lawn mower.
- Increase the cutting height. Always start
with a higher cutting height and reduce it
in small steps until you reach the desired
height.
- Inspect the blade plates (11) and wheels
for dirt and give these parts a thorough
clean.
- Check the rear wheels and the blade plate
(11) for blockages. If you are unable to
remove the blockages, contact the res-
ponsible customer service center.
“Robot lawn mower
is tilted”
The robot lawn
mower has toppled
over and come to
a stop.
- The robot lawn mower has
tilted
- The robot lawn mower has
been tilted for a prolonged
time in one direction
Press the “OK” button (54) to restart the ro-
bot lawn mower.
- Move the robot lawn mower to a level area
and restart it.
- If the robot lawn mower is tilted because
of a steep slope in the mowing area, ad-
just the perimeter wire (18) accordingly to
avoid severe inclines.
“Mower is stuck”
The robot lawn mo-
wer comes to a stop
on the way back to
the charging station.
- The movement of the robot
lawn mower is blocked by
an obstacle on the perimeter
wire (18)
Switch off the main switch (7) (OFF) and
place the robot lawn mower at a diff erent
point in the mowing area. Switch on the main
switch (7) again (ON) to restart the robot
lawn mower.
- Remove all obstacles on the perimeter
wire (18).
Anl_FREELEXO_LCD_BT_SPK9.indb 45Anl_FREELEXO_LCD_BT_SPK9.indb 45 12.10.2020 15:42:5512.10.2020 15:42:55
Loading ...
Loading ...
Loading ...