Loading ...
Loading ...
Loading ...
9
5. Enclosure Configuration
90°
2
2
Tilt the top of the panel away from the enclosure.
5.4.2 Reinstalling Side Panels
To Reinstall Side Panels, Reverse Steps 1-3
5.5 Combining (Baying) Enclosures
WARNING: Combining enclosures is not a substitute for stabilizing the enclosures. Each enclosure in a bay of combined enclosures requires
the same stabilizing measures as a standalone enclosure.
3
3
Lift the panel away from the brace that supports it.
2
1
A
B
1
Arrange the enclosures in the correct position for baying.
2
Each enclosure includes 4 baying brackets
A
that correspond to baying connection points
B
on the adjoining enclosure. The baying connection points already contain screws. Remove the
screw from each baying connection point in the adjoining enclosure.
3
3
Loosen the screw in each baying bracket and turn each bracket 90 degrees toward the
adjoining enclosure, aligning each bracket with the corresponding baying connection point on
the adjoining enclosure.
Loading ...
Loading ...
Loading ...