Loading ...
Loading ...
Loading ...
7
NOTE: Only non-combustible materials can be used in close proximity to this appliance.
Any gas burning appliance requires adequate clearance and ventilation for optimum and trouble-free
operation. The following minimum installation clearances are to be adhered to:
GT8600G model only
This model is delivered completely assembled. No further
assembly is required.
NOTE:
This appliance is fitted with adjustable feet to enable
it to be positioned securely and level on uneven
floors. This should be carried out on completion of
gas connection. Refer to 'Gas Connection Section'.
This appliance can also be fitted with rear rollers to
enable appliance to be easily moved for positioning
and cleaning purposes. If desired, these rollers are
supplied in packaging, with appliance. See below for
fitting instructions.
Optional Accessories (Refer to Replacement Parts
List)
Plinth Kit. For installation details, refer to
instructions supplied with each kit.
1. Raise appliance from floor by approx. 75mm
using suitable lifting equipment (i.e. Palletiser /
Forklift) to remove rear adjustable feet.
2. Unscrew and remove both rear adjustable feet
from rear leg housings.
3. Fit rear roller to rear leg housing and align
screw hole in side of rear leg housing with
threaded hole in rear roller.
4. Secure rear roller to leg support with bolt
supplied and tighten bolt using a 10mm A/F
spanner.
5. Fit second roller and tighten.
6. Lower appliance back to floor and adjust front
adjustable feet to level appliance.
Left / Right Hand Side 50mm 0mm
Rear 50mm 0mm
Fig 1
Appliance
Base
Adjustable
Foot
Rear Roller
Assy
Rear Leg
Housing
Roller
Locating Bolt
Loading ...
Loading ...
Loading ...